EN ISO 276:2010
(Main)Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2002)
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2002)
ISO 276:2002 specifies the requirements and the corresponding test methods for five types of linseed stand oil suitable for paints and varnishes.
Bindemittel für Beschichtungsstoffe - Leinöl-Standöl - Anforderungen und Prüfverfahren (ISO 276:2002)
Diese Internationale Norm legt die Anforderungen und die entsprechenden Prüfverfahren für fünf Typen von Leinöl Standöl für Beschichtungsstoffe fest.
Liants pour peintures et vernis - Standolies d'huile de lin - Exigences et méthodes d'essai (ISO 276:2002)
L'ISO 276:2002 spécifie les exigences et les méthodes d'essai correspondantes de cinq types de standolie d'huile de lin pour peintures et vernis.
Veziva za barve in lake - Polimerizirano laneno olje - Zahteve in preskusne metode (ISO 276:2002)
Ta mednarodni standard določa zahteve in ustrezne preskusne metode za pet vrst polimeriziranega lanenega olja, primernega za barve in lake.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2012
Veziva za barve in lake - Polimerizirano laneno olje - Zahteve in preskusne metode
(ISO 276:2002)
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test
(ISO 276:2002)
Bindemittel für Beschichtungsstoffe - Leinöl-Standöl - Anforderungen und Prüfverfahren
(ISO 276:2002)
Liants pour peintures et vernis - Standolies d'huile de lin - Exigences et méthodes d'essai
(ISO 276:2002)
Ta slovenski standard je istoveten z: EN ISO 276:2010
ICS:
87.060.20 Veziva Binders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 276
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 87.060.20
English Version
Binders for paints and varnishes - Linseed stand oil -
Requirements and methods of test (ISO 276:2002)
Liants pour peintures et vernis - Standolies d'huile de lin - Bindemittel für Beschichtungsstoffe - Leinöl-Standöl -
Exigences et méthodes d'essai (ISO 276:2002) Anforderungen und Prüfverfahren (ISO 276:2002)
This European Standard was approved by CEN on 16 October 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 276:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
The text of ISO 276:2002 has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 276:2010 by
Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 276:2002 has been approved by CEN as a EN ISO 276:2010 without any modification.
INTERNATIONAL ISO
STANDARD 276
Second edition
2002-07-01
Binders for paints and varnishes —
Linseed stand oil — Requirements and
methods of test
Liants pour peintures et vernis — Standolies d'huile de lin — Exigences et
méthodes d'essai
Reference number
ISO 276:2002(E)
©
ISO 2002
ISO 276:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and mic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.