EN 10130:1991 + A1:1998
(Main + Amendment)Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
The second paragraph should read as follows: It does not apply to cold-rolled narrow strip (rolling width < 600 mm) nor to flat cold-rolled products for which there is a specific standard, in particular the following: - cold-rolled non-grain oriented magnetic steel sheet and strip (prEN 10106), - semi-processed steel strip for the construction of magnetic circuits (prEN 10126 and prEN 10165); - cold-rolled blackplate in coils for the production of tinplate or electrolytic chrome iron (EN 10205).
Kaltgewalzte Flacherzeugnisse aus weichen Stählen zum Kaltumformen - Technische Lieferbedingungen
Der zweite Absatz ist wie folgt zu ändern: Diese Norm gilt nicht für Kaltband (in Walzbreiten < 600 mm), ferner nicht für kaltgewalzte Flacherzeugnisse, für die eigene Normen bestehen, z.B. für folgende Erzeugnisse: - Kaltgewalztes nichtkornorientiertes Elektroblech und -band (prEN 10106); - Kaltgewalztes nichtschlußgeglühtes Elektroband (prEN 10126 und prEN 10165); - Kaltgewalztes Feinstblech in Rollen zur Herstellung von Weißblech oder von elektrolytisch spezialverchromtem Stahl (EN 10205).
Produits plats laminés à froid, en acier doux pour emboutissage au pliage à froid - Conditions techniques de livraison
Lire le deuxième alinéa comme suit: Elle n'est pas applicable aux feuillards (largeur de laminage < 600 mm) laminés à froid ni aux produits plats laminés à froid pour lesquels il existe une norme spécifique, en particulier aux produits suivants: - bandes et tôles magnétiques à grains non orientés laminées à froid (prEN 10106); - bandes semi-finies destinées à la construction des circuits magnétiques (prEN 10126 et prEN 10165); - fer noir laminé à froid, en bobine, destiné à la fabrication de fer blanc ou de fer chromé électrolytique(EN 10205).
Hladno valjani ploščati izdelki iz maloogljičnih jekel za preoblikovanje v hladnem - Tehnični dobavni pogoji
General Information
- Status
- Withdrawn
- Publication Date
- 19-May-1998
- Withdrawal Date
- 05-Dec-2006
- Technical Committee
- ECISS/TC 109 - Coated and uncoated flat products to be used for cold forming
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 06-Dec-2006
- Completion Date
- 06-Dec-2006
Relations
- Effective Date
- 24-Sep-2011
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10130:1991 + A1:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions". This standard covers: The second paragraph should read as follows: It does not apply to cold-rolled narrow strip (rolling width < 600 mm) nor to flat cold-rolled products for which there is a specific standard, in particular the following: - cold-rolled non-grain oriented magnetic steel sheet and strip (prEN 10106), - semi-processed steel strip for the construction of magnetic circuits (prEN 10126 and prEN 10165); - cold-rolled blackplate in coils for the production of tinplate or electrolytic chrome iron (EN 10205).
The second paragraph should read as follows: It does not apply to cold-rolled narrow strip (rolling width < 600 mm) nor to flat cold-rolled products for which there is a specific standard, in particular the following: - cold-rolled non-grain oriented magnetic steel sheet and strip (prEN 10106), - semi-processed steel strip for the construction of magnetic circuits (prEN 10126 and prEN 10165); - cold-rolled blackplate in coils for the production of tinplate or electrolytic chrome iron (EN 10205).
EN 10130:1991 + A1:1998 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10130:1991 + A1:1998 has the following relationships with other standards: It is inter standard links to EN 10130:1991, EN 10130:2006, EN 13008:1999, CR 10313:2000, EN 13007:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10130:1991 + A1:1998 is associated with the following European legislation: Standardization Mandates: M/BC/CEN/86/1. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10130:1991 + A1:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kaltgewalzte Flacherzeugnisse aus weichen Stählen zum Kaltumformen - Technische LieferbedingungenProduits plats laminés a froid, en acier doux pour emboutissage au pliage a froid - Conditions techniques de livraisonCold rolled low carbon steel flat products for cold forming - Technical delivery conditions77.140.50SROL]GHONLFlat steel products and semi-productsICS:Ta slovenski standard je istoveten z:EN 10130:1991 + A1:1998SIST EN 10130 + A1:2000en01-april-2000SIST EN 10130 + A1:2000SLOVENSK
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...