prEN 3014

SLOVENSKI STANDARD
01-september-2022
Aeronavtika - Sidrne/utrdilne matice, samoblokirne, nazobčane, iz
toplotnoodpornega jekla FE-PA2601 (A286) - Klasifikacija: 1100 MPa (pri okoljski
temperaturi)/650 °C
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601
(A286) - Classification: 1 100 MPa (at ambient temperature) / 650 °C
Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, verzahnt, aus hochwarmfestem
Stahl FE-PA2601 (A286) - Klasse: 1 100 MPa (bei Raumtemperatur) / 650 °C
Série aérospatiale - Écrous à sertir, dentelés, à freinage interne, en acier résistant à
chaud FE-PA2601 (A286) - Classification : 1 100 MPa (à température ambiante)/650 °C
Ta slovenski standard je istoveten z: prEN 3014
ICS:
49.025.10 Jekla Steels
49.030.30 Matice Nuts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2022
ICS 49.030.30 Will supersede EN 3014:2015
English Version
Aerospace series - Shank nuts, self-locking, serrated, in
heat resisting steel FE-PA2601 (A286) - Classification: 1
100 MPa (at ambient temperature) / 650 °C
Série aérospatiale - Écrous à sertir, dentelés, à freinage Luft- und Raumfahrt - Einnietmuttern, selbstsichernd,
interne, en acier résistant à chaud FE-PA2601 (A286) - verzahnt, aus hochwarmfestem Stahl FE-PA2601
Classification : 1 100 MPa (à température (A286) - Klasse: 1 100 MPa (bei Raumtemperatur) /
ambiante)/650 °C 650 °C
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3014:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Configuration — Dimensions — Tolerances — Masses . 4
4.2 Materials . 5
5 Designation . 6
6 Marking . 6
7 Technical specification . 7
8 Installation . 7
Annex A (informative) Standard evolution form . 8
Bibliography . 9

European foreword
This document (prEN 3014:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, t
...