iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1169:2024

(Main)

Precast concrete products - General rules for production control of glassfibre reinforced concrete

Precast concrete products - General rules for production control of glassfibre reinforced concrete

This document defines the general processes, procedures and rules for production and production control system (PCS) of glassfibre reinforced concrete (GRC) used to manufacture products commonly used in construction, civil engineering, architecture and other applications.
GRC can be produced from a range of mix designs comprising various materials and manufactured by different processes. This document covers two primary production processes, namely sprayed GRC and premix GRC.
This document does not cover concrete, where the glassfibre does not act as primary reinforcement but is used as an additive. It does not cover but can be used as guidance for injection and extrusion manufacturing processes.

Vorgefertigte Betonerzeugnisse - Allgemeine Regeln für die werkseigene Produktionskontrolle von Glasfaserbeton

Produits préfabriqués en béton - Règles générales de contrôle de production des composites ciment-verre

Le présent document définit les procédés généraux, les procédures et les règles pour la fabrication et le contrôle de la production de composite ciment-verre servant à fabriquer des produits couramment employés pour la construction, en génie civil, en architecture et pour d’autres applications.
Le composite ciment-verre peut être produit à partir d’une gamme de formulations comprenant divers matériaux et être fabriqué par différents procédés. Le présent document couvre deux procédés de fabrication primaires, à savoir le CCV projeté et le CCV prémix.
Le présent document ne traite pas du béton dans lequel les fibres de verre ne servent pas de renforcement primaire, mais sont utilisées comme addition. Il ne traite pas des procédés de fabrication par injection et extrusion, mais il peut être utilisé comme guide.

Montažni betonski izdelki - Splošna pravila za notranjo kontrolo proizvodnje steklobetonskega kompozita

General Information

Status
Published
Publication Date
17-Dec-2024
ICS
91.100.30 - Concrete and concrete products
Technical Committee
CEN/TC 229 - Precast concrete products
Drafting Committee
CEN/TC 229/WG 3 - Products for which the stability requirements is not dominant
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Dec-2024
Due Date
18-Dec-2024
Completion Date
18-Dec-2024
Ref Project
SIST EN 1169:2025 - Precast concrete products - General rules for factory production control of glassfibre reinforced concrete

Relations

Replaces
EN 1169:1999 - Precast concrete products - General rules for factory production control of glass-fibre reinforced cement
Effective Date
19-Apr-2023

