Precast concrete products - Special roof elements

This document identifies the requirements, the basic performance criteria and the evaluation of conformity for special precast roof elements made of reinforced or prestressed normal weight concrete, used for the construction of buildings, with or without separating function with respect to fire resistance.
NOTE   The title of special roof elements refers to thin-walled structural elements with deformable transverse profile, such as folded plates, or shell elements, the intended use being specific for roofings with their typical loads. This type of elements combines the overall flexural behaviour along the main span with a complex distribution of in-plane forces and local moments.
Other types of elements can be used in roofing, such as ribbed units, floor slabs, ... . For these elements reference shall be made to their respective product standards.
!This document identifies also the requirements, the basic performance criteria and the evaluation of conformity of complementary elements made of reinforced or prestressed normal weight concrete, possibly used in combination with the main roof elements, such as load bearing shuttering plates and shells, for which reference shall be made to Annex F."Secondary structural components, possibly used in combination with the main roof elements, such as load bearing shuttering plates and shells, roof light frames, ..., shall refer to their respective product standard or technical approval.
This document covers terminology, performance criteria, tolerances, relevant physical properties, test methods, and aspects of transport and erection.
This document does not deal with seismic behaviour.
This document does not cover load bearing capacity determined by testing.

Betonfertigteile - Besondere Fertigteile für Dächer

Dieses Dokument legt die Anforderungen, die grundlegenden Leistungskriterien und die Bewertung der Konformität für besondere Fertigteile für Dächer aus vorgespanntem und nicht vorgespanntem Normalbeton fest, die im Hochbau mit oder ohne Raum abschließende Funktion hinsichtlich des Feuerwiderstands eingesetzt werden.
ANMERKUNG Der Titel "besondere Fertigteile für Dächer" bezieht sich auf dünnwandige tragende Bauteile mit verformbarem Querschnitt, wie Faltwerke oder Schalen, wobei die vorgesehene Verwendung für Überdachungen mit deren typischen Belastungen charakteristisch ist. Diese Art von Fertigteilen vereint das Gesamtbiegeverhalten längs der Hauptstützweite mit einer in gegenseitigem Zusammenhang stehenden Verteilung von Scheibenkräften und örtlichen Momenten.
Für Dächer können auch andere Fertigteilarten verwendet werden, wie z. B. Deckenplatten mit Stegen, Decken-platten, usw. Für diese Fertigteile sind die entsprechenden Produktnormen heranzuziehen.
!Ferner legt dieses Dokument die Anforderungen, die grundlegenden Leistungskriterien und die Bewertung der Konformität von Ergänzungsbauteilen aus vorgespanntem und nicht vorgespanntem Normalbeton fest, die möglicherweise in Verbindung mit den Hauptfertigteilen für Dächer verwendet werden, wie z. B. tragende Schaltafeln und Schalhäute. Ergänzungsbauteile werden in Anhang F behandelt."
In diesem Dokument werden Begriffe, Leistungskriterien, Toleranzen, die maßgebenden physikalischen Eigenschaften, Prüfverfahren und Aspekte von Transport und Montage festgelegt.
Dieses Dokument gilt nicht für das Verhalten bei Erdbeben.
Die durch Prüfung bestimmte Tragfähigkeit ist nicht Gegenstand dieses Dokumentes.

Produits préfabriqués en béton - Éléments spéciaux de toiture

La présente norme spécifie les prescriptions, les critères relatifs aux performances de base et l’évaluation de laconformité pour les éléments spéciaux préfabriqués de toiture en béton de granulats courants armé ou précontraint,utilisés pour la construction de bâtiments, avec ou sans fonction de séparation liée à la résistance au feu.NOTELe titre «Éléments spéciaux de toiture» fait référence à des éléments structurels à parois minces avec des profilstransversaux déformables, tels que des plaques plissées ou des éléments en coque, l’application prévue étant spécifique auxtoitures avec leurs charges type. Ce type d’éléments associe le comportement global en flexion le long de la portée principaleavec une distribution complexe de forces coplanaires et de moments localisés.!Le présent document spécifie également les prescriptions, les critères relatifs aux performances de base etl’évaluation de la conformité pour les éléments complémentaires préfabriqués en béton de granulats courants arméou précontraint, éventuellement utilisés en association avec les éléments de toiture principaux, tels que des plaqueset coques de coffrage portantes, pour lesquels il faut se référer à l’Annexe F."Les composants structurels secondaires éventuellement utilisés en combinaison avec les éléments de toitureprincipaux, tels que des plaques et coques de coffrage portantes, structures pour éclairage zénithal, etc. doivent faireréférence aux normes de produits correspondantes ou à leur avis technique.La présente norme couvre la terminologie, les critères de performance, les tolérances, les propriétés physiquespertinentes, les méthodes d’essai et les aspects relatifs au transport et à la mise en œuvre.La présente norme ne traite pas du comportement sismique.La présente norme ne couvre pas la capacité portante déterminée par essais.

