iTeh Standards logo
EURUSD
Your shopping cart is empty.
CEN

EN 13126-11:2008

(Main)

Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware

Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware

This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of top hung projecting reversible hardware for windows.
NOTE   This European Standard is applicable to top hung projecting reversible hardware whether fitted with integral restrictors or not.

Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 11: Umkehrbeschläge für auskragende Schwing-Klappflügelfenster

Dieser Teil von EN 13126 legt die Anforderungen und Prüfverfahren für die Dauerfunktionstüchtigkeit, Festigkeit, Schutzwirkung und Funktionsweise von Umkehrbeschlägen für auskragende Schwing-Klapp-flügelfenster fest.
ANMERKUNG   Diese Europäische Norm gilt für Umkehrbeschläge für auskragende Schwing-Klappflügelfenster, die mit eingebauten Vorrichtungen zur Begrenzung des Öffnungswinkels versehen sein können, aber nicht müssen.

Quincaillerie pour le bâtiment - Exigences et méthodes d'essai des ferrures de fenêtres et portes-fenêtres - Partie 11: Ferrures pour ouvrants à l’italienne réversibles à axe horizontal supérieur

La présente partie de l’EN 13126 spécifie les exigences et les méthodes d’essai relatives à l’endurance, à la résistance, à la sécurité des biens et au fonctionnement des ferrures pour ouvrants à l’italienne réversibles à axe horizontal supérieur pour fenêtres.
NOTE   La présente Norme européenne est applicable aux ferrures pour ouvrants à l’italienne réversibles à axe horizontal supérieur, qu’elles soient équipées ou non de limitateur d’ouverture intégré.

Stavbno okovje - Zahteve in preskusne metode za okna in zastekljena vrata - 11. del: Obrnjeno okovje za izbočena okna s sklopnimi krili

General Information

Status
Withdrawn
Publication Date
11-Nov-2008
Withdrawal Date
23-Dec-2025
ICS
91.190 - Building accessories
Technical Committee
CEN/TC 33 - Doors, windows, shutters and building hardware
Drafting Committee
CEN/TC 33 - Doors, windows, shutters and building hardware
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
10-Mar-2019
Completion Date
24-Dec-2025
Ref Project
SIST EN 13126-11:2009 - Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware

Relations

Replaces
CEN/TS 13126-11:2004 - Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 11: Top hung projecting reversible hardware
Effective Date
22-Dec-2008
Replaced By
EN 13126-11:2025 - Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 11: Top hung projecting reversible hardware
Effective Date
18-Oct-2023
EN 13126-11:2009EN 13126-11:2009
PreviousNext
Standard
EN 13126-11:2009
English language
12 pages
Preview
Preview
e-Library read for
1 day

Frequently Asked Questions

EN 13126-11:2008 is a standard published by the European Committee for Standardization (CEN). Its full title is "Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware". This standard covers: This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of top hung projecting reversible hardware for windows. NOTE This European Standard is applicable to top hung projecting reversible hardware whether fitted with integral restrictors or not.

This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of top hung projecting reversible hardware for windows. NOTE This European Standard is applicable to top hung projecting reversible hardware whether fitted with integral restrictors or not.

EN 13126-11:2008 is classified under the following ICS (International Classification for Standards) categories: 91.190 - Building accessories. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 13126-11:2008 has the following relationships with other standards: It is inter standard links to CEN/TS 13126-11:2004, EN 13126-11:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase EN 13126-11:2008 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baubeschläge - Anforderungen und Prüfverfahren für Fenster und Fenstertüren - Teil 11: Umkehrbeschläge für auskragende Schwing-KlappflügelfensterQuincaillerie pour le bâtiment - Exigences et méthodes d'essai des ferrures de fenêtres et portes-fenêtres - Partie 11: Ferrures pour ouvrants à l’italienne réversibles à axe horizontal supérieurBuilding hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware91.190Stavbna opremaBuilding accessoriesICS:Ta slovenski standard je istoveten z:EN 13126-11:2008SIST EN 13126-11:2009en,fr,de01-marec-2009SIST EN 13126-11:2009SLOVENSKI
STANDARDSIST-TS CEN/TS 13126-11:20051DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13126-11November 2008ICS 91.190Supersedes CEN/TS 13126-11:2004
English VersionBuilding hardware - Requirements and test methods for windowsand doors height windows - Part 11: Top hung projectingreversible hardwareQuincaillerie pour le bâtiment - Exigences et méthodesd'essai des ferrures de fenêtres et portes-fenêtres - Partie11: Ferrures pour ouvrants à l'italienne réversibles à axehorizontal supérieurBaubeschläge - Beschläge für Fenster und Fenstertüren -Anforderungen und Prüfverfahren - Teil 11:Umkehrbeschläge für auskragende Schwing-KlappflügelfensterThis European Standard was approved by CEN on 5 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13126-11:2008: ESIST EN 13126-11:2009