Buy Standard

EN 1169:2025EN 1169:2025
PreviousNext
Standard
EN 1169:2025
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2025
Nadomešča:
SIST EN 1169:2001
Montažni betonski izdelki - Splošna pravila za notranjo kontrolo proizvodnje
steklobetonskega kompozita
Precast concrete products - General rules for factory production control of glassfibre
reinforced concrete
Vorgefertigte Betonerzeugnisse - Allgemeine Regeln für die werkseigene
Produktionskontrolle von Glasfaserbeton
Produits préfabriqués en béton - Règles générales pour le contrôle de la production en
usine des composites ciment-verre
Ta slovenski standard je istoveten z: EN 1169:2024
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 1169
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 91.100.30 Supersedes EN 1169:1999
English Version
Precast concrete products - General rules for production
control of glassfibre reinforced concrete
Produits préfabriqués en béton - Règles générales de Vorgefertigte Betonerzeugnisse - Allgemeine Regeln
contrôle de production des composites ciment-verre für die werkseigene Produktionskontrolle von
Glasfaserbeton
This European Standard was approved by CEN on 1 December 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1169:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Definitions and abbreviation . 6
3.1 Definitions . 6
3.2 Symbols and abbreviated terms . 8
4 Production control system . 8
4.1 General. 8
4.2 Organization . 8
4.3 Production control system . 9
4.4 Document control . 9
4.5 Process control . 9
4.6 Assessment and testing . 9
4.6.1 General. 9
4.6.2 Equipment . 9
4.6.3 Materials . 10
4.6.4 Production process . 10
4.6.5 Finished GRC composite material . 10
4.7 Non-conforming GRC composite material . 10
4.8 Conformity criteria for mechanical strength . 10
4.9 Initial assessment of the PCS . 11
4.10 Continuous surveillance of PCS . 12
4.11 Procedure for modifications . 12
5 Control of raw materials . 12
5.1 General. 12
5.2 Reception controls. 12
5.3 Storage of raw material . 13
6 Materials batching and mixing . 13
6.1 Materials batching . 13
6.2 Control of batching and weighing equipment . 13
6.3 Mixing . 13
6.3.1 General. 13
6.3.2 Mixing – Matrix for sprayed GRC . 13
6.3.3 Mixing – Premix GRC for casting or spraying . 14
6.4 Verification of the mix . 14
6.4.1 Description . 14
6.4.2 Mix record keeping . 14
7 Production process . 14
7.1 General. 14
7.2 GRC composite groups . 15
7.3 Sprayed GRC . 15
7.3.1 Sprayed GRC – Description of manufacturing process . 15
7.3.2 Calibration and regulation control of the spray equipment (to ensure the minimum
glassfibre content) . 15
7.4 Premix GRC - Description of manufacturing process . 15
7.4.1 General . 15
7.4.2 Premix GRC - Cast premix . 16
7.4.3 Premix GRC - Sprayed premix . 16
7.5 Directional AR glassfibre introduced in the production process . 16
7.6 Curing . 16
8 Controls of fresh and hardened GRC . 17
8.1 General . 17
8.2 Type tests . 17
8.3 Controls of the fresh GRC . 17
8.4 Processing time limits . 17
8.5 Controls of the hardened GRC . 18
8.5.1 General . 18
8.5.2 Production of the test boards . 18
8.5.3 Testing . 18
Annex A (normative) Guidelines for establishment of the production control system . 19
Annex B (informative) Control tests on fresh GRC: Premix GRC process . 21
Annex C (informative) Control tests on fresh GRC: Spray GRC process . 22
Annex D (informative) Summary of control tests on hardened GRC . 23
Bibliography . 25

European foreword
This document (EN 1169:2024) has been prepared by Technical Committee CEN/TC 229 “Precast
concrete products”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2025, and conflicting national standards shall be
withdrawn at the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1169:1999.
— clarification of the scope, with precision about what is covered and what is excluded;
— modification of the symbols used in coherence with EN 1170 and EN 15191;
— updated reference to the new EN 1170:2024 as resulting of the revision and merging of parts of the
EN 1170 series;
— technical modifications in accordance with EN 1170:2024.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Lat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15191:2024(Main)
Precast concrete products - Classification of glassfibre reinforced concrete performance
SIST EN 15191:2025

This document deals with the classification of glassfibre reinforced concrete. This classification conforms to the needs of the design process of glassfibre reinforced concrete components. This document applies only if EN 1169 is followed.
This document does not deal with design methods.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1170:2024(Main)
Precast concrete products - Test methods for glassfibre reinforced concrete
SIST EN 1170:2025

This document specifies test methods for identifying the performance of a glassfibre reinforced concrete (GRC) composition in terms of bending strength, water absorption, dry density and dimensional variations.
These methods can be used for type testing or for the evaluation of the uniformity of the production process. They can be used on GRC coupons prepared as described in this document, or on samples cut out of GRC products.
NOTE    A test to assess the influence of time on the mechanical properties (i.e. LOP and MOR) is described for information in Annex C. Other methods can be found in scientific literature.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13369:2023(Main)
Common rules for precast concrete products
SIST EN 13369:2024

This document provides the specifications, the basic performance criteria and the Assessment and Verification of Constancy of Performance (AVCP) for unreinforced, reinforced and prestressed precast concrete products made of compact light-, normal- and heavyweight concrete according to EN 206 with no appreciable amount of entrapped air other than entrained air. Concrete containing fibres for other than mechanical properties (steel, polymer or other fibres) is also covered. It does not cover precast reinforced components of lightweight aggregate concrete with open structure nor glass-fibre reinforced concrete.
It can also be used to specify products for which there is no standard. Not all of the specifications (Clause 4) of this document are relevant to all precast concrete products.
Some European product standards refer to this document. They can include specific provisions that take precedence over the provisions of this document.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16757:2022(Main)
Sustainability of construction works - Environmental product declarations - Product Category Rules for concrete and concrete elements
SIST EN 16757:2023

