EN 2591-420:2001
(Main)Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories
Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories
This standard specifies a method of determining the mechanical strength of rear accessories used on elements of electrical and optical connection subjected to bending, tensile and torsional forces.
It shall be used together with EN 2591-100.
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 420: Mechanische Festigkeit der rückseitigen Zubehörteile
Diese Norm legt ein Verfahren zum Nachweis der mechanischen Festigkeit der rückseitigen Zubehörteile von elek-trischen und optischen Verbindungselementen fest, die Biege-, Zug- und Verdrehkräften ausgesetzt werden.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 420 : Tenue mécanique des accessoires arrière
La présente norme spécifie une méthode pour déterminer la tenue mécanique des accessoires arrière utilisés sur les organes de connexion électrique et optique soumis aux forces de flexion, traction et torsion.
Elle doit être utilisée conjointement avec EN 2591-100.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessoriesLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 420: Mechanische Festigkeit der rückseitigen ZubehörteileSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 420 : Tenue mécanique des accessoires arriereAerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-420:2001SIST EN 2591-420:2004en01-maj-2004SIST EN 2591-420:2004SLOVENSKI
STANDARD
SIST EN 2591-420:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-420November 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 420: Mechanical strength of rearaccessoriesSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 420: Tenue mécaniquedes accessoires arrièreLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 420:Mechanische Festigkeit der rückseitigen ZubehörteileThis European Standard was approved by CEN on 4 June 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-420:2001 ESIST EN 2591-420:2004
EN 2591-420:2001 (E)2ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by May 2002, and conflicting national standards shall be withdrawn atthe latest by May 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Ita
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.