EN 1036-2:2008
(Main)Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
This European Standard specifies requirements, the evaluation of conformity and the factory production control of flat mirrors from silver-coated float glass for internal use in buildings.
NOTE For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
Glas im Bauwesen - Spiegel aus silberbeschichtetem Floatglas für den Innenbereich - Teil 2: Konformitätsbewertung; Produktnorm
Diese Europäische Norm legt die Anforderungen an flache Spiegel aus silberbeschichtetem Floatglas zur
Anwendung im Innenbereich sowie die Konformitätsbewertung und die werkseigene Produktionskontrolle von
solchen Spiegeln fest.
ANMERKUNG Für Glaserzeugnisse mit elektrischer Verkabelung oder Anschlüssen, wie z. B. Alarm- oder Heizungsanwendungen,
können andere Richtlinien, z. B. die Niederspannungsrichtlinie, gelten.
Verre dans la construction - Miroirs en glace argentée pour l'intérieur - Partie 2: Evaluation de la conformité; norme de produit
La présente Norme européenne spécifie des exigences relatives à l’évaluation de la conformité et au contrôle de la
production en usine des miroirs plats en glace argentée utilisés à l’intérieur des bâtiments.
NOTE Pour les produits verriers équipés d'un câblage ou de branchements électriques pour les besoins d'alarme ou de
chauffage par exemple, d’autres directives, comme par exemple la Directive "Basses tensions", peuvent s’appliquer.
Steklo v gradbeništvu - Ogledala iz stekla s srebrno prevleko za uporabo v notranjosti stavb - 2. del: Ovrednotenje skladnosti/standard za izdelek
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glass in Building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity/Product standardSteklo v gradbeništvu - Ogledala iz stekla s srebrno prevleko za uporabo v notranjosti stavb - 2. del: Ovrednotenje skladnosti/standard za izdelekVerre dans la construction - Miroirs en glace argentée pour l'intérieur - Partie 2: Evaluation de la conformité; norme de produitGlas im Bauwesen - Spiegel aus silberbeschichtetem Floatglas für den Innenbereich - Teil 2: Konformitätsbewertung; ProduktnormTa slovenski standard je istoveten z:EN 1036-2:2008SIST EN 1036-2:2008en,fr,de81.040.20ICS:SLOVENSKI
STANDARDSIST EN 1036-2:200801-maj-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1036-2February 2008ICS 81.040.20 English VersionGlass in building - Mirrors from silver-coated float glass forinternal use - Part 2: Evaluation of conformity; product standardVerre dans la construction - Miroirs en glace argentée pourl'intérieur - Partie 2: Evaluation de la conformité; norme deproduitGlas im Bauwesen - Spiegel aus silberbeschichtetemFloatglas für den Innenbereich - Teil 2:Konformitätsbewertung; ProduktnormThis European Standard was approved by CEN on 29 December 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1036-2:2008: E
Factory Production Control (FPC).17 A.1 Factory Production Control (FPC) requirements.17 A.1.1 General.17 A.1.2 Organisation.17 A.1.3 Control system.17 A.2 Marking.18 A.3 Inspection and testing tables of mirror production.18 A.3.1 Information in Table A.1.18 A.3.2 Production control.19 A.3.3 Product control.19 A.3.4 Use of proxy testing.19 Annex B (informative)
Tests for ensuring conformity during factory production control.22 B.1 Information on ensuring durability conformity.22 B.2 Dip test.22 B.2.1 General.22 B.2.2 Test method.22 B.2.3 Acceptance criteria.22 Annex C (informative)
Provisions for voluntary involvement of third party(ies).23 C.1 General.23
Clauses of this European Standard addressing the provisions of EU Construction Products Directive.24 ZA.1 Scope and relevant characteristics.24 ZA.2 Procedure(s) for the attestation of conformity of mirror products.26 ZA.2.1 System(s) of attestation of conformity.26 ZA.2.2 EC Certificate and Declaration of conformity.29 ZA.3 CE marking and labelling.31 Bibliography.34
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.