EN 10130:1991
(Main)Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
[As modified by Amendment A1 :1998] This European Standard applies to cold-rolled non-coated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm, and unless otherwise agreed at the time of the order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet. It does not apply to cold-rolled narrow strip (rolling width < 600 mm) nor to flat cold-rolled products for which there is a specific standard in particular the following: - cold-rolled non-grain oriented magnetic steel sheet and strip (EN 10106); - semi-processed steel strip for the construction or magnetic circuits CEN 10126 and EN 10165); - blackplate in coils (EN 10205); - steel sheet and strip for welded gas cylinders (EN 10120); - hot-rolled flat products in high yield strength steels for cold forming EN 10149-2-3); - cold-rolled flat products in high yield strength steels for cold forming (prEN 10268); - cold-rolled uncoated non alloy mild steel narrow strip for cold forming (pr EN 10139); - cold-rolled low carbon steel flat products for vitreous enamelling (EN 10209); - cold-rolled structural steels for general purposes.
Kaltgewalzte Flacherzeugnisse aus weichen Stählen zum Kaltumformen - Technische Lieferbedingungen
Diese Europäische Norm gilt für kaltgewalzte Flacherzeugnisse ohne Überzug in Walzbreiten >= 600 mm und Dicken von 0,35 bis - sofern bei der Bestellung nichts anderes vereinbart wird - 3 mm aus weichen Stählen, die zum Kaltumformen bestimmt sind und als Blech, Breitband, längsgeteiltes Breitband oder Stäbe aus längsgeteiltem Breitband oder Blech geliefert werden.
Produits plats laminés à froid, en acier doux pour emboutissage au pliage à froid - Conditions techniques de livraison
La présente Norme européenne est applicable aux produits plats laminés à froid, non revêtus, de largeur supérieure ou égale à 600 mm, d'épaisseur au moins égale à 0,35 mm et, sauf accord à la commande, inférieure ou égale à 3 mm, en acier doux, destinés à l'emboutissage ou au pliage froid, livrés en tôles, larges bandes, larges bandes refendues, barres obtenues à partir de larges bandes refendues ou de tôles.
Hladno valjani ploščati izdelki iz maloogljičnih jekel za preoblikovanje v hladnem - Tehnični dobavni pogoji
General Information
- Status
- Withdrawn
- Publication Date
- 19-Feb-1991
- Withdrawal Date
- 19-May-1998
- Technical Committee
- ECISS/TC 109 - Coated and uncoated flat products to be used for cold forming
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 20-May-1998
- Completion Date
- 20-May-1998
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 24-Sep-2011
- Referred By
EN 50216-9:2009 - Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers - Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10130:1991 is a standard published by the European Committee for Standardization (CEN). Its full title is "Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions". This standard covers: [As modified by Amendment A1 :1998] This European Standard applies to cold-rolled non-coated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm, and unless otherwise agreed at the time of the order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet. It does not apply to cold-rolled narrow strip (rolling width < 600 mm) nor to flat cold-rolled products for which there is a specific standard in particular the following: - cold-rolled non-grain oriented magnetic steel sheet and strip (EN 10106); - semi-processed steel strip for the construction or magnetic circuits CEN 10126 and EN 10165); - blackplate in coils (EN 10205); - steel sheet and strip for welded gas cylinders (EN 10120); - hot-rolled flat products in high yield strength steels for cold forming EN 10149-2-3); - cold-rolled flat products in high yield strength steels for cold forming (prEN 10268); - cold-rolled uncoated non alloy mild steel narrow strip for cold forming (pr EN 10139); - cold-rolled low carbon steel flat products for vitreous enamelling (EN 10209); - cold-rolled structural steels for general purposes.
[As modified by Amendment A1 :1998] This European Standard applies to cold-rolled non-coated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm, and unless otherwise agreed at the time of the order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet. It does not apply to cold-rolled narrow strip (rolling width < 600 mm) nor to flat cold-rolled products for which there is a specific standard in particular the following: - cold-rolled non-grain oriented magnetic steel sheet and strip (EN 10106); - semi-processed steel strip for the construction or magnetic circuits CEN 10126 and EN 10165); - blackplate in coils (EN 10205); - steel sheet and strip for welded gas cylinders (EN 10120); - hot-rolled flat products in high yield strength steels for cold forming EN 10149-2-3); - cold-rolled flat products in high yield strength steels for cold forming (prEN 10268); - cold-rolled uncoated non alloy mild steel narrow strip for cold forming (pr EN 10139); - cold-rolled low carbon steel flat products for vitreous enamelling (EN 10209); - cold-rolled structural steels for general purposes.
EN 10130:1991 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10130:1991 has the following relationships with other standards: It is inter standard links to EN 10130:1991 + A1:1998, EN 50216-9:2009, EN 50131-2-6:2008, CR 10313:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10130:1991 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071, M/BC/CEN/86/1. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10130:1991 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kaltgewalzte Flacherzeugnisse aus weichen Stählen zum Kaltumformen - Technische LieferbedingungenProduits plats laminés a froid, en acier doux pour emboutissage au pliage a froid - Conditions techniques de livraisonCold rolled low carbon steel flat products for cold forming - Technical delivery conditions77.140.50SROL]GHONLFlat steel products and semi-productsICS:Ta slovenski standard je istoveten z:EN 10130:1991SIST EN 10130:1997en01-dece
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...