EN 13225:2013
(Main)Precast concrete products - Linear structural elements
Precast concrete products - Linear structural elements
This European Standard identifies the requirements, the basic performance criteria and evaluation of conformity for precast linear elements (such as columns, beams and frame elements) made of reinforced or prestressed normal or lightweight concrete, used for the construction of the structures of buildings and other civil engineering works, except bridges.
This document covers terminology, performance criteria, tolerances, relevant physical properties, test methods, and aspects of transport and erection.
This document does not cover load bearing capacity determined by testing.
This standard does not cover lintels with length up to 4,5 m used in masonry walls.
Betonfertigteile - Stabförmige tragende Bauteile
Diese Europäische Norm legt die Anforderungen, die grundlegenden Leistungskriterien und die Konformitäts-bewertung für stabförmige Betonfertigteile (wie z. B. Stützen, Träger und Rahmenelemente) aus bewehrtem oder vorgespanntem Normal- oder Leichtbeton fest, die im Hoch- und Tiefbau mit Ausnahme des Brückenbaus eingesetzt werden.
In diesem Dokument werden Begriffe, Leistungskriterien, Toleranzen, die maßgebenden physikalischen Eigenschaften, Prüfverfahren und Aspekte von Transport und Aufbau festgelegt.
Dieses Dokument gilt nicht für die durch die Prüfung bestimmte Tragfähigkeit.
Diese Norm gilt nicht für Stahlbetonträger mit einer Länge von bis zu 4,5 m, welche in Mauerwerkswenden verwendet werden
Produits préfabriqués en béton - Éléments de structure linéaires
La présente Norme européenne spécifie les prescriptions, les critères relatifs aux performances de base et l’évaluation de la conformité des éléments linéaires préfabriqués (tels que les poteaux, les poutres et les éléments de portiques) fabriqués en béton de granulats courants ou légers, armé ou précontraint, et utilisés pour la construction de structures de bâtiments et d’autres ouvrages de génie civil, à l’exception des ponts.
Le présent document couvre la terminologie, les critères relatifs aux performances, les tolérances, les propriétés physiques pertinentes, les méthodes d’essai et les aspects liés au transport et à la mise en œuvre.
Il ne couvre pas la capacité portante déterminée par des essais.
Il ne couvre pas les linteaux d’une longueur inférieure ou égale à 4,5 m utilisés dans les murs en maçonnerie.
Montažni betonski izdelki - Linijski konstrukcijski elementi
Ta evropski standard opredeljuje zahteve, osnovna merila učinkovitosti in vrednotenje skladnosti za montažne linijske elemente (kot so stebri, tramovi in okvirni elementi), narejene iz armiranega ali prednapetega običajnega ali lahkega betona, ki se uporabljajo za gradnjo struktur zgradb in drugih inženirskih objektov z izjemo mostov. Ta dokument zajema izrazje, merila učinkovitosti, tolerance, ustrezne fizikalne lastnosti, preskusne metode ter vidike transporta in postavitve. Ta dokument ne vključuje nosilnosti, ki se določi s preskušanjem. Ta standard ne vključuje preklad z dolžino do 4,5 m, ki se uporabljajo v zidovih.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Montažni betonski izdelki - Linijski konstrukcijski elementiBetonfertigteile - Stabförmige BetonbauteileProduits préfabriqués en béton - Éléments de structure linéairesPrecast concrete products - Linear structural elements91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 13225:2013SIST EN 13225:2013en,fr,de01-september-2013SIST EN 13225:2013SLOVENSKI
STANDARDSIST EN 13225:2004/AC:2007SIST EN 13225:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13225
April 2013 ICS 91.100.30 Supersedes EN 13225:2004English Version
Precast concrete products - Linear structural elements
Produits préfabriqués en béton - Éléments de structure linéaires
Betonfertigteile - Stabförmige tragende Bauteile This European Standard was approved by CEN on 19 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13225:2013: ESIST EN 13225:2013