Test method diagrams.11 Annex B (normative)
Flow chart of test procedure.12
1) To be revised, for the time being CEN/TS. SIST EN 13126-11:2009

EN 12519:2004 and the following apply. NOTE The following terms and definitions apply to windows made of wood, PVC-u, aluminium or steel and their appropriate material com
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

CEN
EN 13126-10:2025(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 10: Arm-balancing systems
kSIST FprEN 13126-10:2025

This document specifies requirements and test methods for durability, strength, security and function for arm-balancing systems for windows and door height windows - see Annex C.

  • Draft
    14 pages
    English language
    e-Library read for
    1 day
CEN
EN 13126-12:2025(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 12: Side hung projecting reversible hardware
kSIST FprEN 13126-12:2025

This document specifies requirements and test methods for durability, strength, security and function for side hung projecting reversible hardware for windows and door height windows.
NOTE   This document is applicable to side hung projecting reversible hardware whether fitted with integral restrictors or not. Where any restrictor is used it is intended to be tested in accordance with EN 13126-5.

  • Draft
    16 pages
    English language
    e-Library read for
    1 day
CEN
EN 13126-11:2025(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 11: Top hung projecting reversible hardware
kSIST FprEN 13126-11:2025

This document specifies requirements and test methods for durability, strength, security and function for top hung projecting hardware for windows and door height windows.
This document is applicable to top hung projecting reversible hardware whether fitted with integral restrictors or not. Where any restrictor is used it is intended to be tested in accordance with EN 13126-5.

  • Draft
    15 pages
    English language
    e-Library read for
    1 day
CEN
EN 13126-9:2025(Main)
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 9: Hardware for horizontal and vertical pivot windows
SIST EN 13126-9:2025

This document specifies the requirements and test methods for durability and strength of hardware for vertical and horizontal pivot windows and door height windows (including pivot hinges and central locking systems).
If the hardware manufacturer would like to classify an integrated restrictor function, the pivot hinges can be tested in accordance with EN 13126-5.
This document does not apply to manoeuvring devices which are covered in EN 13126-2, EN 13126-3, and EN 13126-14.

  • Standard
    25 pages
    English language
    e-Library read for
    1 day
CEN
EN 12209:2024(Main)
Building hardware - Mechanically operated locks and locking plates - Characteristics and test methods
SIST EN 12209:2025

This document specifies product characteristics and test methods of mechanically operated locks and their locking plates.
This document covers mechanically operated locks and their locking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.
This document does not cover assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies.
This document is not applicable to mechanically/electromechanically cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks.
This document does not specify mechanically operated multipoint locks and their locking plates which are specified by EN 15685.

  • Standard
    78 pages
    English language
    e-Library read for
    1 day
CEN
EN 15685:2024(Main)
Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates - Characteristics and test methods
SIST EN 15685:2025

This document specifies product characteristics and test methods of mechanically operated multipoint locks and their locking plates.
This document covers multipoint locks their locking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.
This document does not cover assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies.
This document is not applicable to mechanically/electromechanically cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks.
This document does not specify mechanically operated locks or their locking plates which are specified by EN 12209.

