EN 755-2:1997
(Main)Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
This part of EN 755 specifies the mechanical property limits applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile. Temper designations are defined in EN 515. The numerical designation system of alloys is specified in EN 573-1. The chemical symbol based designation system is specified in EN 573-2. The chemical composition limits for these materials are given in EN 573-3. Mechanical property limits are specified for all Class "A" alloys as defined in EN 573-4.
Aluminium und Aluminiumlegierungen - Stranggepreßte Stangen, Rohre und Profile - Teil 2: Mechanische Eigenschaften
DIeser Teil der EN 754 legt die Grenzwerte für die mechanischen Eigenschaften von gezogenen Stangen und Rohren aus Aluminium und Alumium-Knetlegierungen fest.Die Bezeichnungen der Werkstoffzustände sind in EN 515 definiert. Das nume- rische Bezeichnungssystem der Werkstoffe in EN 573-1 und das Bezeichnungssystem mit chemischen Symbolen ist in EN 573-2 festgelegt. In der EN 573-3 sind der chemischen Zusammensetzung für diese Werkstoffe angegeben. Die Grenzwerte der mechanischen Eigenschaften sind für alle Werkstoffe der Klasse A festgelegt, wie in EN 573-4 definiert.
Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 2: Caractéristiques mécaniques
La présente partie de l'EN 754 spécifie les limites de caractéristiques mécaniques applicables aux barres et tubes étirés en aluminium et alliages d'aluminium corroyés. La désignation des états métallurgiques est définie dans l'EN 515. Le système de désignation numérique des alliages est spécifié dans t l'EN 573-1. Le système de désignation fondé sur les symboles chimiques est spé- cifié dans l'EN 573-2. Les limites de composition chimique de ces matériaux sontdonnées dans l'EN 573-3. Les limites de caractéristiques mécaniques sont spéci- fiées pour tous les alliages de la "Classe A" telle que définie dans l'EN 573-4.
Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 2. del: Mehanske lastnosti
General Information
- Status
- Withdrawn
- Publication Date
- 22-Apr-1997
- Withdrawal Date
- 18-Mar-2008
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 5 - Extruded and drawn products
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 19-Mar-2008
- Completion Date
- 19-Mar-2008
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Referred By
EN 1999-1-1:2007 - Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules - Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 755-2:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties". This standard covers: This part of EN 755 specifies the mechanical property limits applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile. Temper designations are defined in EN 515. The numerical designation system of alloys is specified in EN 573-1. The chemical symbol based designation system is specified in EN 573-2. The chemical composition limits for these materials are given in EN 573-3. Mechanical property limits are specified for all Class "A" alloys as defined in EN 573-4.
This part of EN 755 specifies the mechanical property limits applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile. Temper designations are defined in EN 515. The numerical designation system of alloys is specified in EN 573-1. The chemical symbol based designation system is specified in EN 573-2. The chemical composition limits for these materials are given in EN 573-3. Mechanical property limits are specified for all Class "A" alloys as defined in EN 573-4.
EN 755-2:1997 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 755-2:1997 has the following relationships with other standards: It is inter standard links to EN 755-2:2008, EN 1999-1-1:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 755-2:1997 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 755-2:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 2. del:
Mehanske lastnosti
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2:
Mechanical properties
Aluminium und Aluminiumlegierungen - Stranggepreßte Stangen, Rohre und Profile -
Teil 2: Mechanische Eigenschaften
Aluminium et
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...