EN 302-6:2004
(Main)Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time
This part of EN 302 specifies a method for determining the conventional pressing time at three temperatures for adhesives for load-bearing timber structures.
This standard is only intended for obtaining a reliable basis for comparison of conventional pressing time between adhesives. The method gives results which cannot be applied to the safe manufacture of timber structures without modifications for the influences of timber density/absorbency, moisture content, factory temperature and relative air humidity.
Klebstoffe für tragende Holzbauteile - Prüfverfahren - Teil 6: Bestimmung der Mindestpresszeit
Dieser Teil von EN 302 legt ein Verfahren zur Bestimmung der Mindestpresszeit von Klebstoffen für tragende Holzbauteile bei drei festgelegten Klimaten fest.
Dieses Dokument dient nur dazu, die Mindestpresszeiten von Klebstoffen auf einer zuverlässigen Grundlage zu vergleichen. Die nach diesem Verfahren erhaltenen Ergebnisse können nicht unverändert für die zuverlässige Herstellung von Holzbauteilen verwendet werden, ohne die Einflüsse von Rohdichte und Absorptionsvermögen des Holzes, Feuchtegehalt, Verarbeitungstemperatur und relativer Luftfeuchte zu berücksichtigen.
Adhésifs pour structures portantes en bois - Méthodes d'essai - Partie 6 : Détermination de la durée conventionnelle de maintien sous pression
La présente partie de l'EN 302 décrit une méthode permettant de déterminer à trois températures la durée conventionnelle de maintien sous pression des adhésifs pour structures portantes en bois.
L'objectif du présent document est uniquement d'obtenir une base fiable afin de pouvoir comparer la durée conventionnelle de maintien sous pression des adhésifs. Cette méthode fournit des résultats qui ne sont pas applicables sans risque à la fabrication de structures en bois, sans des modifications prenant en compte l'influence de la masse volumique du bois et de son pouvoir d'absorption, de sa teneur en humidité ainsi que de la température et de l'humidité relative de l'air dans l'usine.
Lepila za nosilne lesene konstrukcije - Preskusne metode - 6. del: Določanje časa stiskanja
General Information
- Status
- Withdrawn
- Publication Date
- 13-Jul-2004
- Withdrawal Date
- 26-Mar-2013
- Technical Committee
- CEN/TC 193 - Adhesives
- Drafting Committee
- CEN/TC 193/SC 1/WG 8 - Revision of EN 301 and EN 302
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 27-Mar-2013
- Completion Date
- 27-Mar-2013
Relations
- Effective Date
- 03-Apr-2013
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Smithers Quality Assessments
US management systems and product certification.
DIN CERTCO
DIN Group product certification.
Sponsored listings
Frequently Asked Questions
EN 302-6:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time". This standard covers: This part of EN 302 specifies a method for determining the conventional pressing time at three temperatures for adhesives for load-bearing timber structures. This standard is only intended for obtaining a reliable basis for comparison of conventional pressing time between adhesives. The method gives results which cannot be applied to the safe manufacture of timber structures without modifications for the influences of timber density/absorbency, moisture content, factory temperature and relative air humidity.
This part of EN 302 specifies a method for determining the conventional pressing time at three temperatures for adhesives for load-bearing timber structures. This standard is only intended for obtaining a reliable basis for comparison of conventional pressing time between adhesives. The method gives results which cannot be applied to the safe manufacture of timber structures without modifications for the influences of timber density/absorbency, moisture content, factory temperature and relative air humidity.
EN 302-6:2004 is classified under the following ICS (International Classification for Standards) categories: 83.180 - Adhesives. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 302-6:2004 has the following relationships with other standards: It is inter standard links to EN 302-6:2013, EN 14080:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 302-6:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VWLVNDQMDKlebstoffe für tragende Holzbauteile - Prüfverfahren - Teil 6: Bestimmung der MindestpresszeitAdhésifs pour structures portantes en bois - Méthodes d'essai - Partie 6 : Détermination de la durée conventionnelle de maintien sous pressionAdhesives for load-bearing timber structures - Test methods - Part 6
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...