Montažni betonski izdelki - Specialni strešni elementi

General Information

Status
Published
Publication Date
28-Jul-2009
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
18-Jun-2010
Completion Date
18-Jun-2010

Relations

Buy Standard

Standard
EN 13693:2004+A1:2009
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Montažni betonski izdelki - Specialni strešni elementiBetonfertigteile - Besondere Fertigteile für DächerProduits préfabriqués en béton - Éléments spéciaux de toiturePrecast concrete products - Special roof elements91.100.30Beton in betonski izdelkiConcrete and concrete products91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 13693:2004+A1:2009SIST EN 13693:2004+A1:2009en,fr,de01-november-2009SIST EN 13693:2004+A1:2009SLOVENSKI
STANDARDSIST EN 13693:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13693:2004+A1
July 2009 ICS 91.100.30 Supersedes EN 13693:2004English Version
Precast concrete products - Special roof elements
Produits préfabriqués en béton - Éléments spéciaux de couverture
Betonfertigteile - Besondere Fertigteile für Dächer This European Standard was approved by CEN on 24 June 2004 and includes Amendment 1 approved by CEN on 19 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13693:2004+A1:2009: ESIST EN 13693:2004+A1:2009

2 Contents
The numbering of clauses is strictly related to EN 13369, Common rules for precast concrete products, at least for the first three digits. When a clause of EN 13369 is not relevant or included in a more general reference of this standard, its number is omitted and this may result in a gap on numbering
page Foreword . 3 Introduction . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Requirements . 6 4.1 Material requirements . 6 4.2 Production requirements . 7 4.2.1 Concrete production . 7 4.2.2 Hardened concrete . 7 4.2.3 Structural reinforcement . 7 4.3 Finished product requirements . 7 4.3.1 Geometrical properties . 7 4.3.2 Surface characteristics . 8 4.3.3 Mechanical resistance . 9 4.3.4 Resistance and reaction to fire . 9 4.3.5 Acoustic properties . 9 4.3.6 Thermal properties . 9 4.3.7 Durability . 9 4.3.8 Other requirements. 10 5 Test methods . 10 5.1 Tests on concrete . 10 5.2 Measuring of dimensions . 10 5.3 Weight of the elements . 11 5.4 Load test of elements . 11 6 Evaluation of conformity . 11 6.1 General . 11 6.2 Type testing . 11 6.3 Factory production control . 11 7 Marking and labelling . 12 8 Technical documentation . 12 Annex A (informative)
Terminology of plate elements . 13 Annex B (informative)
Types of products . 15 Annex C (informative)
Mechanical behaviour . 23 Annex D (informative)
Serviceability and resistance verifications . 28 Annex E (informative)
Flexural test of elements . 32 Annex F (normative)
!!!!Complementary elements"""" . 39 Annex Y (Informative)
Choice of CE marking method . 43 Annex ZA (informative)
!!!!Relationship between this European Standard and the essential requirements of EU Directive 89/106/EEC, EU Construction Products Directive"""" . 44 Bibliography . 58
4  !EN 14843, Precast concrete products – Stairs"  !EN 14844, Precast concrete products - Box culverts"  !EN 14991, Precast concrete products - Foundation elements"  !EN 14992, Precast concrete products - Wall elements"  !EN 15037, Precast concrete products - Beams for beam-and-block floor systems" This standard defines in Annex ZA the application methods of CE marking to products designed using the relevant EN Eurocodes (EN 1992-1-1 and EN 1992-1-2). Where, in default of applicability conditions of EN Eurocodes to the works of destination, design Provisions other than EN Eurocodes are used for mechanical strength and/or fire resistance, the conditions to affix CE marking to the product are described in ZA.3.4. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 13693:2004+A1:2009

6 1 Scope This document identifies the requirements, the basic performance criteria and the evaluation of conformity for special precast roof elements made of reinforced or prestressed normal weight concrete, used for the construction of buildings, with or without separating function with respect to fire resistance. NOTE The title of special roof elements refers to thin-walled structural elements with deformable transverse profile, such as folded plates, or shell elements, the intended use being specific for roofings with their typical loads. This type of elements combines the overall flexural behaviour along the main span with a complex distribution of in-plane forces and local moments. Other types of elements can be used in roofing, such as ribbed units, floor slabs, . . For these elements reference shall be made to their respective product standards. !This document identifies also the requirements, the basic performance criteria and the evaluation of conformity of complementary elements made of reinforced or prestressed normal weight concrete, possibly used in combination with the main roof elements, such as load bearing shutterin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.