Precautions about lateral buckling of beams. 14 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Constructions Products Directive . 16 ZA.1 Scope and relevant characteristics . 16 ZA.2 Procedure for attestation of conformity of linear precast concrete structural elements . 18 ZA.2.1 System of attestation of conformity . 18 ZA.2.2 EC Certificate and Declaration of conformity . 20 ZA.3 CE marking and labelling . 21 ZA.3.1 General . 21 ZA.3.2 Declaration of geometrical data and material properties (method 1) . 22 ZA.3.3 Declaration of product properties (method 2). 25 ZA.3.4 Declaration of compliance with a design specification provided by the client (method 3a) . 28 ZA.3.5 Declaration of compliance with a design specification provided by the manufacturer according to the client’s order (method 3b) . 30 Bibliography. 33
a) addition of lightweight concrete in the Scope; b) change in subclause 4.3.3.3 Seismic behaviour; c) addition of subclause 4.3.9 Dangerous substances;
d) changes referring to dangerous substances in Annex ZA. This standard is one of a series of product standards for precast concrete products. For common aspects reference is made to EN 13369 Common rules for precast products, from which also the relevant requirements of the EN 206-1 Concrete — Part 1: Specification, performances, production and conformity are taken. The references to EN 13369 by CEN/TC 229 product standards are intended to make them homogeneous and to avoid repetitions of similar requirements. This standard was examined by and agreed with a joint working group party appointed by the Liaison group CEN/TC 229 – CEN/TC 250, particularly for its compatibility with structural Eurocodes. Eurocodes are taken as a common reference for design aspects. The installation of some structural precast concrete products is dealt with by EN 13670 Execution of concrete structures.
The programme of standards for structural precast concrete products comprises the following standards, in some cases consisting of several parts: EN 1168, Precast concrete products — Hollow core slabs EN 12794, Precast concrete products — Foundation piles EN 12843, Precast concrete products — Masts and poles EN 13224, Precast concrete products — Ribbed floor elements SIST EN 13225:2013
EN 14844, Precast concrete products — Box culverts EN 14991, Precast concrete products — Foundation elements EN 14992, Precast concrete products — Wall elements EN 15037, Precast concrete products — Beam-and-block floor systems EN 15258, Precast concrete products — Retaining wall elements EN 15050, Precast concrete products — Bridge elements This standard defines in Annex ZA the application methods of CE marking to products designed using the relevant EN Eurocodes (EN 1992-1-1, EN 1992-1-2 and EN 1998-1). Where, in default of applicability conditions of EN Eurocodes to the works of destination, design provisions other than EN Eurocodes are used for mechanical strength and/or fire resistance, the conditions to affix CE marking to the product are described in ZA.3.4. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
This document covers terminology, performance criteria, tolerances, relevant physical properties, test methods, and aspects of transport and erection. This document does not cover load bearing capacity determined by testing.
This standard does not cover lintels with length up to 4,5 m used in masonry walls. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1992-1-1:2004, Eurocode 2: Design of concrete structures — Part 1-1: General rules and rules for buildings EN 1998-1:2004, Eurocode 8: Design of structures for earthquake resistance — Part 1: General rules, seismic actions and rules for buildings EN 13369:2013, Common rules for precast concrete products 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13369:2013 and the following apply. NOTE In general, the term “product” refers to an element which is produced in large numbers. 3.1 beam element, usually horizontal, for carrying loads primarily by flexure 3.2 column vertical bearing element subject mainly to compression 3.3 frame structure composed of two or more linear elements joined together to ensure stability
4 Requirements 4.1 Material requirements For general aspects, constituent materials of concrete, reinforcing and prestressing steel, inserts and connectors, the relevant clauses of EN 13369:2013, 4.1 shall apply. In particular, the ultimate tensile and tensile yield strength of steel shall be considered. SIST EN 13225:2013
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.