This document complements the core rules for the product category of construction products as defined in EN 15804:2012+A2:2019 and is intended to be used as a c-PCR in conjunction with that standard.
This c-PCR applies to products within the scope of CEN/TC 104 and CEN/TC 229, but it may be applicable to other concrete products until they have product specific c-PCRs.
This document applies to concrete and concrete elements for building and civil engineering, but excludes autoclaved aerated concrete and resin bound concrete. Apart from Annex G, it may be used as guidance for glass fibre reinforced concrete.
This document defines the parameters to be reported, what EPD types (and life cycle stages) to be covered, what rules to be followed in order to generate Life Cycle Inventories (LCI) and conduct Life Cycle Impact Assessment (LCIA) and the data quality to be used in the development of EPDs.
In addition to the common parts of EN 15804:2012+A2:2019, this document for concrete and concrete elements:
-   defines the system boundaries;
-   defines the modelling and assessment of material-specific characteristics;
-   defines allocation procedures for multi-output processes along the production chain;
-   defines allocation procedures for reuse and recycling;
-   includes the rules for calculating the LCI and the LCIA underlying the EPD;
-   provides guidance/specific rules for the determination of the reference service life (RSL);
-   gives guidance on the establishment of default scenarios;
-   gives guidance on default functional units for concrete elements.
This document is intended to be used either for cradle to gate with options or cradle to grave assessment, provided the intentions are properly stated in the system boundary description.
Within the construction works context, a cradle to grave declaration delivers a more comprehensive understanding of the environmental impact associated with concrete and concrete elements.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 15728:2016(Main)
Design and use of inserts for lifting and handling of precast concrete elements
SIST-TP CEN/TR 15728:2016

1.1   General
This Technical Report provides recommendations for the choice and use of cast-in steel lifting inserts, hereafter called 'inserts' for the handling of precast concrete elements. They are intended for use only during transient situations for lifting and handling, and not for the service life of the structure. The choice of insert is made according to the lifting capacity of their part embedded in the concrete, or may be limited by the capacity of the insert itself and the corresponding key declared by the insert manufacturer.
The report covers commonly used applications (walls/beams/columns and solid slabs and pipes). The range of these applications is further limited to prevent other types of failure than concrete breakout failure (cone failure), bond failure, failure of reinforcement or failure in the steel insert.
Due to lack of information this report does not cover double shell walls, floor plates and beams for beam-and-block floor systems.
The safety levels are given for information and are intended for short-term-handling and transient situations.
This Technical Report applies only to precast concrete elements made of normal weight concrete and manufactured in a factory environment and under a factory production control (FPC) system (in accordance with EN 13369:2013, 6.3) covering the insert embedment.
This Technical Report does not cover:
-   the design of the lifting inserts independently placed on the market;
-   lifting inserts for permanent and repeated use.
This Technical Report is prepared based on the fact that the anchorage in the concrete of parts of the lifting assembly is governed by the Construction Products Regulation. Lifting accessories independently placed on the market are governed by the Machinery Directive.
1.2   Types of inserts for lifting and handling
This Technical Report applies to the embedment of lifting inserts. Devices made by the precaster may consist of smooth bars, prestressing strands, steel plates with anchorage or steel wire ropes. The system devices may be e.g. internal threaded inserts, flat steel inserts and headed inserts.
Lifting loops of ribbed bars are not covered.
1.3   Minimum dimensions
This Technical Report applies in general to inserts with a minimum nominal diameter of 6 mm or the corresponding cross section. In general, the minimum anchorage depth should be hef = 40 mm.
Wire ropes of diameter less than 6 mm are not covered.

