EN ISO 17201-1:2018
(Main)Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2018)
Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2018)
This document specifies a method to determine the acoustic source energy of the muzzle blast for calibres of less than 20 mm or explosive charges of less than 50 g TNT equivalent. It is applicable at distances where peak pressures less than 1 kPa (equivalent to a peak sound pressure level of 154 dB) are observed. The source energy, directivity of the source and their spectral structure determined by this procedure can be used as input data to sound propagation programmes, enabling the prediction of shooting noise in the neighbourhood of shooting ranges. Additionally, the data can be used to compare sound emission from different types of guns or different types of ammunition used with the same gun.
This document is applicable to guns used in civil shooting ranges but it can also be applied to military guns. It is not applicable to the assessment of hearing damage or sound levels in the non-linear region.
Suppressors and silencers are not taken into consideration in this document.
Akustik - Geräusche von Schießplätzen - Teil 1: Bestimmung des Mündungsknalls durch Messung (ISO 17201-1:2018)
Dieses Dokument legt ein Verfahren zur Bestimmung der akustischen Schallenergie des Mündungsknalls für Kaliber kleiner als 20 mm und Treibladungen von weniger als 50 g TNT Äquivalent fest. Das Verfahren ist in Entfernungen anwendbar, in denen Spitzenwerte der Schalldrücke von weniger als 1 kPa (äquivalent zu einem Spitzenschalldruckpegel von 154 dB) beobachtet werden. Die nach diesem Verfahren ermittelte Schallenergie, die Richtwirkung der Quelle und deren spektrale Zusammensetzung können als Eingangsdaten für Schall¬ausbreitungsprogramme verwendet werden, mit denen die Prognose von Schießgeräuschen in der Nachbarschaft von Schießplätzen ermöglicht wird. Zusätzlich können die Daten zum Vergleich der Schallemission verschiedener Arten von Schusswaffen oder verschiedener Arten von Munition mit derselben Waffe verwendet werden.
Dieses Dokument ist anwendbar für Schusswaffen ziviler Schießplätze und kann auch auf militärische Schusswaffen angewendet werden. Es ist nicht anwendbar zur Beurteilung von Gehörschädigungen oder Schall¬pegeln innerhalb des nichtlinearen Bereichs.
Suppressoren und Schalldämpfer werden in diesem Dokument nicht berücksichtigt.
Acoustique - Bruit des stands de tir - Partie 1: Mesurage de l´énergie sonore en sortie de bouche (ISO 17201-1:2018)
Le présent document spécifie une méthode permettant de déterminer l'énergie acoustique émise en sortie de bouche pour des armes de calibres inférieurs à 20 mm ou des charges explosives de moins de 50 g d'équivalent TNT. Elle est applicable à des distances où les valeurs de crête de pression acoustique observées sont inférieures à 1 kPa (équivalent à un niveau de pression acoustique de crête de 154 dB). L'énergie sonore émise, la directivité de la source et leur structure spectrale, déterminées par ce mode opératoire, peuvent être utilisées en tant que données d'entrée pour les modes de propagation du son permettant la prédiction du bruit généré par les tirs au voisinage des stands de tir. En outre, les données peuvent servir à comparer le bruit émis par différents types d'armes ou différents types de munitions utilisées par la même arme.
Le présent document concerne les armes utilisées dans les stands de tir, mais elle peut également s'appliquer aux armes à usage militaire. Elle n'est pas applicable pour les besoins d'une évaluation des dommages auditifs ou des niveaux sonores dans la zone non linéaire.
Les suppresseurs et silencieux ne sont pas pris en considération dans le présent document.
Akustika - Hrup s strelišč - 1. del: Določanje poka potisnih plinov iz ustja strelnih orožij z merjenjem (ISO 17201-1:2018)
Ta dokument določa metodo za določanje energije akustičnega vira poka potisnih plinov iz ustja strelnih orožij za kalibre, manjše od 20 mm, ali eksplozivne naboje, enakovredne manj kot 50 g TNT. Uporablja se pri razdaljah, pri katerih so vršni tlaki manjši od 1 kPa (enako vršni ravni zvočnega tlaka 154 dB). Energijo vira, usmerjenost vira in njegovo spektralno strukturo, določeno s tem postopkom, je mogoče uporabiti kot vhodne podatke za programe širjenja zvoka, kar omogoča napoved hrupa streljanja v bližini strelišč. Poleg tega je mogoče podatke uporabiti za primerjavo zvočnih emisij različnih vrst strelnega orožja ali različnih vrst streliva, uporabljenega pri istem strelnem orožju.
