EN 851:1995
(Main)Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications
This standard specifies the particular requirements for wrought aluminium and aluminium alloys in the form of circle or circle stock for culinary utensil applications. This standard is applicable to: - circles made out of hot or cold-rolled circle stock, with a thickness from 0,2 mm up to and including 12 mmand with a diameter from 100 mm up to and including 1 600 mm. Note: Circles witha diameter up to 1 000 mm may be produced by blanking. - hot or cold-rolled circle stock with a thickness from 0,2 mm up to and including 12 mm and with a width up to 1 600 mm.
Aluminium und Aluminiumlegierungen - Ronden und Rondenvormaterial zur Herstellung von Küchengeschirr - Spezifikationen
Die vorliegende Norm legt die besonderen Anforderungen für Ronden und Rondenvormaterial aus Aluminium und Aluminium-Knetlegierungen fest, die zur Herstellung von Küchengeschirr eingesetzt werden. Sie gilt für: - Ronden, die aus kalt- bzw. warmgewalztem Rondenvormaterial mit einer Dicke von 0,2 mm bis 12 mm und einem Durchmesser von 100 mm bis 1600 mm hergestellt werden. Ronden mit einem Durchmesser bis 1000 mm können durch Stanzen (geschlossener Schnitt) hergestellt werden; - kalt- bzw. warmgewalztes Rondenvormaterial mit einer Dicke von 0,2 mm bis 12 mm und einer Breite bis 1600 mm.
Aluminium et alliages d'aluminium - Disques et ébauches pour disques pour applications culinaires - Spécifications
Cette norme européenne spécifie les exigences particulières applicables aux aluminium et alliages d'aluminium corroyés sous forme de disques et ébauches à disques destinés à la fabrication d'ustensiles culinaires. Elle s'applique aux: - disques fabriqués à partir d'ébauches à disques laminées à chaud ou à froid, d'épaisseur comprise entre 0,2 mm et 12 mm inclus, et de diamètre compris entre 100 mm et 1600 mm inclus. Les disques dont le diamètre n'excède pas 1000 mm peuvent être obtenus par poinçonnage; - ébauches à disques laminées à chaud ou à froid, d'épaisseur comprise entre 0,2 et 12 mm inclus et de largeur < 1600 mm.
Aluminij in aluminijeve zlitine - Rondele in polizdelki za izdelavo jedilnih pripomočkov in posodja - Specifikacije
General Information
- Status
- Withdrawn
- Publication Date
- 27-Jun-1995
- Withdrawal Date
- 29-Apr-2014
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 7 - Sheets, strips and plates
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 30-Apr-2014
- Completion Date
- 30-Apr-2014
Relations
- Effective Date
- 08-Jun-2022
Frequently Asked Questions
EN 851:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications". This standard covers: This standard specifies the particular requirements for wrought aluminium and aluminium alloys in the form of circle or circle stock for culinary utensil applications. This standard is applicable to: - circles made out of hot or cold-rolled circle stock, with a thickness from 0,2 mm up to and including 12 mmand with a diameter from 100 mm up to and including 1 600 mm. Note: Circles witha diameter up to 1 000 mm may be produced by blanking. - hot or cold-rolled circle stock with a thickness from 0,2 mm up to and including 12 mm and with a width up to 1 600 mm.
This standard specifies the particular requirements for wrought aluminium and aluminium alloys in the form of circle or circle stock for culinary utensil applications. This standard is applicable to: - circles made out of hot or cold-rolled circle stock, with a thickness from 0,2 mm up to and including 12 mmand with a diameter from 100 mm up to and including 1 600 mm. Note: Circles witha diameter up to 1 000 mm may be produced by blanking. - hot or cold-rolled circle stock with a thickness from 0,2 mm up to and including 12 mm and with a width up to 1 600 mm.
EN 851:1995 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 851:1995 has the following relationships with other standards: It is inter standard links to EN 851:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 851:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH5RQGHOHLQSROL]GHONL]DL]GHODYRMHGLOQLK
SULSRPRþNRYLQSRVRGMD6SHFLILNDFLMH
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary
utensils - Specifications
Aluminium und Aluminiumlegierungen - Ronden und Rondenvormaterial zur Herstellung
von Küchengeschirr - Spezifikationen
Aluminium et alliages d'aluminium - Disques et ébauches pour disques pour applications
culinaires - Spécifications
Ta slovenski standard je istoveten z: EN 851:1995
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...