  • Technical report
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15037-4:2010+A1:2013(Main)
Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks
SIST EN 15037-4:2010+A1:2013

This European Standard deals with the requirements and the basic performance criteria for blocks made in expanded polystyrene (EPS), used in conjunction with precast concrete beams in compliance with
EN 15037-1, with or without cast-in-situ concrete for the construction of beam-and-block floor systems.
EPS block may be totally made in EPS or combined with different materials such as plaster or wood wool.
If EPS is combined with other materials, these materials should not contribute to more than 50 % of the mechanical resistance of the block. If not, the block is covered by EN 15037-5, Precast concrete products - Beam-and-block floor systems - Part 5: Lightweight blocks for simple formwork.
Examples of typology of floor systems are given in Annex B of EN 15037-1:2008.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15037-5:2013(Main)
Precast concrete products - Beam-and-block floor systems - Part 5: Lightweight blocks for simple formwork
SIST EN 15037-5:2013

This European Standard deals with the requirements and the basic performance criteria for lightweight blocks used as formwork during the construction of the floor system. The blocks are used in conjunction with precast concrete beams in compliance with EN 15037-1, with or without cast-in-situ concrete for the construction of beam-and-block floor systems.
This European Standard does not deal with blocks made in polystyrene, with or without tong, or combined with different materials where polystyrene contributes to more than 50 % of the mechanical resistance of the block. These blocks are covered by EN 15037-4, Precast concrete products — Beam-and-block floor systems  Part 4: Expanded polystyrene blocks.
Examples of typology of floor systems are given in Annex B of EN 15037-1:2008.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13225:2013(Main)
Precast concrete products - Linear structural elements
SIST EN 13225:2013

This European Standard identifies the requirements, the basic performance criteria and evaluation of conformity for precast linear elements (such as columns, beams and frame elements) made of reinforced or prestressed normal or lightweight concrete, used for the construction of the structures of buildings and other civil engineering works, except bridges.
This document covers terminology, performance criteria, tolerances, relevant physical properties, test methods, and aspects of transport and erection.
This document does not cover load bearing capacity determined by testing.
This standard does not cover lintels with length up to 4,5 m used in masonry walls.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14992:2007+A1:2012(Main)
Precast concrete products - Wall elements
SIST EN 14992:2007+A1:2012

This European Standard applies to prefabricated walls, made of normal weight or lightweight concrete with dense structure. Also fibre reinforced concrete (steel, polymer or other fibres covered by European standards) may be used. These wall elements may have external wall functions (see 3.11) or not, have facing functions (see 3.12) or not or have a combination of these functions.
External wall functions could be:
-   thermal insulation (see 3.11.1);
-   sound insulation (see 3.11.2);
-   hygrometric control (see 3.11.3);
or a combination of these.
They may be plain, reinforced or prestressed. They may be loadbearing or not.
These include:
-   solid walls;
-   composite walls;
-   sandwich walls;
-   lightened walls;
-   claddings.
The wall element may also work as a column or beam.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15050:2007+A1:2012(Main)
Precast concrete products - Bridge elements
SIST EN 15050:2007+A1:2012

This European Standard applies to precast concrete structural elements produced in a factory and used in bridge construction, such as deck elements.Normal weight concrete elements are considered, both reinforced and prestressed; their use can be on road bridges, railway bridges and footbridges.
Deck elements include both single elements from which the deck may be composed (beams, slabs, ribbed or cellular elements) and elements consisting of a segment of the entire deck.
Some examples of elements dealt with are shown in Annex A.
The durability aspects are also considered.
This European Standard makes reference to precast elements produced in a factory or near the construction site in a place protected from adverse weather conditions. It is assumed that if the elements are not manufactured in a factory, the production conditions assure the same level of quality control as in a factory. It is assumed that the production place is protected from rain, sunshine and wind.
Some of the elements are also treated in other European Standards (e.g. beams, slabs). This European Standard deals with the specific aspects related to the use of these elements in bridge construction.
Foundation piles, piers, abutments, barriers, bumpers, guards, arches and" box culverts are out the scope of this European Standard.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day