EN 10106:1995
(Main)Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state
Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state
This European Standard defines the grades of cold-rolled non-oriented electrical steel sheet and strip in nominal thicknesses of 0,35mm, 0,50mm,0,65 mm and 1,00mm. In particular, it specifies general requirements, the magnetic properties, geometric characteristics and tolerances, technological characteristics as well as the inspection procedure. This European Standard applies to materials supplied in the fully annealed condition intended for the construction of magnetic circuits. It does not apply to semi-processed material. These magnetic materials correspond to Clause C21 of IEC 404-1.
Kaltgewalztes nichtkornorientiertes Elektroblech und -band im schlußgeglühten Zustand
Die vorliegende Europäische Norm gilt für kaltgewalztes nichtkornorientiertes Elektroblech und -band der Nenndicken 0,35mm, 0,50mm, 0,65mm und 1,00mm; sie enthält die allgemeinen Anforderungen, die magnetischen Eigenschaften, die geometrischen Eigenschaften und Toleranzen, die technologichen Eigenschaften sowie die Prüfbedingungen. Diese Europäische Norm gilt für Erzeugnisse im schlußgeglühten Zustand, die für den Bau magnetischer Kreise bestimmt sind. Sie gilt nicht für Erzeugnisse im halbfertigen, nicht schlußgeglühten Zustand.
Tôles magnétiques à grains non orientés laminées à froid et livrées à l'état fini
La présente norme européenne a pour objet de définir les qualités de tôles magnétiques en acier à grains non orientés de 0,35mm, 0,50mm, 0,65mm et 1,00mm d'épaisseur. Elle donne en particulier les prescriptions générales, les caractéristiques, les caractéristiques géométriques et les tolérances, les caractéristiques technologiques ainsi que les conditions de réception. Elle est applicable aux produits livrés après recuit final destinés à la construction de circuits magnétiques. Elle ne s'applique pas aux produits semi-finis.
Hladno valjana neorientirana elektropločevina in trakovi
General Information
- Status
- Withdrawn
- Publication Date
- 12-Dec-1995
- Withdrawal Date
- 04-Sep-2007
- Technical Committee
- ECISS/TC 108 - Steel sheet and strip for electrical applications
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 05-Sep-2007
- Completion Date
- 05-Sep-2007
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10106:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state". This standard covers: This European Standard defines the grades of cold-rolled non-oriented electrical steel sheet and strip in nominal thicknesses of 0,35mm, 0,50mm,0,65 mm and 1,00mm. In particular, it specifies general requirements, the magnetic properties, geometric characteristics and tolerances, technological characteristics as well as the inspection procedure. This European Standard applies to materials supplied in the fully annealed condition intended for the construction of magnetic circuits. It does not apply to semi-processed material. These magnetic materials correspond to Clause C21 of IEC 404-1.
This European Standard defines the grades of cold-rolled non-oriented electrical steel sheet and strip in nominal thicknesses of 0,35mm, 0,50mm,0,65 mm and 1,00mm. In particular, it specifies general requirements, the magnetic properties, geometric characteristics and tolerances, technological characteristics as well as the inspection procedure. This European Standard applies to materials supplied in the fully annealed condition intended for the construction of magnetic circuits. It does not apply to semi-processed material. These magnetic materials correspond to Clause C21 of IEC 404-1.
EN 10106:1995 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10106:1995 has the following relationships with other standards: It is inter standard links to EN 10106:2007, CR 10313:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10106:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-1997
+ODGQRYDOMDQDQHRULHQWLUDQDHOHNWURSORþHYLQDLQWUDNRYL
Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed
state
Kaltgewalztes nichtkornorientiertes Elektroblech und -band im schlußgeglühten Zustand
Tôles magnétiques a grains non orientés laminées a froid e
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...