iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 40-4:2005/AC:2006

(Corrigendum)

Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns

Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns

TC/CMC - Modification to superseding note on TP and Foreword following BT C033/2006

Lichtmaste - Teil 4: Anforderungen an Lichtmaste aus Stahl- und Spannbeton

Candélabres d'éclairage public - Partie 4: Prescriptions pour les candélabres d'éclairage public en béton armé et en béton précontraint

Drogovi za razsvetljavo - 4. del: Zahteve za drogove za razsvetljavo iz armiranega in prednapetega betona

General Information

Status
Published
Publication Date
19-Sep-2006
ICS
93.080.40 - Street lighting and related equipment
Technical Committee
CEN/TC 50 - Lighting columns and spigots
Drafting Committee
CEN/TC 50 - Lighting columns and spigots
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Sep-2006
Completion Date
20-Sep-2006
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/111 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures
Ref Project
SIST EN 40-4:2006/AC:2006 - Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns

Relations

Corrects
EN 40-4:2005 - Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
Effective Date
22-Dec-2008

Buy Standard

EN 40-4:2006/AC:2006EN 40-4:2006/AC:2006
PreviousNext
Corrigendum
EN 40-4:2006/AC:2006
English, French and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columnsDrogovi za razsvetljavo - 4. del: Zahteve za drogove za razsvetljavo iz armiranega in prednapetega betonaCandélabres d'éclairage public - Partie 4: Prescriptions pour les candélabres d'éclairage public en béton armé et en béton précontraintLichtmaste - Teil 4: Anforderungen an Lichtmaste aus Stahl- und SpannbetonTa slovenski standard je istoveten z:EN 40-4:2005/AC:2006SIST EN 40-4:2006/AC:2006en,fr,de93.080.40Street lighting and related equipment91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:SLOVENSKI
STANDARDSIST EN 40-4:2006/AC:200601-december-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 40-4:2005/ACSeptember 2006Septembre 2006September 2006ICS 93.080.40English versionVersion FrançaiseDeutsche FassungLighting columns - Part 4: Requirements for reinforced and prestressedconcrete lighting columnsCandélabres d'éclairage public - Partie 4:Prescriptions pour les candélabresd'éclairage public en béton armé et enbéton précontraintLichtmaste - Teil 4: Anforderungen anLichtmaste aus Stahl- und SpannbetonThis corrigendum becomes effective on 20 September 2006 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 20 septembre
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 40-3-1:2013(Main)
Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads
SIST EN 40-3-1:2013

This European Standard specifies design loads for lighting columns. It applies to lighting columns of nominal height (including any bracket) not exceeding 20 m. Special structural designs to permit the attachment of signs, overhead wires, etc. are not covered by this European Standard.
The requirements for lighting columns made from materials other than concrete, steel, aluminium or fibre reinforced polymer composite (for example wood, plastic and cast iron) are not specifically covered in this standard. Fibre reinforced polymer composite lighting columns are covered in this document, in conjunction with Annex B of EN 40-7:2002.
This European Standard includes performance requirements for horizontal loads due to wind. Passive safety and the behaviour of a lighting column under the impact of a vehicle are not addressed. Such lighting columns will have additional requirements (see EN 12767).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 40-3-2:2013(Main)
Lighting columns - Part 3-2: Design and verification - Verification by testing
SIST EN 40-3-2:2013

This European Standard specifies the requirements for the verification of the design of steel, aluminium, concrete and fibre reinforced polymer composite lighting columns by testing. It gives type tests and so does not cover testing for quality control purposes. It applies to lighting columns of nominal height (including any bracket) not exceeding 20 m. Special structural designs to permit the attachment of signs, overhead wires, etc. are not covered by this European Standard.
This European Standard includes a simplified method for testing steel and aluminium lighting columns. Refer to EN 40-4 for concrete lighting columns and to EN 40-7 for fibre reinforced polymer composite lighting columns.
NOTE   For a more detailed test procedure, refer to Annex D of EN 1990:2002.
The requirements for lighting columns made from materials other than concrete, steel, aluminium or fibre reinforced polymer composite (for example wood, plastic and cast iron) are not specifically covered in this European Standard.
This European Standard includes performance requirements for horizontal loads due to wind. Passive safety and the behaviour of a lighting column under the impact of a vehicle are not addressed. Such lighting columns will have additional requirements (see EN 12767).

