EN 1706:2020
(Main)Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
This document specifies the chemical composition limits for aluminium casting alloys and mechanical properties of separately cast test pieces for these alloys.
Annex C is included as a guide to the selection of alloys for a specific use or process.
This document is intended to be used in conjunction with EN 576, EN 1559-1, EN 1559-4, EN 1676 and EN ISO 8062-3.
Aluminium und Aluminiumlegierungen - Gussstücke - Chemische Zusammensetzung und mechanische Eigenschaften
Dieses Dokument legt die Grenzen der chemischen Zusammensetzung von Aluminiumlegierungen für Gussstücke und die mechanischen Eigenschaften von getrennt gegossenen Probestäben für diese Legierungen fest.
Anhang C wurde als Leitfaden zur Auswahl von Legierungen für eine spezifische Anwendung oder einen spezifischen Prozess aufgenommen.
Dieses Dokument ist in Verbindung mit EN 576, EN 1559-1, EN 1559-4, EN 1676 und EN ISO 8062-3 anzuwenden.
Aluminium et alliages d'aluminium - Pièces moulées - Composition chimique et propriétés mécaniques
Le présent document spécifie les fourchettes de composition chimique des pièces moulées en alliages d’aluminium ainsi que les propriétés mécaniques des éprouvettes coulées à part pour ces alliages.
L’Annexe C est intégrée à titre de guide pour le choix des alliages pour un usage ou un procédé spécifique.
Le présent document est à utiliser conjointement avec les normes EN 576, EN 1559 1, EN 1559 4, EN 1676 et EN ISO 8062 3.
Aluminij in aluminijeve zlitine - Ulitki - Kemična sestava in mehanske lastnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1706:2020
01-junij-2020
Nadomešča:
SIST EN 1706:2010
Aluminij in aluminijeve zlitine - Ulitki - Kemična sestava in mehanske lastnosti
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical
properties
Aluminium und Aluminiumlegierungen - Gussstücke - Chemische Zusammensetzung
und mechanische Eigenschaften
Aluminium et alliages d'aluminium - Pièces moulées - Composition chimique et
propriétés mécaniques
Ta slovenski standard je istoveten z: EN 1706:2020
ICS:
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 1706:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1706:2020
---------------------- Page: 2 ----------------------
SIST EN 1706:2020
EN 1706
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS 77.150.10 Supersedes EN 1706:2010
English Version
Aluminium and aluminium alloys - Castings - Chemical
composition and mechanical properties
Aluminium et alliages d'aluminium - Pièces moulées - Aluminium und Aluminiumlegierungen - Gussstücke -
Composition chimique et propriétés mécaniques Chemische Zusammensetzung und mechanische
Eigenschaften
This European Standard was approved by CEN on 2 March 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1706:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1706:2020
EN 1706:2020 (E)
Contents Page
European foreword . 3
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Ordering information . 8
5 Designation systems . 8
5.1 Numerical designation system . 8
5.2 Chemical symbol based designation system . 8
5.3 Temper designations . 8
5.4 Casting process designations . 9
5.5 Designations to be included in drawings . 9
6 Chemical composition . 9
6.1 General . 9
6.2 Samples for chemical analysis .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.