Ta dokument se uporablja za strelno orožje, ki se uporablja na civilnih streliščih, vendar ga je mogoče uporabiti tudi za vojaško
strelno orožje. Ne uporablja se za ocenjevanje poškodb sluha ali ravni zvoka v nelinearnem območju.
Dušilci v tem dokumentu niso upoštevani.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2019
1DGRPHãþD
SIST EN ISO 17201-1:2005
SIST EN ISO 17201-1:2005/AC:2009
$NXVWLND+UXSVVWUHOLãþGHO 'RORþDQMHSRNDSRWLVQLKSOLQRYL]XVWMDVWUHOQLK
RURåLM]PHUMHQMHP ,62
Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by
measurement (ISO 17201-1:2018)
Akustik - Geräusche von Schießplätzen - Teil 1: Bestimmung des Mündungsknalls durch
Messung (ISO 17201-1:2018)
Acoustique - Bruit des stands de tir - Partie 1: Mesurage de l´énergie sonore en sortie de
bouche (ISO 17201-1:2018)
Ta slovenski standard je istoveten z: EN ISO 17201-1:2018
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
95.020 Vojaštvo na splošno Military in general
97.220.10 Športni objekti Sports facilities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 17201-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2018
EUROPÄISCHE NORM
ICS 17.140.20; 95.020; 97.220.10 Supersedes EN ISO 17201-1:2005
English Version
Acoustics - Noise from shooting ranges - Part 1:
Determination of muzzle blast by measurement (ISO
17201-1:2018)
Acoustique - Bruit des stands de tir - Partie 1: Akustik - Geräusche von Schießplätzen - Teil 1:
Mesurage de l´énergie sonore en sortie de bouche (ISO Bestimmung des Mündungsknalls durch Messung (ISO
17201-1:2018) 17201-1:2018)
This European Standard was approved by CEN on 12 November 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17201-1:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 17201-1:2018) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 17201-1:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17201-1:2018 has been approved by CEN as EN ISO 17201-1:2018 without any
modification.
INTERNATIONAL ISO
STANDARD 17201-1
Second edition
2018-11
Acoustics — Noise from shooting
ranges —
Part 1:
Determination of muzzle blast by
measurement
Acoustique — Bruit des stands de tir —
Partie 1: Mesurage de l´énergie sonore en sortie de bouche
Reference number
ISO 17201-1:2018(E)
©
ISO 2018
ISO 17201-1:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
ISO 17201-1:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Gun and ammunition . 5
4.1 General . 5
4.2 Gun . 5
4.3 Ammunition . 6
4.4 Ballistic parameters . 7
4.5 Test situation . 8
4.6 Other features . 8
5 Basic concept for measurement and analysis . 8
5.1 General . 8
5.2 Quantity to be measured .10
5.3 Angular source energy distribution level .10
5.4 Interpolated angular source energy distribution level .11
5.5 Source energy level .11
5.6 Directivity .11
6 Measurement site .12
6.1 Site .12
6.2 Weather conditions .12
7 Measurement planning .12
7.1 General remarks .12
7.2 Gun .12
7.3 Measurement position.12
7.4 Measurement equipment .13
7.5 Dealing with projectile sound .13
8 Calibration and validation .13
9 Measurement procedures .14
9.1 General .14
9.2 Ground reflection correction .14
10 Control of measurement layout .14
11 Measurement uncertainty .15
11.1 General .15
11.2 Empirical part .15
12 Report .16
Annex A (informative) Small arms glossary .17
Annex B (informative) Example .28
Annex C (informative) Guidance on the measurement uncertainty .36
Bibliography .39
ISO 17201-1:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing Int
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.