EN ISO 22518:2020

SLOVENSKI STANDARD
01-marec-2021
Barve in laki - Določevanje topil v premazih, ki se lahko razredčijo z vodo - Metoda
s plinsko kromatografijo (ISO 22518:2019)
Paints and varnishes - Determination of solvents in water-thinnable coating materials -
Gas-chromatographic method (ISO 22518:2019)
Beschichtungsstoffe - Bestimmung von Lösemitteln in wasserverdünnbaren
Beschichtungsstoffen - Gaschromatographisches Verfahren (ISO 22518:2019)
Peintures et vernis - Détermination des solvants dans des peintures diluable à l'eau -
Méthode par chromatographie en phase gazeuse (ISO 22518:2019)
Ta slovenski standard je istoveten z: EN ISO 22518:2020
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 22518
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 87.040
English Version
Paints and varnishes - Determination of solvents in water-
thinnable coating materials - Gas-chromatographic
method (ISO 22518:2019)
Peintures et vernis - Détermination des solvants dans Beschichtungsstoffe - Bestimmung von Lösemitteln in
des peintures diluable à l'eau - Méthode par wasserverdünnbaren Beschichtungsstoffen -
chromatographie en phase gazeuse (ISO 22518:2019) Gaschromatographisches Verfahren (ISO 22518:2019)
This European Standard was approved by CEN on 30 November 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22518:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 22518:2018 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2021, and conflicting national standards shall be
withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22518:2019 has been approved by CEN as EN ISO 22518:2020 without any modification.

INTERNATIONAL ISO
STANDARD 22518
First edition
2019-07
Paints and varnishes —
Determination of solvents in water-
thinnable coating materials — Gas-
chromatographic method
Peintures et vernis — Détermination des solvants dans des peintures
diluable à l'eau — Méthode par chromatographie en phase gazeuse
Reference number
ISO 22518:2019(E)
©
ISO 2019
ISO 22518:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 22518:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Units . 1
5 Principle . 1
6 Apparatus . 2
6.1 Gas chromatograph . 2
6.1.1 General. 2
6.1.2 Sample injection system . 2
6.1.3 Oven . 2
6.1.4 Detector . 2
6.1.5 Capillary separation column . 3
6.1.6 Injection syringe. 3
6.2 Data acquisition . 3
6.3 Sample vessel . 3
7 Reagents . 3
7.1 Gases . 3
7.2 Internal standard . 3
7.3 Calibration substances . 3
7.4 Diluents . 3
8 Sampling . 4
9 Choice of sample injection system . 4
10 Procedure. 4
10.1 Gas chromatographic conditions . 4
10.1.1 General. 4
10.1.2 Example of hot injection and gas chromatography of a water-thinnable
coating material . 4
10.1.3 Cold injection and gas chromatography of a water-thinnable coating
material (example) . . 6
10.2 Injection volume . 7
10.3 Calibration . 7
10.4 Sample preparation and analysis . 7
11 Expression of results . 8
12 Precision . 8
12.1 General . 8
12.2 Repeatability . 9
12.3 Reproducibility . 9
13 Test report . 9
Bibliography .11
ISO 22518:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison wit
...