EN 13369:2023
(Main)Common rules for precast concrete products
Common rules for precast concrete products
This document provides the specifications, the basic performance criteria and the Assessment and Verification of Constancy of Performance (AVCP) for unreinforced, reinforced and prestressed precast concrete products made of compact light-, normal- and heavyweight concrete according to EN 206 with no appreciable amount of entrapped air other than entrained air. Concrete containing fibres for other than mechanical properties (steel, polymer or other fibres) is also covered. It does not cover precast reinforced components of lightweight aggregate concrete with open structure nor glass-fibre reinforced concrete.
It can also be used to specify products for which there is no standard. Not all of the specifications (Clause 4) of this document are relevant to all precast concrete products.
Some European product standards refer to this document. They can include specific provisions that take precedence over the provisions of this document.
Allgemeine Regeln für Betonfertigteile
Dieses Dokument enthält die Festlegungen, die grundlegenden Leistungskriterien und die Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP, en: Assessment and Verification of Constancy of Performance) für unbewehrte Beton , Stahlbeton und Spannbetonfertigteile aus Leicht , Normal und Schwerbeton nach EN 206 fest, der so verdichtet wurde, dass er außer den Luftporen keine nennenswerten Lufteinschlüsse enthält. Faserbetone, deren Fasern keinen Einfluss auf die mechanischen Eigenschaften haben (Stahl , Polymer oder andere Fasern), werden ebenfalls abgedeckt. Es gilt nicht für Betonfertigteile aus haufwerksporigem Leichtbeton und Glasfaserbeton.
Es kann auch für spezielle Erzeugnisse angewendet werden, für die keine Normen existieren. Nicht alle Festlegungen (Abschnitt 4) dieses Dokumentes sind für alle Betonfertigteile maßgebend.
Einige Europäische Produktnormen enthalten Verweisungen auf dieses Dokument Sie können spezifische Bestimmungen enthalten, die Vorrang vor den Bestimmungen dieses Dokumentes haben.
Règles communes pour les produits préfabriqués en béton
Le présent document fournit les spécifications, les critères relatifs aux performances de base et l’Évaluation et la vérification de la constance des performances (EVCP) des produits préfabriqués non armés, armés et précontraints en béton léger, normal et lourd conformément à l’EN 206, sans quantité notable d’air occlus autre que l’air entraîné. Il couvre également le béton contenant des fibres (acier, polymère ou autre) pour d’autres propriétés que les propriétés mécaniques. Il ne couvre pas les produits préfabriqués armés en béton de granulats légers à structure ouverte et en composite ciment verre.
Il peut aussi être utilisé pour spécifier des produits pour lesquels il n’existe pas de norme. Les spécifications (Article 4) du présent document ne sont pas toutes applicables à l’ensemble des produits préfabriqués en béton.
Certaines normes de produits européennes se rapportent au présent document. Elles peuvent contenir des dispositions spécifiques qui ont la priorité sur les dispositions du présent document.
Splošna pravila za montažne betonske izdelke
Ta dokument določa zahteve, osnovna merila učinkovitosti ter ocenjevanje in preverjanje nespremenljivosti skladnosti za montažne izdelke iz nearmiranega, armiranega in prednapetega kompaktnega betona, ki je lahek, običajen ali težek, v skladu s standardom EN 206 brez znatne količine ujetega zraka, razen primešanega zraka. Standard zajema tudi beton, ki vsebuje vlakna zaradi drugih razlogov, kot so mehanske lastnosti (jeklo, polimer ali druga vlakna). Standard ne zajema montažnih armiranih komponent iz lahkega betona za agregate z odprto konstrukcijo in betona, ojačenega s steklenimi vlakni.
Uporabljati ga je mogoče tudi za določanje izdelkov, za katere standard ne obstaja. Vse zahteve (točka 4) tega standarda ne veljajo za vse montažne betonske izdelke.
