EN 13141-8:2006

SLOVENSKI STANDARD
01-junij-2006
3UH]UDþHYDQMHVWDYE3UHVNXãDQMHODVWQRVWLNRPSRQHQWSURL]YRGRY]D
SUH]UDþHYDQMHVWDQRYDQMGHO3UHVNXãDQMHODVWQRVWLPHKDQVNLKEUH]NDQDOQLK
GRYRGQLKLQRGYRGQLKSUH]UDþHYDOQLKHQRWYNOMXþQR]YUDþDQMHPWRSORWH]D
PHKDQVNHSUH]UDþHYDOQHVLVWHPH]DPHKDQVNRSUH]UDþHYDQMHSRVDPH]QLK
SURVWRURY
Ventilation for buildings - Performance testing of components/products for residential
ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust
ventilation units (including heat recovery) for mechanical ventilation systems intended for
a single room
Lüftung von Gebäuden - Leistungsprüfung von Bauteilen/Produkten für die Lüftung von
Wohnungen - Teil 8: Leistungsprüfung von mechanischen Zuluft- und Ablufteinheiten
ohne Luftführung (einschließlich Wärmerückgewinnung) für ventilatorgestützte
Lüftungsanlagen von einzelnen Räumen
Ventilation des bâtiments - Essais des performances des composants/produits pour la
ventilation des logements - Partie 8 : Essais des performances des bouches de soufflage
et d'extraction (y compris la récupération de chaleur) pour les systemes de ventilation
mécaniques non raccordés prévus pour une piece
Ta slovenski standard je istoveten z: EN 13141-8:2006
ICS:
91.140.30 3UH]UDþHYDOQLLQNOLPDWVNL Ventilation and air-
VLVWHPL conditioning
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 13141-8
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 91.140.30
English Version
Ventilation for buildings - Performance testing of
components/products for residential ventilation - Part 8:
Performance testing of un-ducted mechanical supply and
exhaust ventilation units (including heat recovery) for
mechanical ventilation systems intended for a single room
Ventilation des bâtiments - Essais des performances des Lüftung von Gebäuden - Leistungsprüfung von
composants/produits pour la ventilation des logements - Bauteilen/Produkten für die Lüftung von Wohnungen - Teil
Partie 8 : Essais des performances des bouches de 8: Leistungsprüfung von mechanischen Zuluft- und
soufflage et d'extraction (y compris la récupération de Ablufteinheiten ohne Luftführung (einschließlich
chaleur) pour les systèmes de ventilation mécaniques non Wärmerückgewinnung) für ventilatorgestützte
raccordés prévus pour une pièce Lüftungsanlagen von einzelnen Räumen
This European Standard was approved by CEN on 20 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13141-8:2006: E
worldwide for CEN national Members.

Contents
Page
Foreword.3
Introduction .5
1 Scope.6
2 Normative references.6
3 Terms, definitions and classification .6
3.1 Terms and definitions .6
3.2 Classification.7
4 Symbols and abbreviations .8
5 Requirements.9
6 Test methods.9
6.1 General.9
6.2 Performance testing of aerodynamic characteristics.9
6.2.1 Leakages and mixing.9
6.2.2 Air flow.10
6.2.3 Filter bypass leakage (not applicable to filter classes G1 to G4) .10
6.3 Performance testing of thermal characteristics .11
6.3.1 Temperature ratios.11
6.3.2 Operation at low outdoor temperatures .11
6.4 Performance testing of acoustic characteristics .11
6.4.1 General.11
6.4.2 Radiative sound power in the indoor or outdoor space.11
6.5 Effective power input .12
7 Test results.12
7.1 Test report.12
7.2 Product specifications.13
7.3 Leakages.13
7.4 Air flow.14
7.5 Effective power input .14
7.6 Temperature ratios.14
7.7 Derived results.15
7.8 Acoustic characteristics.15
Annex A (informative) Test layouts .16
Bibliography .18

Foreword
This European Standard (EN 13141-8:2006) has been prepared by Technical Committee CEN/TC 156 “Ventilation
for buildings”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2006, and conflicting national standards shall be withdrawn at the
latest by September 2006.
The European Standard is one of a series of standards on residential ventilation. The performance characteristics
of the components/products for residential ventilation are given in EN 13142.
The position of this European Standard in the field of standards for the mechanical building services is shown in
Figure 1.
Mechanical building services
Ventilation and air conditioning
Control systems systems Heating systems

Mechanical and Design criteria
Ductwork Air terminal
Air handling natural powered for the indoor System Installation
devices units residential environment performance
ventilation
Components/products Components/products Simplified calculation Design and  Performance testing
for residential ventilation for residential ventilation methods dimensioning for residential
Performance Performance testing for residential for residential ventilation system
characteristics ventilation system ventilation system

Part 1: Externally and internally mounted air transfer devices

Part 2: Exhaust and supply air terminal devices

Part 3: Range hoods for residential use

Part 4: Fans used in residential ventilation systems

Part 5: Cowls and roof outlet terminal devices

Part 6: Exhaust ventilation system packages used in a single dwelling

Part 7: Performance testing and mechanical supply and recovery)

exhaust ventilation units (including heat recovery) for mechanical
ventilation systems intended for single family dwellings

Part 8: Performance testing of un-ducted mechanical supply and
exhaust ventilation units (including heat recovery) for mechanical
ventilation systems intended for a single room
Figure 1 — Position of EN 13141-8 in the field of the mechanical building services

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
Introduction
This European Standard specifies methods for the performance testing of components used in residential
ventilation systems to establish the main characteristics as identified in EN 13142.
Part 1 and Part 2 relate respectively to the externally/internally mounted air transfer devices and the exhaust/supply
air terminal devices, which are used in the residential ventilation.
Part 3 considers performance testing of range hoods for residential use, and is based on an IEC standard.
Part 4 consists in some special measurement conditions for fans to be used in the residential systems, when
applying the general ISO methods (as ISO 5801).
Part 5 gives test methods for cowls and other roof outlets.
Part 6 gives test methods for exhaust ventilation system packages used in a single dwelling.
Part 7 gives test methods for supply and exhaust ventilation unit used in a single dwelling.
Part 8 gives test methods for un-ducted supply and exhaust ventilation unit used in a single room.
The standard incorporates many references to other European and International Standards, especially on
characteristics other than the aerodynamic characteristics, for instance on acoustic characteristics.
In most cases some additional tests or some additional conditions are given for the specific use in residential
ventilation systems.
The standard can be used for the following applications:
 laboratory testing;
 attestation purposes.
1 Scope
This European Standard specifies the laboratory test methods and test requirements for the testing of
aerodynamic, thermal and acoustic performance, and the electrical power of a un-ducted mechanical supply and
exhaust ventilation unit used in a single room.
In general, such a unit contains:
 supply and exhaust air fans;
 air filters;
 air to air heat exchanger for exhaust air heat recovery;
 control system.
Such equipment can be provided in more than one assembly, the separate assemblies of which are designed to be
used together.
This European Standard does not deal with ducted units or units with heat pumps.
Safety requirements are given in EN 60335-2-80.
2 Normative references
The following referenced documents are indispensable for the application of this European Standard. For dated
references, only the edi
...