Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids

This document specifies requirements for chemical and physical properties, and minimum performance requirements of low expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking.
NOTE   Some concentrates conforming to this part of EN 1568 can also conform to other parts and therefore can also be suitable for application as medium and/or high expansion foams, and for application at low expansion to water-miscible liquids.

Feuerlöschmittel - Schaummittel - Teil 3: Anforderungen an Schaummittel zur Erzeugung von Schwerschaum zum Aufgeben auf nicht-polare (mit Wasser nicht mischbare) Flüssigkeiten

Dieses Dokument legt Anforderungen an chemische und physikalische Eigenschaften und Anforderungen an die
Mindestanforderungen an die Leistungsfähigkeit von Schwerschäumen fest, die für die Aufgabe auf nicht-polare
(mit Wasser nicht mischbare) Flüssigkeiten geeignet sind. Anforderungen an die Kennzeichnung sind ebenfalls
festgelegt.
ANMERKUNG Einige diesem Teil von EN 1568 entsprechende Schaummittel können auch mit den anderen Teilen
übereinstimmen und deshalb auch für die Anwendung als Leicht- und/oder Mittelschäume bzw. als Schwerschäume zur
Aufgabe auf polare (mit Wasser mischbare) Flüssigkeiten geeignet sein.

Agents extincteurs - Emulseurs - Partie 3: Spécifications pour les émulseurs bas foisonnement destinés à une application à la surface de liquides n’ayant pas d’affinité pour l’eau

La présente Norme européenne spécifie les exigences en matière de propriétés chimiques, physiques et de performances minimales des émulseurs bas foisonnement convenant à une application à la surface des liquides n'ayant pas d'affinité pour l'eau. Des exigences concernant les marquages sont également fournies.
NOTE   Il se peut que certains émulseurs conformes à la présente partie de l'EN 1568 soient également conformes à d'autres parties de cette même norme et conviennent donc à une application comme émulseurs moyen et/ou haut foisonnement.

Gasila - Penila - 3. del: Specifikacija za penila za težko peno za površinsko uporabo pri tekočinah, netopnih v vodi

Ta dokument določa zahteve za kemične in fizične lastnosti ter minimalne zahteve za zmogljivost težkih pen, primernih za površinsko uporabo pri tekočinah, netopnih v vodi. Podane so tudi zahteve za označevanje.

General Information

Status
Withdrawn
Publication Date
04-Mar-2008
Withdrawal Date
13-Mar-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
14-Mar-2018

Relations

Buy Standard

Standard
EN 1568-3:2008
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquidsAgents extincteurs - Emulseurs -
- Partie 3 : Spécifications pour les émulseurs bas foisonnement destinés a une application a la surface des liquides n'ayant pas d'affinité pour l'eauFeuerlöschmittel - Schaummittel - Teil 3: Anforderungen an Schaummittel zur Erzeugung von Schwerschaum zum Aufgeben auf nicht-polare Flüssigkeiten13.220.10Gašenje požaraFire-fightingICS:SIST EN 1568-3:2008en,fr,deTa slovenski standard je istoveten z:EN 1568-3:200801-julij-2008SIST EN 1568-3:2008SLOVENSKI
STANDARDSIST EN 1568-3:20011DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1568-3March 2008ICS 13.220.10Supersedes EN 1568-3:2000
English VersionFire extinguishing media - Foam concentrates - Part 3:Specification for low expansion foam concentrates for surfaceapplication to water-immiscible liquidsAgents extincteurs - Emulseurs - Partie 3: Spécificationspour les émulseurs bas foisonnement destinés à uneapplication à la surface de liquides n'ayant pas d'affinitépour l'eauFeuerlöschmittel - Schaummittel - Teil 3: Anforderungen anSchaummittel zur Erzeugung von Schwerschaum zumAufgeben auf nicht-polare (mit Wasser nicht mischbare)FlüssigkeitenThis European Standard was approved by CEN on 5 January 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1568-3:2008: E

Preliminary sampling of foam concentrates.12 Annex C (normative)
Determination of percentage sediment.13 Annex D (normative)
Determination of Viscosity for pseudo-plastic foam concentrates.14 Annex E (normative)
Temperature conditioning of foam concentrates.16 Annex F (normative)
Determination of surface tension and spreading coefficient.19 Annex G (normative)
Determination of expansion and drainage time.20 Annex H (normative)
Determination of test fire performance.25 Annex I (informative)
Small scale fire test.30 Annex J (informative)
Description of a radiation measurement method.40 Annex K (informative)
A-Deviations.44 Bibliography.46

Part 1: Specifications for halon 1211 and halon 1301 (ISO 7201-1:1989) EN 27201-2, Fire protection — Fire extinguishing media — Halogenated hydrocarbons — Part 2: Code of practice for safe handling and transfer procedures (ISO 7201-2:1991) EN 615, Fire protection — Fire extinguishing media — Specification for powders (other than Class D powders)
This standard is Part 3 of EN 1568 which has the general title "Fire extinguishing media - Foam concentrates". The other parts are:  Part 1 - Specification for medium expansion foam concentrates for surface application to water-immiscible liquids  Part 2 - Specification for high expansion foam concentrates for surface application to water-immiscible liquids  Part 4 - Specification for low expansion foam concentrates for surface application to water-miscible liquids As fire fighting foams are chemical agents or chemical preparations EC Directives 1967/548/EEC, 1999/45/EEC, Regulation (EC) 1907/2006 (REACH) and 2006/60/EEC apply and should be taken into account. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

expansion value expansion ratio ratio of the volume of foam to the volume of the foam solution from which it was made 3.3 low expansion foam foam which has an expansion ratio less than 20 3.4 medium expansion foam foam which has an expansion ratio greater than or equal to 20 but less than 200 3.5 high expansion foam foam which has an expansion ratio greater than or equal to 200

tension within the interface between a liquid and air 3.16 interfacial tension tension within the interface between two immiscible liquids

5 Viscosity of the foam concentrate 5.1 Newtonian foam concentrates The viscosity of the foam concentrate at the lowest
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.