EN 15429-2:2012
(Main)Sweepers - Part 2: Performance requirements and test methods
Sweepers - Part 2: Performance requirements and test methods
This document applies to surface cleaning machines for outdoor applications in public areas, roads, airports and industrial complexes. Cleaning machines for winter maintenance and/or indoor applications are not included within the scope of this European Standard. Surface cleaning machines in terms of this standard, are self-propelled, truck mounted, attached sweeping equipment or pedestrian controlled.
This standard deals with the performance and functional characteristics and the test methods applied to the sweeping equipment when used as intended and under the conditions foreseen by the manufacturer.
This document does not include carrier vehicles (e.g. trucks). These are covered in national or EU Directives for vehicles.
This document does not apply to road surface cleaning equipment that would be front mounted on tractors according to EN 13524, or other vehicles.
This standard does not apply to machines or components that are specifically designed for cleaning tramlines and rail tracks.
This standard does not cover noise emission or any overload protection as these are covered by regulatory requirements.
Industrial sweepers, within the scope of EN 60335-2-72 are excluded from this standard.
Kehrmaschinen - Teil 2: Anforderungen an die Leistung und Prüfverfahren
Diese Europäische Norm gilt für Maschinen zur Oberflächenreinigung für den Einsatz im Außenbereich auf öffentlichen Verkehrsflächen, Straßen, Flughäfen und Industrieanlagen. Reinigungsmaschinen im Winter¬dienst und/oder zur Innenreinigung fallen nicht unter den Anwendungsbereich dieser Europäischen Norm. Oberflächenreinigungsmaschinen im Sinne dieser Norm sind zum einen selbstfahrende, auf Lkw-Fahr¬gestellen montierte oder angebaute Kehrmaschinen, aber auch von Fußgängern geführte Maschinen.
Diese Europäische Norm behandelt Leistungs- und Funktionsmerkmale und die für Kehrmaschinen geltenden Prüfverfahren, wenn diese bestimmungsgemäß und unter den vom Hersteller vorgesehenen Bedingungen verwendet werden.
Diese Europäische Norm bezieht sich nicht auf Trägerfahrzeuge (z. B. Lkw). Diese Fahrzeuge sind durch nationale Regelwerke oder EG-Richtlinien für Fahrzeuge abgedeckt.
Diese Europäische Norm gilt nicht für Straßenreinigungsmaschinen, die nach EN 13524 an landwirtschaft-lichen Zugmaschinen oder anderen Fahrzeugen vorn angebaut werden.
Diese Europäische Norm gilt nicht für Maschinen und Einrichtungen, die speziell zur Reinigung von Straßenbahn- oder Eisenbahngleisanlagen ausgelegt sind.
Diese Europäische Norm behandelt keine Geräuschemission oder Überlastschutz, da diese durch behördliche Anforderungen abgedeckt sind.
Industriekehrmaschinen im Anwendungsbereich von EN 60335-2-72 sind vom Anwendungsbereich dieser Norm ausgenommen.
Balayeuses - Partie 2: Exigences de performance et méthodes d’essai
Cette Norme européenne s’applique aux machines de nettoiement des chaussées dans le cadre d’une
utilisation à l’extérieur dans des zones publiques, des aéroports, des complexes industriels et sur des routes.
Les machines de nettoiement pour l’entretien d’hiver et/ou dans le cadre d’une utilisation à l’intérieur ne sont
pas incluses dans le domaine d’application de la présente Norme européenne. Les machines de nettoiement
des chaussées décrites dans la présente norme sont autopropulsées, montées sur camion, équipées d’un
dispositif de balayage fixé ou commandées par un conducteur accompagnant.
Cette Norme européenne norme traite de la performance et des caractéristiques de fonctionnement, ainsi que
des méthodes d’essai appliquées aux équipements de balayage lorsqu’ils sont utilisés dans le cadre de leur
usage normal et dans les conditions prévues par le fabricant.
Cette Norme européenne ne comprend pas les véhicules porteurs (par exemple camions). Ces derniers sont
traités dans les réglementations nationales ou dans les Directives UE relatives aux véhicules.
Cette Norme européenne ne s’applique pas aux équipements de nettoiement des chaussées qui sont montés
à l’avant de tracteurs selon l’EN 13524, ou d’autres véhicules.
Cette Norme européenne ne s’applique pas aux machines ou composants qui sont spécialement conçus pour
le nettoiement des lignes de tramway et des rails de chemin de fer.
Cette Norme européenne ne traite pas de l’émission sonore ou de la protection contre les surcharges, étant
donné que ces sujets sont couverts par les exigences réglementaires.
