EN 12927-3:2004
(Main)Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes
Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes
This part of EN 12927 specifies the safety requirements applicable to long splicing of steel wires 6 strand hauling, carrying-hauling and towing ropes for installations for passenger transportation by rope. This standard is applicable to the various types installations systems and their environment.
This part of EN 12927 applies to the requirements for the long splicing, repair and shortening of hauling and carrying hauling ropes that meet the requirements of EN 12385 8.
This part of EN 12927 does not apply to installations for the transportation of goods, nor to inclined lifts.
Sicherheitsanforderungen für Seilbahnen für den Personenverkehr - Seile - Teil 3: Langspleiß von 6-litzigen Zug- und Förderseilen für Seilbahnen
Diese Europäische Norm legt die Sicherheitsanforderungen für "Seile - Langspleiß von 6-litzigen Zug- und Förderseilen" der Seilbahnen und Schleppaufzüge des Personenverkehrs fest. Dabei werden die verschiedenen Seilbahn- und Schleppaufzugssyteme und deren Umgebung berücksichtigt. Diese Europäische Norm legt die Anforderungen für Langspleiße und Reparatur und Kürzung von Zugseilen und Förderseilen (auch für Schleppaufzüge) in Übereinstimmung mit der WI 00168053 fest.
Prescriptions de sécurité des installations de transport à câbles destinées aux personnes - Câbles - Partie 3 : Épissurage des câbles tracteurs, porteurs-tracteurs et de remorquage à 6 torons
La présente partie du prEN 12927 spécifie les prescriptions de sécurité s'appliquant à l'épissurage des câbles tracteurs, porteurs-tracteurs et de remorquage à 6 torons des installations de transport à câbles destinées aux personnes. La présente norme s'applique aux différents systèmes d'installations et à leur environnement.
La présente partie du prEN 12927 s'applique aux prescriptions relatives à l'épissurage, à la réparation et au raccourcissement des câbles tracteurs et porteurs-tracteurs conformes aux prescriptions de l'EN 12385 8.
La présente partie du prEN 12927 ne s'applique ni aux installations de transport des marchandises, ni aux ascenseurs inclinés.
Varnostne zahteve za žičniške naprave za prevoz oseb – Vrvi – 3. del: Dolgi spleti 6-pramenskih vlečnih, transportnih vrvi in transportnih vrvi vlečnic
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropesQLFPrescriptions de sécurité des installations de transport a câbles destinées aux personnes - Câbles - Partie 3 : Épissurage des câbles tracteurs, porteurs-tracteurs et de remorquage a 6 toronsSicherheitsanforderungen für Seilbahnen für den Personenverkehr - Seile - Teil 3: Langspleiß von 6-litzigen Zug- und Förderseilen für SeilbahnenTa slovenski standard je istoveten z:EN 12927-3:2004SIST EN 12927-3:2005en45.100Cableway equipmentICS:SLOVENSKI
STANDARDSIST EN 12927-3:200501-januar-2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12927-3October 2004ICS 45.100 English versionSafety requirements for cableway installations designed to carrypersons - Ropes - Part 3: Long splicing of 6 strand hauling,carrying hauling and towing ropesPrescriptions de sécurité des installations de transport àcâbles destinées aux personnes - Câbles - Partie 3 :Épissurage des câbles tracteurs, porteurs-tracteurs et deremorquage à 6 toronsSicherheitsanforderungen für Seilbahnen für denPersonenverkehr - Seile - Teil 3: Langspleiß von 6-litzigenZug- und Fördeseilen für SeilbahnenThis European Standard was approved by CEN on 23 August 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12927-3:2004: E
Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons.9 Table ZA — Correspondence between this European Standard and Directive 2000/9/EC relating to cableway installations designed to carry persons.9
– Ropes": Part 1: Selection criteria for ropes and their end fixings Part 2: Safety factors Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes Part 4: End fixings Part 5: Storage, transportation, handling and tensioning Part 6: Discard criteria Part 7: Inspection, repair and maintenance Part 8: Magnetic rope testing (MRT) This European Standard forms part of the standards programme adopted by the CEN Technical Board in relation of safety requirements for passenger transportation by rope. This programme includes the following standards: 1) Safety requirements for cableway installations designed to carry persons
- Terminology 2) Safety requirements for cableway installations designed to carry persons
- General requirements 3) Safety requirements for cableway installations designed to carry persons
- Calculations 4) Safety requirements for cableway installations designed to carry persons
- Ropes 5) Safety requirements for cableway installations designed to carry persons
- Tensioning devices 6) Safety requirements for cableway installations designed to carry persons
- Drive systems and other mechanical equipment 7) Safety requirements for cableway installations designed to carry persons
- Carriers 8) Safety requirements for cableway installations designed to carry persons
- Electrical equipment other than for drive systems 9) Safety requirements for cableway installations designed to carry persons
- Civil engineering works
– Pre-commissioning inspection, maintenance and operational inspection and checks 11) Safety requirements for cableway installations designed to carry persons
– Recovery and evacuation 12) Safety requirements for cableway installations designed to carry persons
- Operation 13) Safety requirements for cableway installations designed to carry persons
- Quality assurance Together these form a series of standards regarding design, manufacture, production, maintenance and operation of all installations for passenger transportation by rope. In respect of ski-tows, the drafting of this European Standard has been guided by the works of the International Organisation for Transportation by rope (OITAF). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.