EN 14420-2:2004
(Main)Hose fittings with clamp units - Part 2: Hose side parts of hose tail
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
This document specifies requirements for the hose tail of hose fittings according to EN 14420 1 for use with clamp units according to EN 14420 3.
Maximum working pressure 25 bar, maximum working temperature 65 °C.
Schlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige Stutzenteile
Raccords pour flexibles avec demi-coquille - Partie 2: Douilles pour flexibles
Le présent document prescrit les exigences applicables aux douilles pour flexibles conformément à
l�EN 14420-1 destinées à être utilisées avec des demi-coquilles conformément à l�EN 14420-3.
La pression de service maximale est de 25 bar et la température de service maximale est de 65 °C.
Cevni fitingi z objemkami - 2. del: Stranski cevni nastavki
General Information
- Status
- Withdrawn
- Publication Date
- 16-Nov-2004
- Withdrawal Date
- 09-Jul-2013
- Technical Committee
- CEN/TC 218 - Rubber and plastics hoses and hose assemblies
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Jul-2013
- Completion Date
- 10-Jul-2013
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 03-Jul-2010
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 14420-2:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hose fittings with clamp units - Part 2: Hose side parts of hose tail". This standard covers: This document specifies requirements for the hose tail of hose fittings according to EN 14420 1 for use with clamp units according to EN 14420 3. Maximum working pressure 25 bar, maximum working temperature 65 °C.
This document specifies requirements for the hose tail of hose fittings according to EN 14420 1 for use with clamp units according to EN 14420 3. Maximum working pressure 25 bar, maximum working temperature 65 °C.
EN 14420-2:2004 is classified under the following ICS (International Classification for Standards) categories: 23.040.70 - Hoses and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14420-2:2004 has the following relationships with other standards: It is inter standard links to EN 14420-2:2013, EN 1982:2024, EN 12420:2024, EN ISO 21920-2:2022, EN 10213:2007+A1:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14420-2:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 14420-2:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni fitingi z objemkami - 2. del: Stranski cevni nastavkiSchlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige StutzenteileRaccords pour flexibles avec demi-coquille - Partie 2: Douilles pour flexiblesHose fittings with clamp units - Part 2: Hose side parts of hose tail23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and jointsICS:Ta slovenski standard je istoveten z:EN 14420-2:2004SIST EN 14420-2:2005en01-marec-2005SIST EN 14420-2:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14420-2November 2004ICS 23.040.70English versionHose fittings with clamp units - Part 2: Hose side parts of hosetailRaccords pour flexibles avec demi-coquille - Partie 2:Douilles pour flexiblesSchlaucharmaturen mit Klemmfassungen - Teil 2:Schlauchseitige StutzenteileThis European Standard was approved by CEN on 30 September 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14420-2:2004: ESIST EN 14420-2:2005
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...