EN ISO 11118:2015/prA1

SLOVENSKI STANDARD
01-april-2017
Plinske jeklenke - Kovinske plinske jeklenke za enkratno polnjenje - Specifikacija
in preskusne metode - Dopolnilo A1 (ISO 11118:2015/DAM 1:2017)
Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods
(ISO 11118:2015/DAM 1:2017)
Gasflaschen - Metallische Einwegflaschen - Spezifikationen und Prüfverfahren (ISO
11118:2015/DAM 1:2017)
Bouteilles à gaz - Bouteilles à gaz métalliques non rechargeables - Spécifications et
méthodes d'essai (ISO 11118:2015/DAM 1:2017)
Ta slovenski standard je istoveten z: EN ISO 11118:2015/prA1
ICS:
23.020.35 Plinske jeklenke Gas cylinders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT AMENDMENT
ISO 11118:2015/DAM 1
ISO/TC 58/SC 3 Secretariat: BSI
Voting begins on: Voting terminates on:
2017-02-02 2017-04-26
Gas cylinders — Non-refillable metallic gas cylinders —
Specification and test methods
AMENDMENT 1
Bouteilles à gaz — Bouteilles à gaz métalliques non rechargeables — Spécifications et méthodes d’essai
AMENDEMENT 1
ICS: 23.020.35
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 11118:2015/DAM 1:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

ISO 11118:2015/DAM 1:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 11118:2015/DAM 1:2017(E)
Foreword
ISO (the International Organization for Standardization) is
...