Na ta standard se sklicujejo nekateri evropski standardi za izdelke. Vključujejo lahko posebna določila, ki imajo prednost pred določili tega standarda.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2024
Nadomešča:
SIST EN 13369:2018
Splošna pravila za montažne betonske izdelke
Common rules for precast concrete products
Allgemeine Regeln für Betonfertigteile
Règles communes pour les produits préfabriqués en béton
Ta slovenski standard je istoveten z: EN 13369:2023
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13369
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 91.100.30 Supersedes EN 13369:2018
English Version
Common rules for precast concrete products
Règles communes pour les produits préfabriqués en Allgemeine Regeln für Betonfertigteile
béton
This European Standard was approved by CEN on 28 August 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13369:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 6
Introduction . 8
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 10
3.1 General. 10
3.2 Dimensions. 11
3.3 Tolerances . 12
3.4 Durability . 12
3.5 Mechanical properties . 12
4 Specifications . 13
4.1 Material and components specifications. 13
4.1.1 General. 13
4.1.2 Constituent materials of concrete. 13
4.1.3 Reinforcing steel . 14
4.1.4 Prestressing steel . 14
4.1.5 Inserts and connectors . 14
4.2 Production specifications . 14
4.2.1 Concrete production . 14
4.2.2 Hardened concrete . 17
4.2.3 Structural reinforcement . 18
4.3 Finished product specifications. 20
4.3.1 Geometrical properties. 20
4.3.2 Surface characteristics . 22
4.3.3 Mechanical resistance . 22
4.3.4 Resistance and reaction to fire . 24
4.3.5 Acoustic properties . 24
4.3.6 Thermal properties . 25
4.3.7 Durability . 25
4.3.8 Other specifications . 26
5 Test methods . 27
5.1 Tests on concrete . 27
5.1.1 Compressive strength. 27
5.1.2 Water absorption . 27
5.1.3 Dry density of concrete . 27
5.2 Measuring of dimensions and surface characteristics . 28
5.3 Weight of the products . 28
6 Assessment and verification of constancy of performance . 28
6.1 General. 28
6.1.1 General. 28
6.1.2 Demonstration of compliance . 28
6.1.3 Assessment of constancy of performance . 29
6.1.4 Product families . 29
6.2 Assessment of the performance . 29
6.2.1 General . 29
6.2.2 Testing and compliance criteria. 30
6.3 Factory production control . 30
6.3.1 General . 30
6.3.2 Organization . 31
6.3.3 Control system . 31
6.3.4 Document control . 31
6.3.5 Process control . 31
6.3.6 Inspection and testing . 31
6.3.7 Non-compliant products . 32
6.3.8 Compliance criteria. 33
6.3.9 Indirect or alternative test method . 33
6.3.10 Initial inspection of factory and of FPC . 33
6.3.11 Continuous surveillance of FPC . 34
6.3.12 Procedure for modifications . 34
7 Marking . 34
8 Technical documentation . 35
Annex A (informative) Concrete cover as regard to corrosion . 36
A.1 Minimum concrete cover for base conditions . 36
A.2 Alternative conditions . 37
Annex B (informative) Concrete strength quality control . 38
B.1 Statistical representative values . 38
B.2 Compliance criteria for potential strength . 38
B.3 Direct structural strength . 38
B.4 Indirect structural strength . 38
B.5 Direct assessment of possibly non-conforming units . 39
Annex C (informative) Reliability considerations . 41
C.1 General . 41
C.2 Reduction based on quality control and reduced tolerances . 41
C.3 Reduction based on using reduced or measured geometrical parameters in design 42
C.4 Reduction based on assessment of concrete strength in finished structure . 42
C.5 Reduction of γ based on control of self-weight . 43
G
Annex D (normative) Inspection schemes . 44
D.1 General . 44
D.2 Equipment inspection . 44
D.3 Inspection of incoming materials . 46
D.4 Process inspection. 48
D.5 Finished product inspection . 52
D.6 Switching rules . 52
Annex E (informative) Assessment of compliance .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.