EN 15436-4:2009

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za vzdrževalna dela zimske službe in službe za vzdrževanje cest - 4. del: Pogoji, ki jih za dobavo strojev postavljajo uporabnikiStraßenunterhaltungsgeräte - Teil 4: Leistungsbewertung für Maschinen durch die AnwenderMatériel d'entretien des dépendances routières - Partie 4: Réception des machines par les utilisateursRoad service area maintenance equipment - Part 4: Delivery acceptance of the machines by the users43.160Vozila za posebne nameneSpecial purpose vehiclesICS:Ta slovenski standard je istoveten z:EN 15436-4:2009SIST EN 15436-4:2009en,fr01-november-2009SIST EN 15436-4:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15436-4September 2009ICS 43.160 English VersionRoad service area maintenance equipment - Part 4: Deliveryacceptance of the machines by the usersMatériel d'entretien des dépendances routières - Partie 4:Réception des machines par les utilisateursStraßenunterhaltungsgeräte - Teil 4: Leistungsbewertungfür Maschinen durch die AnwenderThis European Standard was approved by CEN on 1 August 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15436-4:2009: ESIST EN 15436-4:2009

Key A Ground plane B Middle plane C Mowing strip Figure 1 — Central plane 3.5 operator's seat reference plane plane meeting the middle of the operator's seat with respect to the vehicle's direction of motion. The operator's seat is located in the middle position. If the operator seat is not aligned with the vehicle's direction of motion the middle position is also to be taken as the reference line. Should the carrier vehicle be unknown this data does not apply (Figure 2)
Key A Ground plane B Operator's seat reference plane Figure 2 — Operator's seat reference plane SIST EN 15436-4:2009

Key A Direction of mowing B Obstruction C Admissible area, which shall not be mowed D Admissible distance between end of mowing and obstruction E Admissible distance between mowing strip and obstruction F Admissible distance between beginning of mowing and obstruction G Accomplishable angle H Cutting device Figure 3 — View from top SIST EN 15436-4:2009
...