EN 1124-1:1999
(Main)Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
This European Standard specifies requirements, tests and quality control for longitudinally welded, stainless steel pipes and fittings with spigot and socket for use in waste water systems usually operating under gravity or at low head of pressure. For the purposes of this standard, components are pipes, fittings, joints and seals. This standard is for components used for the discharge of: - domestic waste water; - surface water and - goundwater.
Rohre und Formstücke aus längsnahtgeschweißtem, nichtrostendem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 1: Anforderungen, Prüfungen, Güteüberwachung
Diese Europäische Norm legt Anforderungen, Prüfungen und die Güteüberwachung für Rohre und Formstücke mit Steckmuffe aus längsnahtgeschweißtem, nichtrostendem Stahlrohr zum Bau von Abwasserleitungen, die in der Regel drucklos betrieben werden, fest. Bauteile im Sinne dieser Norm sind Rohre, Formstücke, Rohrverbindungen und Dichtmittel. Diese Norm gilt für Bauteile, die für das Ableiten von - häusichem Abwasser; - Oberflächenwasser und - Grundwasser verwendet werden.
Tubes et raccords de tube soudés longitudinalement en acier inoxydable, à manchon enfichable pour réseaux d'assainissement - Partie 1: Prescriptions, essais, contrôle de qualité
La présente norme européenne a pour but de définir les prescriptions, essais et contrôle qualité des tubes et raccords à manchon enfichable en acier inoxydable, soudés longitudinalement, pour les canalisations d'eau résiduaires fonctionnant habituellement par gravité ou sans faible pression. Pour les besoins de la présente norme, les éléments sont des tubes, des raccords, des joints et des garnitures d'étanchéité. Cette norme s'applique à des éléments utilisés pour l'évacuation: - des eaux usées domestiques; - des eaux de surface; - des eaux souterraines.
Vzdolžno varjene nerjavne jeklene cevi in spojniki z obojko za sisteme za odpadno vodo - 1. del: Zahteve, preskušanje in kontrola kakovosti
General Information
- Status
- Published
- Publication Date
- 19-Jan-1999
- Technical Committee
- CEN/TC 165 - Waste water engineering
- Drafting Committee
- CEN/TC 165/WG 7 - Steel pipes
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 09-Jun-2022
- Completion Date
- 14-Apr-2025
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Overview
EN 1124-1:1999 (CEN) specifies the requirements, testing and quality control for longitudinally welded stainless steel pipes and fittings with spigot and socket connections intended for use in waste water systems. The standard covers components - pipes, fittings, joints and seals - used primarily in external sewage contexts operating under gravity or at low head of pressure. Typical discharges covered include domestic waste water, surface water and groundwater.
Key Topics
- Scope and applicability: Defines component types (longitudinally welded stainless steel pipes, spigot-and-socket fittings) and service conditions (gravity flow/low pressure) relevant to external sewage systems.
- Materials and construction: Requirements for stainless steel components and longitudinal weld integrity applicable to waste water conveyance.
- Dimensional and performance requirements: Specified tolerances and performance expectations for pipes, fittings, joints and seals to ensure proper fit and hydraulic performance.
- Testing procedures: Mandatory testing and inspection regimes to verify material properties, weld quality, dimensional conformity and joint tightness (general categories of verification are required by the standard).
- Quality control and documentation: Factory production control, sampling, test records and traceability requirements to support consistent manufacturing quality and compliance.
- Intended fluids: Clarifies applicability to domestic waste water, surface water and groundwater - not for high-pressure industrial applications.
Applications
EN 1124-1:1999 is used where stainless steel, longitudinally welded pipe systems are specified for external sewage and drainage installations:
- Municipal sewer mains and lateral connections operating by gravity
- Surface water drainage and stormwater conveyance
- Sub-surface drainage handling groundwater
- Site drainage for residential, commercial and light-industrial developments
Using longitudinally welded stainless steel pipes with spigot-and-socket joints provides corrosion resistance, durable welds and ease of installation for gravity or low-head systems.
