EN 16523-1:2015+A1:2018
(Main + Amendment)Determination of material resistance to permeation by chemicals - Part 1: Permeation by potentially hazardous liquid chemicals under conditions of continuous contact
Determination of material resistance to permeation by chemicals - Part 1: Permeation by potentially hazardous liquid chemicals under conditions of continuous contact
This European Standard specifies a test method for the determination of the resistance of protective clothing, gloves and footwear materials to permeation by potential hazardous liquid chemicals under the condition of continuous contact.
This test method is applicable to the assessment of protection against liquid chemicals that can be collected only by liquid or gaseous collecting media.
This test method is not adapted for the assessment of chemical mixtures, except for aqueous solutions.
This standard shall be used with the specifications given in the products standards (for examples EN 374 1 for gloves) where the following information shall be defined:
- any pre-conditioning;
- precise sampling (place, size, number);
- associated levels of performance.
Bestimmung des Widerstands von Materialien gegen die Permeation von Chemikalien - Teil 1: Permeation durch potentiell gefährliche flüssige Chemikalien unter Dauerkontakt
Diese Europäische Norm legt ein Prüfverfahren für die Bestimmung des Widerstands von Schutzkleidungs-material, Schutzhandschuh- und Fußschutzmaterial gegen die Permeation durch potentiell gefährliche flüssige Chemikalien unter Dauerkontakt fest.
Dieses Prüfverfahren gilt für die Beurteilung des Schutzes gegen flüssige chemische Stoffe, die nur mit flüssigen oder gasförmigen Sammelmedien erfasst werden können.
Dieses Prüfverfahren !ist nicht anwendbar bei der" Beurteilung von chemischen Gemischen, ausgenommen sind wässrige Lösungen.
Diese Norm ist gemeinsam mit den in den Produktnormen angegebenen Festlegungen zu verwenden (z. B. !EN ISO 374-1:2016" für Schutzhandschuhe), wo die folgenden Informationen festgelegt sind:
— jegliche Vorbehandlung;
— genaue Probenahme (Ort, Größe, Anzahl);
— zugeordnete Leistungsstufen.
Détermination de la résistance des matériaux à la perméation par des produits chimiques - Partie 1: Perméation par des produits chimiques liquides potentiellement dangereux dans des conditions de contact continu
La présente Norme européenne spécifie une méthode d'essai pour la détermination de la résistance des
matériaux utilisés dans la confection de vêtements de protection, gants et chaussures à la perméation
par des produits chimiques liquides potentiellement dangereux, dans des conditions de contact continu.
La présente méthode d'essai s'applique à l'évaluation de la protection contre les produits chimiques
liquides qui ne peuvent être collectés qu'au moyen d'un milieu collecteur liquide ou gazeux.
La présente méthode d'essai n'est pas !applicable" à l'évaluation de mélanges de produits
chimiques, à l'exception des solutions aqueuses.
La présente norme est utilisée avec les spécifications fournies dans les normes de produits (par
exemple, l'!EN ISO 374-1:2016" pour les gants), dans lesquelles les informations suivantes sont
définies :
tout préconditionnement ;
un échantillonnage précis (endroit, taille, nombre) ;
les niveaux de performance correspondants.
Ugotavljanje odpornosti materiala proti pronicanju kemikalij - 1. del: Pronicanje potencialno nevarnih tekočih kemikalij pri pogojih neprestanega stika
Ta evropski standard določa preskusno metodo za ugotavljanje odpornosti materialov varovalne obleke, rokavic in obutve proti pronicanju potencialno nevarnih tekočih kemikalij v pogojih neprekinjenega stika.
Ta preskusna metoda se uporablja za vrednotenje varovanja pred tekočimi kemikalijami, ki jih je mogoče zbrati samo s tekočimi ali plinskimi mediji za zbiranje.
Te preskusna metoda ni prilagojene za ocenjevanje kemijskih zmesi, razen za vodne raztopine.
Ta standard je treba uporabljati s specifikacijami, podanimi v standardu za izdelke (kot je standard EN 374 1 za rokavice), kjer so opredeljene naslednje informacije:
– morebitni predpogoji;
– natančno vzorčenje (kraj, velikost, število);
– povezane ravni zmogljivosti.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WLNDBestimmung des Widerstands von Materialien gegen die Permeation von Chemikalien - Teil 1: Permeation durch potentiell gefährliche flüssige Chemikalien unter DauerkontaktDétermination de la résistance des matériaux à la perméation par des produits chimiques - Partie 1: Perméation par des produits chimiques liquides potentiellement dangereux dans des conditions de contact continuDetermination of material resistance to permeation by chemicals - Part 1: Permeation by potentially hazardous liquid chemicals under conditions of continuous contact13.340.01Varovalna oprema na splošnoProtective equipment in generalICS:Ta slovenski standard je istoveten z:EN 16523-1:2015+A1:2018SIST EN 16523-1:2015+A1:2018en,fr,de01-december-2018SIST EN 16523-1:2015+A1:2018SLOVENSKI
STANDARDSIST EN 16523-1:20151DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16523-1:2015+A1
October
t r s z ICS
s uä u v rä r s Supersedes EN
s x w t uæ sã t r s wEnglish Version
Determination of material resistance to permeation by chemicals æ Part
sã Permeation by potentially hazardous liquid chemicals under conditions of continuous contact Détermination de la résistance des matériaux à la perméation par des produits chimiques æ Partie
sã Perméation par des produits chimiques liquides potentiellement dangereux dans des conditions de contact continu
Bestimmung des Widerstands von Materialien gegen die Permeation von Chemikalien æ Teil
sã Permeation durch potentiell gefährliche flüssige Chemikalien unter Dauerkontakt This European Standard was approved by CEN on
w December
t r s v and includes Amendment
s approved by CEN on
y May
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x w t uæ sã t r s w ªA sã t r s z ESIST EN 16523-1:2015+A1:2018
Types of permeation behaviour . 18 Annex B (informative)
Physical assessment of the samples . 20 B.1 General . 20 B.2 Visual appearance . 20 B.3 Thickness . 20 B.4 Mass . 20 B.5 Hardness . 20 Annex C (informative)
Example of appropriate technique for the detection of chemicals . 21 SIST EN 16523-1:2015+A1:2018
!Possible techniques to assess flow and stirring for permeation with liquid collecting medium" . 23 D.1 For the open loop system . 23 D.2 For open and closed loop system . 23 D.3 For open and close loop system . 24 Annex E (informative)
Example of permeation cell . 25 Annex F (informative)
Results of the interlaboratory trials . 27 Bibliography . 29
This method provides tests results in terms of breakthrough time. This parameter is a key measure of the effectiveness of a material to act as a barrier to the challenge chemical. Such information is used in the comparison of the performances of PPE materials during the process of selecting PPE for protection from hazardous chemicals. Long breakthrough times are characteristic of high permeation resistance. Breakthrough time does not provide a correlation between protection and the toxicity of the chemicals tested, only cumulative permeation can provide this information. It has been assumed in the drafting of this part of EN 16523 that the execution of its provisions will be entrusted to appropriately qualified and experienced people with a sound understanding of analytical chemistry. Appropriate precautions should be taken when carrying out this type of testing in order to avoid injury to health and contamination of the environment. A future part of EN 16523 will explain the use of the series of standards EN 16523. SIST EN 16523-1:2015+A1:2018
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.