  • Standard
    93 pages
    English language
    e-Library read for
    1 day
CEN
EN 16867:2020+A2:2024(Main)
Building hardware - Mechatronic door furniture - Requirements and test methods
SIST EN 16867:2020+A2:2024

1.1   General
This document applies to Mechatronic door furniture (MDF) fitted on the door set which gives the possibility to control the locking and/or release part through an electronic authorization means. This can be operable by credentials (i.e. card, code, biometric).
The MDF according to this document is combined with locks according to EN 12209, EN 14846, prEN 15685 or may be a part of an emergency exit device according to EN 179, EN 1125 or EN 13637.
The MDF may be standalone or linkable to an external control system.
The document would allow classifying the MDF upon several characteristics such as category of use, durability, environmental, security, and type of operating device.
The suitability of the MDF for use on fire or smoke-door assemblies is determined by fire resistance tests conducted in addition to the performance testing specified by this document.
1.2   Exclusions
This document does not cover:
-   mechatronic cylinders according to EN 15684;
-   electromechanical operated locks and striking plates according to EN 14846.

  • Standard
    66 pages
    English language
    e-Library read for
    1 day
CEN
EN 16035:2023(Main)
Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows
SIST EN 16035:2024

This document summarizes relevant results and classifications from tests of the fire and smoke resistance performance of building hardware in the format of a hardware performance sheet (HPS). This document provides guidance and requirements on the minimum data required as a basis for the preparation of EXAP reports for the interchangeability of building hardware on fire-retardant and/or smoke-tight doors and openable windows.
This document identifies the performance characteristics and the requirements for building hardware which can be found in the appropriate product standards.

  • Standard
    14 pages
    English language
    e-Library read for
    1 day
CEN
EN 13126-3:2023(Main)
Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt and Turn, Tilt-First and Turn-Only hardware
SIST EN 13126-3:2023

This part of the EN 13126 series specifies the requirements and test procedures for durability, strength, security and functionality of handles.
This document is applicable to Tilt and Turn, Tilt-First and Turn-Only hardware for use on windows and door-height windows.
Handles can also be used on other opening types, e.g. on In-line Sliding, Tilt and Slide, Sliding Folding, horizontal and vertical-pivoting windows.
This document is not applicable to:
a)   operation devices, door handles for door latches and door locks (for this, refer to EN 1906);
b)   handles with handle length > 170 mm (refer to Figure B.1).

  • Standard
    28 pages
    English language
    e-Library read for
    1 day
CEN
EN 17610:2022(Main)
Building hardware - Environmental product declarations - Product category rules complementary to EN 15804 for building hardware
SIST EN 17610:2022

This document provides product category rules (PCR) for Type III environmental declarations for:
- Building hardware products for opening and closing doors, gates, windows and shutters:
-- Lever handles and knob furniture (EN 1906);
-- Single-axis hinges (EN 1935);
-- Hardware for windows and door height windows (EN 13126 (all parts));
-- Fittings for shutters (e.g. EN 14648);
-- Controlled door closing devices, electrically powered hold-open devices for swing doors and door coordinator devices (EN 1154, EN 1155, EN 1158);
-- Hardware for sliding doors, folding doors and roll fronts (EN 1527, EN 15706);
-- Glass door gear;
- Building hardware products for locking and unlocking doors, gates, windows and shutters:
-- Mechanically operated locks and locking plates, multipoint locks, latches and locking plates (EN 12209, EN 15685 );
-- Cylinders for locks (EN 1303);
-- Padlocks and padlock fittings (EN 12320);
-- Mechanically operated push-button locksets (BS 8607);
-- Emergency exit devices operated by a lever handle or push pad, for use on escape routes and panic exit devices operated by a horizontal bar, for use on escape routes (EN 179, EN 1125);
- Electromechanical building hardware products:
-- Mechatronic cylinders (EN 15684);
-- Mechatronic padlocks (EN 16864);
-- Mechatronic door furniture (EN 16867);
-- Electromechanically operated locks and striking plates (EN 14846);
-- Electrically controlled exit systems for use on escape routes (EN 13637).
This document complements the core rules for the product category of construction products as defined in the European standard EN 15804:2012+A2:2019.
NOTE The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
- defines the parameters to be declared and the way in which they are collated and reported;
- describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
- defines rules for the development of scenarios;
- includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied;
- includes the rules for reporting the predetermined, environmental and health information that is not covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction service(s), as relevant;
- defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.

  • Standard
    26 pages
    English language
    e-Library read for
    1 day