EN 12668-1:2000
(Main)Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
This standard specifies methods and acceptance criteria for assessing the electrical performance of analogue and digital ultrasonic instruments for pulse operation using A-scan display, employed for manual ultrasonic non-destructive examination with single or twin transducer probes operating within the centre frequency range 0,5 MHz to 15 MHz. Ultrasonic instruments for continuous waves are not included in this standard.
Zerstörungsfreie Prüfung - Charakterisierung und Verifizierung der Ultraschall-Prüfausrüstung - Teil 1: Prüfgeräte
Diese Europäische Norm legt Verfahen und Zulässigkeitskriterien fest, mit denen die elektrischen Eigenschaften von analogen und digitalen Ultraschall- Prüfgeräten für Impulsbetrieb, mit A-Bild-Darstellung, vorgesehen für die manuelle, zerstörungsfreie Ultraschallprüfung mit Einzelschwinger-Prüfköpfen und SE-Prüfköpfen, für den Frequenzbreich von 0,5 MHz bis 15 MHz, nachgewiesen werden sollen. Ultraschal-Prüfgeräte für Dauerschall sind von dieser Norm nicht betroffen.
Essais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons - Partie 1: Appareils
La présente partie de la norme spécifie les modes opératoires et les critères d'acceptation permettant d'évaluer les performances électriques des appareils de contrôle par ultrasons à mode impulsionnel, analogique et numérique, utilisant une représentation de type A, employés pour le contrôle non destructif par ultrasons en manuel, avec traducteurs simples ou à émetteur et récepteur séparés fonctionnant dans la gamme de fréquences centrales comprises entre 0,5 MHz et 15 MHz.
Neporušitveno preskušanje - Določanje lastnosti in preverjanje naprav za ultrazvočne preiskave - 1. del: Naprave
General Information
- Status
- Withdrawn
- Publication Date
- 23-May-2000
- Withdrawal Date
- 02-Feb-2010
- Technical Committee
- CEN/TC 138 - Non-destructive testing
- Drafting Committee
- CEN/TC 138/WG 2 - Ultrasonic testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 03-Feb-2010
- Completion Date
- 03-Feb-2010
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 06-Feb-2010
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
IMP NDT d.o.o.
Non-destructive testing services. Radiography, ultrasonic, magnetic particle, penetrant, visual inspection.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Q Techna d.o.o.
NDT and quality assurance specialist. 30+ years experience. NDT personnel certification per ISO 9712, nuclear and thermal power plant inspections, QA/
Sponsored listings
Frequently Asked Questions
EN 12668-1:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments". This standard covers: This standard specifies methods and acceptance criteria for assessing the electrical performance of analogue and digital ultrasonic instruments for pulse operation using A-scan display, employed for manual ultrasonic non-destructive examination with single or twin transducer probes operating within the centre frequency range 0,5 MHz to 15 MHz. Ultrasonic instruments for continuous waves are not included in this standard.
This standard specifies methods and acceptance criteria for assessing the electrical performance of analogue and digital ultrasonic instruments for pulse operation using A-scan display, employed for manual ultrasonic non-destructive examination with single or twin transducer probes operating within the centre frequency range 0,5 MHz to 15 MHz. Ultrasonic instruments for continuous waves are not included in this standard.
EN 12668-1:2000 is classified under the following ICS (International Classification for Standards) categories: 19.100 - Non-destructive testing. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12668-1:2000 has the following relationships with other standards: It is inter standard links to EN 12668-1:2010, EN 12668-3:2000, EN 12668-1:2000/A1:2004; is excused to EN 12668-3:2000, EN 12668-2:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12668-1:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12668-1:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zerstörungsfreie Prüfung - Charakterisierung und Verifizierung der Ultraschall-Prüfausrüstung - Teil 1: PrüfgeräteEssais non destructifs - Caractérisation et vérification de l'appareillage de contrôle par ultrasons - Partie 1: AppareilsNon-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments19.100Neporušitveno preskušanjeNon-destructive testingICS:Ta slovenski standard je istoveten z:EN 12668-1:2000SIST EN 12668-1:2001en01-maj-2001SIST EN 12668-1:2001SLOVENSKI
STANDARD
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...