Les balayeuses industrielles traitées dans l’EN 60335-2-72 sont exclues du domaine d’application de la
présente norme.
Stroji za pometanje - 2. del: Izvedbene zahteve in preskusne metode
Ta evropski standard se uporablja za stroje za čiščenje površin za uporabo na prostem, in sicer na javnih površinah, cestah, letališčih in v industrijskih kompleksih. Stroji za čiščenje za zimska vzdrževalna dela in/ali uporabo v notranjih prostorih ne spadajo na področje uporabe tega evropskega standarda. Stroji za čiščenje površin v okviru tega standarda imajo lasten pogon, priklop na tovornjak, pripadajočo opremo za pometanje ali pa jih upravitelj upravlja stoje. Ta evropski standard obravnava izvedbene in funkcijske značilnosti ter preskusne metode, ki se uporabljajo za opremo za pometanje, kadar se uporablja v skladu z njenim namenom in pod pogoji, ki jih določa proizvajalec. Ta evropski standard ne vključuje nosilnih vozil (npr. tovornjakov). Ta vozila so zajeta v nacionalni zakonodaji ali direktivah EU v zvezi z vozili. Ta evropski standard se ne uporablja za opremo za čiščenje površin, ki omogoča namestitev na sprednji del traktorjev v skladu s standardom EN 13524 ali na druga vozila. Ta evropski standard se ne uporablja za stroje ali sestavne dele, ki so posebej zasnovani za čiščenje tramvajskih ali železniških prog. Ta evropski standard ne zajema emisij hrupa ali kakršne koli preobremenitvene zaščite, ker so zajete v regulativnih zahtevah. Iz tega standarda so izvzeti industrijski stroji za pometanje, ki spadajo na področje uporabe standarda EN 60335-2-72.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stroji za pometanje - 2. del: Izvedbene zahteve in preskusne metodeKehrmaschinen - Teil 2: Anforderungen an die Leistung und PrüfverfahrenBalayeuses - Partie 2: Exigences de performance et méthodes d’essaiSweepers - Part 2: Performance requirements and test methods43.160Vozila za posebne nameneSpecial purpose vehicles13.030.40Naprave in oprema za odstranjevanje in obdelavo odpadkovInstallations and equipment for waste disposal and treatmentICS:Ta slovenski standard je istoveten z:EN 15429-2:2012SIST EN 15429-2:2013en,fr,de01-marec-2013SIST EN 15429-2:2013SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15429-2
December 2012 ICS 43.160 English Version
Sweepers - Part 2: Performance requirements and test methods Balayeuses - Partie 2: Exigences de performance et méthodes d'essai
Kehrmaschinen - Teil 2: Anforderungen an die Leistung undPrüfverfahren This European Standard was approved by CEN on 27 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15429-2:2012: ESIST EN 15429-2:2013
Air velocity and volume measurement using the Pilot tube method . 15Annex B (informative)
Test Report - Fuel consumption . 17Annex C (informative)
Example - Grade-ability test and calculation . 18C.1 Introduction . 18C.2 Test Procedure – Tractive Effort – Ability to start on and climb a gradient . 18C.2.1 General . 18C.2.2 Test result and calculation . 19C.3 Test Procedure – Braking Effort - Ability to slow, stop and hold on a gradient . 19C.3.1 General . 19C.3.2 Test Result and Calculation . 19Bibliography . 20 SIST EN 15429-2:2013
Most of these sweepers are equipped with sweep gear to scarify debris with a pick-up system that collects and conveys the spoil into a hopper. This hopper can be discharged at dumping grounds, unloading stations, into containers or at refuse transfer stations. Sweeping applications are mainly related to the physical size and dimensions of the sweeper. Sweepers of larger dimensions are designed to operate mainly on streets, highways, motorways, large parking areas and within industrial complexes. Sweepers of smaller dimensions are designed for the cleaning of inner town streets, pedestrian zones, pavements, bicycle lanes, car parking facilities market places and within industrial plants etc. Manœuvrability is one of the main features of this category of sweeper. Depending on the dimensions, sweeping attachment equipment (e.g. equipment temporally mounted on multi-purpose carrier vehicles or other machines) may be used in similar applications as above. Additional equipment for specialised cleaning applications; that may be attached to a sweeper is not covered by this standard. This document (EN 15429-2:2012) is part of a series of documents made up of the following parts: EN 15429-1, Sweepers - Part 1: Classification and Terminology; EN 15429-2, Sweepers - Part 2: Performance requirements and test methods; prEN 15429-3, Sweepers - Part 3: Efficiency of particulate matter collection - Testing and Evaluation; prEN 15429-4, Sweepers - Part 4: Symbols for operator controls and other displays. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 15429-2:2013
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.