Footwear - Test methods for uppers - Tensile strength and elongation

This standard specifies a test method for determining the force required to break a test specimen from uppers irrespective of the material, in order to asses the suitability for the end use.

Schuhe - Prüfverfahren für Obermaterialien - Bruchfestigkeit und Bruchdehnung

Diese Europäische Norm legt ein werkstoffunabhängiges Prüfverfahren zur Bestimmung der Kraft fest, die erforderlich ist, um ein vom Obermaterial genommenes Prüfstück zu zerreißen, um die Gebrauchseigenschaften im fertigen Zustand zu bestimmen.

Chaussures - Méthodes d'essai des tiges - Résistance à la rupture et allongement

Le présent projet de norme spécifie une méthode d'essai permettant de déterminer la force nécessaire pour provoquer la rupture d'une éprouvette prélevée sur des tiges, quel que soit le materiau qui les compose, afin d'évaluer si ces tiges conviennent à l'utilisation finale.

Footwear - Test methods for uppers - Tensile strength and elongation

General Information

Status
Withdrawn
Publication Date
11-Dec-2001
Withdrawal Date
20-Jan-2026
ICS
61.060 - Footwear
Technical Committee
CEN/TC 309 - Footwear
Drafting Committee
CEN/TC 309/WG 1 - Minimum performance requirements and test methods for components for footwear
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
10-Oct-2018
Completion Date
21-Jan-2026
Ref Project
SIST EN 13522:2004 - Footwear - Test methods for uppers - Tensile strength and elongation

Relations

Replaced By
EN ISO 17706:2018 - Footwear - Test methods for uppers - Tensile strength and elongation (ISO 17706:2003)
Effective Date
16-May-2018
Refers
EN ISO 17709:2018 - Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces (ISO 17709:2004)
Effective Date
28-Jan-2026
Refers
EN ISO 2418:2023 - Leather - Chemical, physical, mechanical and fastness tests - Position and preparation of specimens for testing (ISO 2418:2023)
Effective Date
28-Jan-2026
Referred By
EN 6046:2020 - Aerospace series - Bearing, spherical, plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series
Effective Date
28-Jan-2026
Referred By
EN 4613:2009 - Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series
Effective Date
28-Jan-2026
Referred By
EN 4854-1:2019 - Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, narrow series - Part 1: Dimensions and loads for narrow series
Effective Date
28-Jan-2026
Referred By
EN 2588:2024 - Aerospace series - Bearing, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads
Effective Date
28-Jan-2026
Referred By
EN 4033:2007 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads
Effective Date
28-Jan-2026
Referred By
EN 4854-2:2019 - Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, wide series - Part 2: Dimensions and loads
Effective Date
28-Jan-2026
Referred By
EN 4265:2013 - Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series
Effective Date
28-Jan-2026
Referred By
EN 4035:2006 - Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads
Effective Date
28-Jan-2026
Referred By
EN 6097:2019 - Aerospace series - Bearing, spherical plain, metal to metal, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series
Effective Date
28-Jan-2026
Referred By
EN 4266:2013 - Aerospace series - Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated - Wide series - Dimensions and loads - Inch series
Effective Date
28-Jan-2026
Referred By
EN 4614:2009 - Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series
Effective Date
28-Jan-2026
Referred By
EN 3061:2007 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing - Dimensions and loads
Effective Date
28-Jan-2026

Frequently Asked Questions

EN 13522:2001 is a standard published by the European Committee for Standardization (CEN). Its full title is "Footwear - Test methods for uppers - Tensile strength and elongation". This standard covers: This standard specifies a test method for determining the force required to break a test specimen from uppers irrespective of the material, in order to asses the suitability for the end use.

This standard specifies a test method for determining the force required to break a test specimen from uppers irrespective of the material, in order to asses the suitability for the end use.

EN 13522:2001 is classified under the following ICS (International Classification for Standards) categories: 61.060 - Footwear. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 13522:2001 has the following relationships with other standards: It is inter standard links to EN ISO 17706:2018, EN ISO 17709:2018, EN ISO 2418:2023, EN 6046:2020, EN 4613:2009, EN 4854-1:2019, EN 2588:2024, EN 4033:2007, EN 4854-2:2019, EN 4265:2013, EN 4035:2006, EN 6097:2019, EN 4266:2013, EN 4614:2009, EN 3061:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 13522:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Footwear - Test methods for uppers - Tensile strength and elongationSchuhe - Prüfverfahren für Obermaterialien - Bruchfestigkeit und BruchdehnungChaussures - Méthodes d'essai des tiges - Résistance a la rupture et allongementFootwear - Test methods for uppers - Tensile strength and elongation61.060ObuvalaFootwearICS:Ta slovenski standard je istoveten z:EN 13522:2001SIST EN 13522:2004en01-januar-2004SIST EN 13522:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13522December 2001ICS 61.060English versionFootwear - Test methods for uppers - Tensile strength andelongationChaussures - Méthodes d'essai des tiges - Résistance à larupture et allongementSchuhe - Prüfverfahren für Obermaterialien - Zugfestigkeitund BruchdehnungThis European Standard was approved by CEN on 16 November 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13522:2001 ESIST EN 13522:2004
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...