Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters (ISO 7787-1:2016)

ISO 7787-1:2016 specifies dimensional and other requirements for the nine most commonly used steel cutters which are predominantly used in the dental laboratory.
Other characteristics of laboratory cutters, for example, spiralled blades or cross-cut, are not covered by this part of ISO 7787.
NOTE          These cutters are also used in podiatry.

Zahnheilkunde - Laborfräser - Teil 1: Laborfräser aus Stahl (ISO 7787-1:2016)

Dieser Teil von ISO 7787 legt Anforderungen an Maße und weitere Eigenschaften für die neun am häufigsten verwendeten Stahlfräser fest, die überwiegend im Zahntechnikerlabor verwendet werden.
Andere Eigenschaften von Laborfräsern, zum Beispiel, Spiralverzahnungen oder Querhieb, sind in diesem Teil von ISO 7787 nicht enthalten.
ANMERKUNG   Diese Fräser werden auch für die Fußpflege verwendet.

Médecine bucco-dentaire - Fraises de laboratoire - Partie 1: Fraises de laboratoire en acier (ISO 7787-1:2016)

ISO 7787-1:2016 spécifie les caractéristiques dimensionnelles et d'autres exigences pour les neuf fraises en acier les plus communément utilisées au laboratoire dentaire.
Les autres caractéristiques des fraises de laboratoire, par exemple les dents spiralées ou les surtailles, ne sont pas couvertes par la présente partie de l'ISO 7787.
NOTE          Ces fraises sont également utilisées en podologie.

Zobozdravstvo - Laboratorijska rezila - 1. del: Jeklena laboratorijska rezila (ISO 7787-1:2016)

Ta del standarda ISO 7787 določa zahteve glede mer in druge zahteve za devet najpogosteje uporabljenih jeklenih rezil, ki se uporabljajo predvsem v dentalnem laboratoriju.
Druge značilnosti laboratorijskih rezil, na primer spiralnih ali prečnih rezil, niso zajete v tem delu standarda ISO 7787.
OPOMBA: Ta rezila se uporabljajo tudi v podiatriji.

General Information

Status
Published
Publication Date
17-May-2016
Withdrawal Date
29-Nov-2016
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-May-2016
Completion Date
18-May-2016

Relations

Buy Standard

Standard
EN ISO 7787-1:2016
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2016
1DGRPHãþD
SIST EN 27787-1:2000
SIST EN 27787-1:2000/AC1:2000
Zobozdravstvo - Laboratorijska rezila - 1. del: Jeklena laboratorijska rezila (ISO
7787-1:2016)
Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters (ISO 7787-1:2016)
Zahnheilkunde - Laborfräser - Teil 1: Laborfräser aus Stahl (ISO 7787-1:2016)
Médecine bucco-dentaire - Fraises de laboratoire - Partie 1 : Fraises de laboratoire en
acier (ISO 7787-1:2016)
Ta slovenski standard je istoveten z: EN ISO 7787-1:2016
ICS:
11.060.20 =RERWHKQLþQDRSUHPD Dental equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 7787-1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2016
EUROPÄISCHE NORM
ICS 11.060.20 Supersedes EN 27787-1:1990
English Version
Dentistry - Laboratory cutters - Part 1: Steel laboratory
cutters (ISO 7787-1:2016)
Médecine bucco-dentaire - Fraises de laboratoire - Zahnheilkunde - Laborfräser - Teil 1: Laborfräser aus
Partie 1: Fraises de laboratoire en acier (ISO 7787- Stahl (ISO 7787-1:2016)
1:2016)
This European Standard was approved by CEN on 15 April 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7787-1:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 7787-1:2016) has been prepared by Technical Committee ISO/TC 106
“Dentistry” in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2016, and conflicting national standards
shall be withdrawn at the latest by November 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 27787-1:1990.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7787-1:2016 has been approved by CEN as EN ISO 7787-1:2016 without any
modification.
INTERNATIONAL ISO
STANDARD 7787-1
Second edition
2016-05-01
Dentistry — Laboratory cutters —
Part 1:
Steel laboratory cutters
Médecine bucco-dentaire — Fraises de laboratoire —
Partie 1: Fraises de laboratoire en acier
Reference number
ISO 7787-1:2016(E)
©
ISO 2016
ISO 7787-1:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

ISO 7787-1:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
3.1 Terms and definitions . 1
3.2 Symbols . 2
4 Material . 2
5 Dimensions and number of blades . 2
5.1 Round (spherical) . 2
5.2 Cylindrical, double domed . 3
5.3 Egg . 3
5.4 Oval, transverse . 3
5.5 Bud, rounded . 4
5.6 Bud . 4
5.7 Pear . 5
5.8 Bud, slender . 5
5.9 Wheel . 6
6 Run-out . 6
7 Sampling . 6
8 Designation code number .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.