EN ISO 8666:2016

SLOVENSKI STANDARD
01-oktober-2016
1DGRPHãþD
SIST EN ISO 8666:2003
Mala plovila - Osnovni podatki (ISO 8666:2016)
Small craft - Principal data (ISO 8666:2016)
Kleine Wasserfahrzeuge - Hauptdaten (ISO 8666:2016)
Petits navires - Données principales (ISO 8666:2016)
Ta slovenski standard je istoveten z: EN ISO 8666:2016
ICS:
47.080 ýROQL Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 8666
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2016
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 8666:2002
English Version
Small craft - Principal data (ISO 8666:2016)
Petits navires - Données principales (ISO 8666:2016) Kleine Wasserfahrzeuge - Hauptdaten (ISO 8666:2016)
This European Standard was approved by CEN on 26 May 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8666:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2013/53/EU . 4

European foreword
This document (EN ISO 8666:2016) has been prepared by Technical Committee ISO/TC 188 ”Small
craft”.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2017, and conflicting national standards
shall be withdrawn at the latest by February 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 8666:2002.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8666:2016 has been approved by CEN as EN ISO 8666:2016 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2013/53/EU
This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide one means of conforming to Essential
Requirements of the New Approach Directive 2013/53/EU.
Once this standard is cited in the Official Journal of the European Communities under that Directive and
has been implemented as a national standard in at least one Member State, compliance with the
normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this
standard, a presumption of conformity with the corresponding Essential Requirements of that Directive
and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 2013/53/EU
Clause(s)/subclause(s) of this Essential requirements (ERs) of
Qualifying remarks/Notes
European Standard EU Directive 2013/53/EU
2, 3, 4, 5, 6, 7 Annex I This European Standard establishes
definitions for main dimensions and
related data, mass specifications and
loading conditions that may be
required for the technical details of
harmonized standards that provide a
presumption of conformity with
Directive 2013/53/EU.
WARNING: Other requirements and other EU Directives may be applicable to the products falling
within the scope of this standard.

INTERNATIONAL ISO
STANDARD 8666
Second edition
2016-07-01
Small craft — Principal data
Petits navires — Données principales
Reference number
ISO 8666:2016(E)
©
ISO 2016
ISO 8666:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

ISO 8666:2016(E)
Contents Page
Foreword .v
1 Scope . 1
2 Terms and definitions . 1
3 Symbols, designations and units . 2
4 Measurements . 3
4.1 General . 3
4.2 Longitudinal . 4
4.2.1 General. 4
4.2.2 Maximum length, L .
max 4
4.2.3 Length of the hull, L .
H 4
4.2.4 Waterline length, L .
WL 7
4.3 Athwartship . 8
4.3.1 General. 8
4.3.2 Maximum beam, B .
max 8
4.3.3 Beam of hull, B .
H 8
4.3.4 Beam, waterline, B .
WL 8
4.3.5 Maximum beam, waterline, B .
WLmax 8
4.3.6 Beam between hull centers, B .
CB 8
4.4 Vertical . 9
4.4.1 Maximum depth, D .
max 9
4.4.2 Midship depth, D .
LWL/2 9
4.4.3 Freeboard, F .10
4.4.4 Draught, T .10
4.4.5 Draught, air, H .
a 10
4.4.6 Headroom .11
4.5 Other data .11
4.5.1 Deadrise angle, β . .11
4.5.2 Reference sail area, A .
S 12
4.5.3 Standard sail area, A’ .
S 12
4.5.4 Windage area, A .
lv 12
4.5.5 Volume of the craft, V .12
5 Masses.13
5.1 Mass, net shipping, m .
N 13
5.2 Mass, gross shipping, m .
G 13
5.3 Mass, light craft, m .
LC 14
5.3.1 Items of equipment included in m .
LC 14
5.3.2 Items of equipment and other items not included in m .
LC 15
5.4 Performance test mass, m .
P 15
5.5 Mass of the craft when towed on a trailer, m .
T 16
5.5.1 General.16
5.5.2 Items of equipment included in m .
...