EN ISO 10318-2:2015/A1:2018

SLOVENSKI STANDARD
01-oktober-2018
Geosintetika - 2. del: Simboli in piktogrami - Dopolnilo 1 (ISO 10318-2:2015/Amd
1:2018)
Geosynthetics - Part 2: Symbols and pictograms - Amendment 1 (ISO 10318-
2:2015/Amd 1:2018)
Geokunststoffe - Teil 2: Symbole und Piktogramme - Änderung 1 (ISO 10318-
2:2015/Amd 1:2018)
Géosynthétiques - Partie 2: Symboles et pictogrammes - Amendement 1 (ISO 10318-
2:2015/Amd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 10318-2:2015/A1:2018
ICS:
01.040.59 Tekstilna in usnjarska Textile and leather
tehnologija (Slovarji) technology (Vocabularies)
01.080.01 *UDILþQLVLPEROLQDVSORãQR Graphical symbols in general
59.080.70 Geotekstilije Geotextiles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10318-2:2015/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2018
EUROPÄISCHE NORM
ICS 01.080.99; 59.080.70
English Version
Geosynthetics - Part 2: Symbols and pictograms -
Amendment 1 (ISO 10318-2:2015/Amd 1:2018)
Géosynthétiques - Partie 2: Symboles et pictogrammes Geokunststoffe - Teil 2: Symbole und Piktogramme -
- Amendement 1 (ISO 10318-2:2015/Amd 1:2018) Änderung 1 (ISO 10318-2:2015/Amd 1:2018)
This amendment A1 modifies the European Standard EN ISO 10318-2:2015; it was approved by CEN on 15 June 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10318-2:2015/A1:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 10318-2:2015/A1:2018) has been prepared by Technical Committee
ISO/TC 221 “Geosynthetics” in collaboration with Technical Committee CEN/TC 189 “Geosynthetics”
the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2019, and conflicting national standards shall
be withdrawn at the latest by January 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10318-2:2015/Amd 1:2018 has been approved by CEN as EN ISO 10318-
2:2015/A1:2018 without any modification.
INTERNATIONAL ISO
STANDARD 10318-2
First edition
2015-04-01
Geosynthetics —
Part 2:
Symbols and pictograms
Géosynthétiques —
Partie 2: Symboles et pictogrammes
Reference number
ISO 10318-2:2015(E)
©
ISO 2015
ISO 10318-2:2015(E)
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved

ISO 10318-2:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Symbols . 1
2.1 Property symbols . 1
2.1.1 Physical properties . 1
2.1.2 Hydraulic properties of GTX and of GTP . 1
2.1.3 Mechanical properties . 1
2.2 Graphical symbols and pictograms .
...