EN 13084-7:2012
(Main)Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
This European Standard deals with steel products for single wall steel chimneys and liners which are produced either in series or as single items. It is a product standard which specifies the performance requirements of cylindrical steel fabrications for use in single wall steel chimneys and steel liners for free-standing chimneys used to convey the flue gas to the outside atmosphere. It also specifies the requirements for insulation and cladding being part of the single wall steel chimney and liner. It provides for the evaluation of conformity of single wall steel chimneys and liners to this European Standard.
Freistehende Schornsteine — Teil 7: Produktfestlegungen für zylindrische Stahlbauteile zur Verwendung in einschaligen Stahlschornsteinen und Innenrohren aus Stahl
Diese Europäische Norm gilt für Produkte aus Stahl die für einschalige Stahlschornsteine und Innenrohre welche in Serie oder in Einzelfertigung hergestellt werden. Sie ist eine Produktnorm, die die Leistungsanforderungen für zylindrische Stahlbauteile zur Verwendung in einschaligen Stahlschornsteinen und Innenrohren aus Stahl für freistehende Schornsteine, die zur Ableitung von Abgasen an die Außenluft verwendet werden, festlegt. Sie legt auch die Anforderungen an die Wärmedämmung und die Verkleidung als Teil des einwandigen Stahlschornsteines und des Innenrohres fest und ermöglicht die Bewertung der Konformität des einwandigen Stahlschornsteines und des Innenrohrs mit dieser Europäischen Norm.
Cheminées autoportantes - Partie 7: Spécifications de produit applicables aux fabrications cylindriques en acier pour cheminées en acier à paroi simple et parois intérieures en acier
La présente Norme européenne traite des produits en acier pour les cheminées en acier à paroi simple et parois intérieures en acier qui sont produites en série ou individuellement. Il s'agit d'une norme de produit qui spécifie les performances relatives aux fabrications cylindriques en acier utilisées dans les cheminées en acier à paroi simple et les parois intérieures en acier destinées aux cheminées autoportantes dont la fonction principale est d'acheminer les fumées jusque dans l'atmosphère. Elle spécifie également les exigences relatives à l'isolation et au bardage équipant la cheminée en acier à paroi simple et la paroi intérieure. Elle permet l'évaluation de la conformité des cheminées à paroi simple et parois intérieures en acier à la présente Norme européenne.
Prostostoječi dimniki - Specifikacije proizvoda za cilindrične jeklene proizvode, ki se uporabljajo v enojnih zidnih jeklenih dimnikih in jeklenih ceveh
Ta evropski standard obravnava jeklene proizvode za enojne zidne jeklene dimnike in cevi, ki se proizvajajo v serijah ali posamezno. To je standard za proizvod, ki določa izvedbene zahteve za cilindrične jeklene proizvode, ki se uporabljajo v enojnih zidnih jeklenih dimnikih in jeklenih ceveh za prostostoječe dimnike za odvod izpušnih plinov v ozračje. Določa tudi zahteve za izolacijo in obloge enojnih zidnih jeklenih dimnikov in cevi. Omogoča vrednotenje skladnosti enojnih zidnih jeklenih dimnikov in cevi s tem evropskim standardom.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HKFreistehende Schornsteine - Produktfestlegungen für zylindrische Stahlbauteile zur Verwendung in einschaligen Stahlschornsteinen und Innenrohren aus StahlCheminées indépendantes - Spécifications des produit pour composants en acier pour l'utilisation dans des conduits simple paroi et des parois en acierFree-standing chimneys - Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners91.060.40Dimniki, jaški, kanaliChimneys, shafts, ductsICS:Ta slovenski standard je istoveten z:EN 13084-7:2012SIST EN 13084-7:2013en,fr,de01-marec-2013SIST EN 13084-7:2013SLOVENSKI
STANDARDSIST EN 13084-7:2006/AC:2009SIST EN 13084-7:20061DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13084-7
December 2012 ICS 91.060.40 Supersedes EN 13084-7:2005English Version
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
Cheminées autoportantes - Partie 7: Spécifications de produit applicables aux fabrications cylindriques en acier pour cheminées en acier à paroi simple et parois intérieures en acier
Freistehende Schornsteine - Teil 7: Produktfestlegungen für zylindrische Stahlbauteile zur Verwendung in einschaligen Stahlschornsteinen und Innenrohren aus StahlThis European Standard was approved by CEN on 27 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13084-7:2012: ESIST EN 13084-7:2013
Assessment of factory production control . 16A.1 General . 16A.2 Initial inspection. 16A.3 Continuous surveillance . 16A.4 Frequency of inspection . 17A.4.1 General . 17A.4.2 Surveillance intervals . 17A.4.3 Declaration of manufacturer . 17A.4.4 Measures in non-compliance . 17A.5 Reports . 17SIST EN 13084-7:2013
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 18Bibliography . 24 SIST EN 13084-7:2013
1 Scope This European Standard deals with steel products for single wall steel chimneys and liners which are produced either in series or as single items. It is a product standard which specifies the performance requirements of cylindrical steel fabrications for use in single wall steel chimneys and steel liners for free-standing chimneys used to convey the flue gas to the outside atmosphere. It also specifies the requirements for insulation and cladding being part of the single wall steel chimney and liner. It provides for the evaluation of conformity of single wall steel chimneys and liners to this European Standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 287-1, Qualification test of welders — Fusion welding — Part 1: Steels EN 1090-2, Execution of steel structures and aluminium structures — Part 2: Technical requirements for steel structures EN 1418, Welding personnel — Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials EN 1993-1-6, Eurocode 3 — Design of steel structures — Part 1-6: Strength and Stabi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.