EN 1858:2017
(Main)Chimneys - Components - Concrete flue blocks
Chimneys - Components - Concrete flue blocks
This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in Clause 3 for use in chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation.
This standard does not cover products designated wet (W) in conjunction with corrosion class 3.
The standard also specifies a type of flue block to dimensionally coordinate with masonry unit coursing height, referred to as a type B flue block.
This standard also applies to storey-height and flue blocks reinforced for handling.
NOTE Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated.
Abgasanlagen - Bauteile - Betonformblöcke
Dieses Dokument legt die Anforderungen an die Werkstoffe, die Abmessungen sowie die Leistungs-anforderungen an Formblöcke aus Fertigbeton, wie in Abschnitt 3 festgelegt, zur Verwendung in Abgasanlagen fest. Die Formblöcke können einschalig oder mehrschalig sein. Diese Norm gilt nicht für Formblöcke, die hinterlüftet sind.
Diese Norm gilt nicht für Produkte, die mit feucht (W) gekennzeichnet sind in Verbindung mit Korrosions-beständigkeitsklasse 3.
Diese Norm beschreibt außerdem einen Typ von Formblöcken, der mit der Schichthöhe des Mauerwerkes maßlich abgestimmt ist und als Typ B (Verbundblock) bezeichnet wird.
Diese Europäische Norm gilt außerdem für geschosshohe und mit einer Transportbewehrung versehene Formblöcke.
ANMERKUNG Sämtliche Verweisungen auf den Begriff "Formblöcke" beziehen sich sowohl auf Formblöcke als auch auf ihre Formstücke, außer wenn es anders angegeben ist.
Conduits de fumée - Composants - Conduits de fumée simple et multiparois en béton
Le présent document spécifie les exigences relatives aux matériaux, aux dimensions et aux performances applicables aux conduits préfabriqués en béton, tels que définis à l’Article 3, et constitutifs de conduits de fumée. Les conduits peuvent être à simple paroi ou multiparois. La norme ne s'applique pas aux conduits ventilés par l’extérieur.
La présente norme ne couvre pas les produits désignés « humides » (W) associés à la classe de corrosion 3.
La norme spécifie également un type de conduit de dimensions coordonnées à la hauteur d'assise des blocs de maçonnerie, et désigné par conduit de type B (conduits appareillés).
La présente Norme européenne couvre également les conduits hauteur d'étage et les boisseaux armés pour la manutention.
NOTE Toute référence au terme « conduit de fumée » implique l’ensemble des conduits et leurs accessoires, sauf indication contraire.
Dimovodne naprave - Sestavni deli - Betonski bloki za dimovodne naprave
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dimniki - Sestavni deli - Betonski bloki za dimnikeAbgasanlagen - Bauteile - BetonformblöckeConduits de fumée
- Composants - Conduits de fumée simple et multiparois en bétonChimneys - Components - Concrete flue blocks91.100.30Beton in betonski izdelkiConcrete and concrete products91.060.40Dimniki, jaški, kanaliChimneys, shafts, ductsICS:Ta slovenski standard je istoveten z:FprEN 1858kSIST FprEN 1858:2015en,fr,de01-junij-2015kSIST FprEN 1858:2015SLOVENSKI
STANDARD
kSIST FprEN 1858:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1858
April 2015 ICS 91.060.40 Will supersede EN 1858:2008+A1:2011English Version
Chimneys - Components - Concrete flue blocks
Conduits de fumée
- Composants - Conduits de fumée simple et multiparois en béton
Abgasanlagen - Bauteile - Betonformblöcke This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 166.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1858:2015 EkSIST FprEN 1858:2015
FprEN 1858:2015 (E) 2 Contents Page Foreword .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .6 4 Materials .8 4.1 General .8 4.2 Reaction to fire .8 5 Reinforcement for handling .9 6 Surface treatment .9 7 Form, dimensions and tolerances .9 7.1 Form .9 7.2 Type B flue blocks .9 7.3 Tolerances . 10 7.4 Straightness . 11 7.5 Squareness of ends .
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dimovodne naprave - Sestavni deli - Betonski bloki za dimovodne napraveAbgasanlagen - Bauteile - BetonformblöckeConduits de fumée
- Composants - Conduits de fumée simple et multiparois en bétonChimneys - Components - Concrete flue blocks91.100.30Beton in betonski izdelkiConcrete and concrete products91.060.40Dimniki, jaški, kanaliChimneys, shafts, ductsICS:Ta slovenski standard je istoveten z:FprEN 1858kSIST FprEN 1858:2016en,fr,de01-september-2016kSIST FprEN 1858:2016SLOVENSKI
STANDARD
kSIST FprEN 1858:2016
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1858
June
t r s x ICS
{ sä r x rä v râ
{ sä s r rä u r Will supersede EN
s z w zã t r r z ªA sã t r s sEnglish Version
Chimneys æ Components æ Concrete flue blocks Conduits de fumée
æ Composants æ Conduits de fumée simple et multiparois en béton
Abgasanlagen æ Bauteile æ Betonformblöcke This draft European Standard is submitted to CEN members for second unique acceptance procedureä It has been drawn up by
If this draft becomes a European Standardá CEN members are bounwhich stipulate the conditions for giving this European Standard the status of a national standard without any alterationä
This draft European Standard was established by CEN in three ofer language made by translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
Recipients of this draft are invited to submitá with their commentsá notification of any relevant patent rights of which they are aware and to provide supporting documentationä
Warning ã This document is not a European Standardä It is distributed for review and commentsä It is subject to change without notice and shall not be referred to as a European Standardä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä FprEN
s z w zã t r s x EkSIST FprEN 1858:2016
FprEN 1858:2016 (E) 2 Contents Page European foreword . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Materials . 8 4.1 General . 8 4.2 Reaction to fire . 9 5 Reinforcement for handling . 9 6 Surface treatment . 9 7 Form, dimensions and tolerances . 9 7.1 Form . 9 7.2 Type B flue blocks . 9 7.3 Tolerances . 10 7.4 Straightness .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.