Who uses this standard
- Manufacturers of stainless steel pipes, fittings and sealing systems - for design, production and factory quality control
- Civil and sanitary engineers specifying materials for external sewage projects
- Contractors and installers specifying compatible fittings and joint systems
- Testing laboratories and conformity assessment bodies performing required inspections
- Procurement officers and regulators ensuring compliance with CEN requirements
Related standards
EN 1124-1:1999 should be considered alongside other European and national standards covering sewer design, stainless steel material specifications and jointing systems. Refer to CEN documents and national implementations for harmonized requirements and national adaptations.
Keywords: EN 1124-1:1999, longitudinally welded stainless steel pipes, spigot and socket, waste water systems, requirements, testing, quality control, CEN.
Frequently Asked Questions
EN 1124-1:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control". This standard covers: This European Standard specifies requirements, tests and quality control for longitudinally welded, stainless steel pipes and fittings with spigot and socket for use in waste water systems usually operating under gravity or at low head of pressure. For the purposes of this standard, components are pipes, fittings, joints and seals. This standard is for components used for the discharge of: - domestic waste water; - surface water and - goundwater.
This European Standard specifies requirements, tests and quality control for longitudinally welded, stainless steel pipes and fittings with spigot and socket for use in waste water systems usually operating under gravity or at low head of pressure. For the purposes of this standard, components are pipes, fittings, joints and seals. This standard is for components used for the discharge of: - domestic waste water; - surface water and - goundwater.
EN 1124-1:1999 is classified under the following ICS (International Classification for Standards) categories: 23.040.05 - Pipeline and its parts for external sewage systems; 23.040.10 - Iron and steel pipes; 23.040.40 - Metal fittings; 23.040.60 - Flanges, couplings and joints. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1124-1:1999 has the following relationships with other standards: It is inter standard links to EN 1124-1:1999/A1:2004; is excused to EN 1124-2:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1124-1:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/136. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 1124-1:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vzdolžno varjene nerjavne jeklene cevi in spojniki z obojko za sisteme za odpadno vodo - 1. del: Zahteve, preskušanje in kontrola kakovostiRohre und Formstücke aus längsnahtgeschweißtem, nichtrostendem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 1: Anforderungen, Prüfungen, GüteüberwachungTubes et raccords de tube soudés longitudinalement en acier inoxydable, a manchon enfichable pour réseaux d'assainissement - Partie 1: Prescriptions, essais, contrôle de qualitéPipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water
...
記事のタイトル：EN 1124-1:1999 - ごみ水システム用のスパイグットとソケットを備えた縦溶接ステンレス鋼パイプと継手 - 第1部：要件、試験、品質管理 記事内容：このヨーロッパ規格は、通常重力や低圧で稼働するごみ水システムで使用されるスパイグットとソケットを備えた縦溶接ステンレス鋼パイプと継手に対する要件、試験、品質管理を示しています。この規格では、パイプ、継手、接合部、シールをコンポーネントとして扱います。この規格は以下の構成要素に対して使用されるものです：家庭排水、雨水、地下水。
The article discusses EN 1124-1:1999, a European standard that outlines the requirements, testing, and quality control for longitudinally welded stainless steel pipes and fittings with spigot and socket. These components are used in waste water systems that operate under gravity or at low pressure. The standard covers components used for the discharge of domestic waste water, surface water, and groundwater.
기사 제목: EN 1124-1:1999 - 배수 시스템용 스파이고트 및 소켓이 있는 세로 용접 스테인레스 강관과 피팅 - 파트 1: 요구 사항, 시험, 품질 관리 기사 내용: 이 유럽 표준은 일반적으로 중력 하에서 또는 낮은 압력으로 운영되는 배수 시스템에서 사용되는 스파이고트 및 소켓이 있는 세로 용접 스테인레스 강관과 피팅에 대한 요구 사항, 시험 및 품질 관리를 규정합니다. 이 표준에서 구성 요소로는 강관, 피팅, 연결부 및 밀봉물이 포함됩니다. 이 표준은 다음과 같은 것들을 배출하는 구성 요소를 위한 것입니다: 가정용 하수, 지표수 및 지하수.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...