EN 13920-13:2003
(Main)Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys
Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys
This part of this European Standard specifies characteristics, chemical composition and metal yield of aluminium scrap in the form of turnings consisting of two or more alloys. EXAMPLE Scalpings, millings, borings from plates, extruded profiles, castings etc..
Aluminium und Aluminiumlegierungen - Schrott - Teil 13: Gemischte Späne aus zwei oder mehr Legierungen
Diese Europäische Norm legt die Anforderungen an die Eigenschaften, die chemische Zusammensetzung und die Metallausbeute von Aluminiumschrott aus gemischten Spänen fest, der aus zwei oder mehr Legierungen besteht.
BEISPIEL Frässpäne, Drehspäne, Bohrspäne von Platten, Strangpressprofilen, Gussstücken.
Aluminium et alliages d'aluminium - Scrap (matières premières pour recyclage) - Partie 13: Tournures mélangées composées de deux ou plusieurs alliages
Cette Norme européenne spécifie les caractéristiques, la composition chimique et le rendement en métal du scrap constitué de tournures mélangées composées de deux ou plusieurs alliages.
EXEMPLE Copeaux de fraisage, tournures, copeaux d'alésage, provenant de tôles, profilés filés, moulages etc..
Aluminij in aluminijeve zlitine – Odpadni aluminij – 13. del: Mešani ostružki iz ene ali več zlitin
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Schrott - Teil 13: Gemischte Späne aus zwei oder mehr LegierungenAluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 13: Tournures mélangées composées de deux ou plusieurs alliagesAluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys13.030.50RecikliranjeRecyclingICS:Ta slovenski standard je istoveten z:EN 13920-13:2003SIST EN 13920-13:2004en01-januar-2004SIST EN 13920-13:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13920-13April 2003ICS 13.030.50; 77.120.10English versionAluminium and aluminium alloys - Scrap - Part 13: Mixedturnings consisting of two or more alloysAluminium et alliages d'aluminium - Scrap (matièrespremières pour recyclage) - Partie 13: Tournuresmélangées composées de deux ou plusieurs alliagesAluminium und Aluminiumlegierungen - Schrott - Teil 13:Gemischte Späne aus zwei oder mehr LegierungenThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13920-13:2003 ESIST EN 13920-13:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.