EN 1119:1996
(Main)Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints
Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints
This standard specifies test methods for flexible and reduced articulation spigot and socket joints, including double-socket joints, with elastomeric sealing elements for above ground and buried glass-reinforced thermosetting plastics (GRP) pipeline applications. It covers methods of test for the leaktightness and resistance to damage of the joint only, when subject to specified combinations of longitudinal extension (draw), angular movement (angular deflection), vertical compression (misalignment) and internal pressure.
Kunststoff-Rohrleitungssysteme - Verbindungen für Rohre und Formstücke aus glasfaserverstärkten duroplastischen Kunststoffen (GFK) - Prüfverfahren zur Dichtheit und Widerstandssfähigkeit gegen Beschädigung von flexiblen und eigeschränkt beweglichen Verbindungen
Diese Norm legt Prüfverfahren für flexible und eingeschränkt bewegliche Muffen- und Spitzenden-Verbindungen einschließlich Doppelmuffen mit elastomeren Dichtelementen fest, die in ober- und unterirdischen Rohrleitungen aus glasfaserverstärkten duroplastischen Kunststoffen (GFK) zur Anwendung kommen. Sie umfaßt nur Prüfverfahren zur Dichtigkeit und zur Widerstandsfähigkeit gegen Beschädigung für die Verbindung, wenn diese den festgelegten Kombinationen von Längsverschiebung (Auszug), Winkelbewegung (Abwinkelung), vertikaler Belastung (Versatz) und Innendruck ausgesetzt wird.
Systèmes de canalisations plastiques - Assemblages pour tubes et raccords en plastique thermodurcissable renforcé de verre (PRV) - Méthodes d'essai d'étanchéité et de résistance à l'endommagement des assemblages flexibles et à articulation réduite
Cette norme spécifie les méthodes d'essai pour les assemblages mâle-femelle flexibles et à articulation réduite ainsi que ceux à double emboîture avec bagues d'étanchéité en élastomère, pour des canalisations en plastique renforcé de verre (PRV) souterraines ou en surface. Elle couvre les méthodes d'essai d'étanchéité et de résistance à l'endommagement de l'assemblage uniquement, lorsqu'il est soumis à des combinaisons spécifiques de mise en tension longitudinale (retrait), de mouvement angulaire (déviation angulaire), de compression verticale (désalignement) et de pression interne.
Cevni sistemi iz polimernih materialov - Spoji za cevi in fitinge iz duromernih materialov, ojačenih s steklenimi vlakni (GRP) - Metode za preskus tesnjenja in odpornosti proti poškodbam gibljivih in omejeno gibljivih spojev
General Information
- Status
- Withdrawn
- Publication Date
- 19-Mar-1996
- Withdrawal Date
- 17-Mar-2009
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Drafting Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 18-Mar-2009
- Completion Date
- 18-Mar-2009
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 23-Mar-2009
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 1119:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints". This standard covers: This standard specifies test methods for flexible and reduced articulation spigot and socket joints, including double-socket joints, with elastomeric sealing elements for above ground and buried glass-reinforced thermosetting plastics (GRP) pipeline applications. It covers methods of test for the leaktightness and resistance to damage of the joint only, when subject to specified combinations of longitudinal extension (draw), angular movement (angular deflection), vertical compression (misalignment) and internal pressure.
This standard specifies test methods for flexible and reduced articulation spigot and socket joints, including double-socket joints, with elastomeric sealing elements for above ground and buried glass-reinforced thermosetting plastics (GRP) pipeline applications. It covers methods of test for the leaktightness and resistance to damage of the joint only, when subject to specified combinations of longitudinal extension (draw), angular movement (angular deflection), vertical compression (misalignment) and internal pressure.
EN 1119:1996 is classified under the following ICS (International Classification for Standards) categories: 23.040.60 - Flanges, couplings and joints. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1119:1996 has the following relationships with other standards: It is inter standard links to EN 1119:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1119:1996 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 93/38/EEC; Standardization Mandates: M/BC/CEN/88/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1119:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoff-Rohrleitungssysteme - Verbindungen für Rohre und Formstücke aus glasfaserverstärkten duroplastischen Kunststoffen (GFK) - Prüfverfahren zur Dichtheit und Widerstandssfähigkeit gegen Beschädigung von flexiblen und eigeschränkt beweglichen VerbindungenSystemes de canalisations plastiques - Assemblages pour tubes et raccords en plastique thermodurcissable renforcé de verre (PRV) - Méthodes d'essai d'étanchéité et de résistance a l'endommagement des assemblages flexibles et a articulation réduitePlastics piping systems - Joi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...