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 40-3-3:2013(Main)
Lighting columns - Part 3-3: Design and verification - Verification by calculation
SIST EN 40-3-3:2013

This European Standard specifies the requirements for the verification of the design of lighting columns by calculation. It applies to lighting columns of nominal height (including any bracket) not exceeding 20 m. Special structural designs to permit the attachment of signs, overhead wires, etc. are not covered by this European Standard.
The requirements for lighting columns made from materials other than concrete, steel, aluminium or fibre reinforced polymer composite (for example wood, plastic and cast iron) are not specifically covered in this standard. Fibre reinforced polymer composite lighting columns are covered in this standard in conjunction with EN 40-7.
This European Standard includes performance requirements for horizontal loads due to wind. Passive safety and the behaviour of a lighting column under the impact of a vehicle are not addressed. Such lighting columns will have additional requirements (see EN 12767).
The calculations used in this European Standard are based on limit state principles, where the effects of factored loads are compared with the relevant resistance of the structure. Two limit states are considered:
a)   the ultimate limit state, which corresponds to the load-carrying capacity of the lighting column;
b)   the serviceability limit state, which relates to the deflection of the lighting column in service.
NOTE   In following this approach, simplifications appropriate to lighting columns have been adopted, These are:
1)   the calculations are applicable to circular and regular octagonal cross-sections;
2)   the number of separate partial safety factors have been reduced to a minimum;
3)   serviceability partial safety factors have a value equal to unity.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 40-4:2005(Main)
Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
SIST EN 40-4:2006

This European Standard specifies requirements for reinforced and prestressed concrete lighting columns.  It applies to columns not exceeding 20 m height for post top lanterns and columns with brackets not exceeding 18 m height for side entry lanterns.
This European Standard specifies:
a)   performance related to the essential requirement of resistance to horizontal (wind) loads, measured in accordance with EN 40-3;
b)   performance under vehicle impact (passive safety) in support of the Essential Requirement No. 4 Safety in use, measured in accordance with the corresponding test methods included in this document or available in separate European Standards.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 40-2:2004(Main)
Lighting columns - Part 2: General requirements and dimensions
SIST EN 40-2:2005

This document specifies the requirements and dimensions for lighting columns, brackets, base compartments, cableways and earthing terminals. It applies to post top columns not exceeding 20 m height for post top lanterns and columns with brackets not exceeding 18 m height for side entry lanterns.
This Part does not attempt to restrict the actual appearance or shape of the column or bracket. The majority of lighting columns are normally of a stepped tubular, round, octagonal or polygonal cross-section. Lighting columns may be manufactured from materials other than those listed in the foreword (e.g. wood, plastic, cast iron) or in other forms (e.g. lattice and telescopic).
This document specifies performance related to the essential requirements of resistance to horizontal (wind) loads and performance under vehicle impact (passive safety) in support of the Essential Requirement No 4 Safety in use measured according to the corresponding test methods included in this document or available in separate documents.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 40-7:2002(Main)
Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns
SIST EN 40-7:2003

This Part of EN 40 specifies the performance requirements for fibre reinforced polymer composite lighting columns for which the main intended use is road lighting. It includes materials and test methods. The composite materials considered are those constructed from a fibrous reinforcing material that is suspended in a matrix of resin material. It applies to post top columns not exceeding 20 m height for post top lanterns and columns with brackets not exceeding 18 m height for side entry lanterns.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 40-6:2002(Main)
Lighting columns - Part 6: Requirements for aluminium lighting columns
SIST EN 40-6:2002

This European Standard specifies requirements for aluminium lighting columns. It includes materials and conformity control. It applies to post top columns not exceeding 20 m height for post top lanterns and to columns with brackets not exceeding 18 m height for side entry lanterns.
This European Standard specifies performance related to the essential requirements of resistance to horizontal (wind) loads and performance under impact in support of the Essential Requirement No 4 Safety in use measured according to the corresponding test methods included in this European Standard or available in separate European Standards.
It provides for the evaluation of conformity of the products to this European Standard.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 40-5:2002(Main)
Lighting columns - Part 5: Requirements for steel lighting columns
SIST EN 40-5:2002

This European Standard specifies requirements for steel lighting columns. It includes materials and conformity control. It applies to post top columns not exceeding 20 m height for post top lanterns and to columns with brackets not exceeding 18 m height for side entry lanterns.
This European Standard specifies performance related to the essential requirements of resistance to horizontal (wind) loads and performance under impact in support of the Essential Requirement No 4 Safety in use measured according to the corresponding test methods included in this European Standard or available in separate European Standards.
It provides for the evaluation of conformity of the products to this European Standard.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 40-1:1991(Main)
Lighting columns - Part 1: Definitions and terms
SIST EN 40-1:2001

The present European Standard gives definitions and terms in the field of 'lighting columns' (i.e. support intended to hold one or more lanterns consisting of one or more parts: a post, possibly an extension piece and if necessary a bracket. Columns for catenary lighting are not included).

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13032-5:2018(Main)
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 5: Presentation of data for luminaires used for road lighting
SIST EN 13032-5:2019

This document defines the presentation of utilances or utilization factors respectively for luminaires used for road lighting.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day