EN 14423:2013/prA1
(Amendment)Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
This European Standard specifies the design, materials and dimensions of fittings for clamp type coupling assemblies for use with nominal sizes DN 15 to DN 50 steam and hot water hoses. It covers assemblies up to a maximum working pressure of 18 bar ) (corresponding to a saturated steam temperature of 210 °C).
Schlaucharmaturen mit Klemmfassung für Dampf bis 18 bar
Raccords avec colliers de serrage pour tuyaux à vapeur utilisant une pression jusqu'à 18 bar
Cevne armature z objemkami za cevi za paro do 18 bar
General Information
- Status
- Not Published
- Technical Committee
- CEN/TC 218 - Rubber and plastics hoses and hose assemblies
- Drafting Committee
- CEN/TC 218/WG 5 - Couplings and hose fittings
- Current Stage
- 4097 - End of interruption of work - split/merged
- Start Date
- 23-May-2016
- Completion Date
- 14-Apr-2025
Relations
- Effective Date
- 19-Jan-2023
- Effective Date
- 26-Aug-2015
Overview
EN 14423:2013/prA1 is the CEN European standard (draft amendment A1, Jan 2016) covering clamp type coupling assemblies for steam hoses. It specifies the design, materials and dimensions of fittings for clamp couplings used with steam and hot‑water hoses in nominal sizes DN 15 to DN 50, for a maximum working pressure of 18 bar (saturated steam up to 210 °C). The amendment updates design details, material specifications and references to flange standards.
Key topics and technical requirements
- Scope and ratings
- Applicability: clamp type coupling assemblies for steam/hot‑water hoses DN 15–DN 50.
- Maximum working pressure: 18 bar (saturated steam temperature ≈ 210 °C).
- Design and dimensions
- Defines dimensional requirements for fittings and assemblies to ensure interchangeability and safe operation.
- Amendment includes renumbering of figures/tables for clarity (e.g., Figure/Table renames).
- Materials
- Updated material designations in prA1 (e.g., S355J0+N replacing former S355J2G3 references).
- Stainless steel designation updates (e.g., X2CrNiMo17‑12‑2 per EN 10088‑1).
- Clamps, bolts and nuts
- Requirements and references for clamp geometry, bolt and nut selection and assembly integrity are addressed; prA1 modifies related clause/table numbering.
- Tail ends and flanges
- Tail end fittings, weld‑neck collars and loose flanges are specified; material updates and cross‑references to EN 1092‑1 for flanges are included.
- Deleted items
- prA1 removes specific subclauses on hose fittings with coned end and stud end (7.3.6 and 7.3.7).
Applications and who uses this standard
- Primary users:
- Hose and coupling manufacturers designing and producing clamp type coupling assemblies.
- Plant engineers, procurement and specifiers in steam systems, power plants, food processing, chemical and pharmaceutical industries.
- Maintenance and safety engineers responsible for pressure‑rated hose assemblies and replacement parts.
- Testing laboratories and conformity assessment bodies verifying compliance with European requirements.
- Practical benefits:
- Ensures compatibility and interchangeability of fittings.
- Supports safety and pressure integrity for steam and hot‑water hose assemblies.
- Guides material selection to withstand steam temperatures and corrosive environments.
Related standards
- EN 1092‑1 (flanges - referenced for weld‑neck and loose flanges)
- EN 10025‑2 (structural steel material designations)
- EN 10088‑1 (stainless steel material designations)
Keywords: EN 14423, clamp type coupling assemblies, steam hoses, 18 bar, DN 15–DN 50, materials, dimensions, EN 1092‑1, S355J0+N, X2CrNiMo17‑12‑2.
Frequently Asked Questions
EN 14423:2013/prA1 is a draft published by the European Committee for Standardization (CEN). Its full title is "Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar". This standard covers: This European Standard specifies the design, materials and dimensions of fittings for clamp type coupling assemblies for use with nominal sizes DN 15 to DN 50 steam and hot water hoses. It covers assemblies up to a maximum working pressure of 18 bar ) (corresponding to a saturated steam temperature of 210 °C).
This European Standard specifies the design, materials and dimensions of fittings for clamp type coupling assemblies for use with nominal sizes DN 15 to DN 50 steam and hot water hoses. It covers assemblies up to a maximum working pressure of 18 bar ) (corresponding to a saturated steam temperature of 210 °C).
EN 14423:2013/prA1 is classified under the following ICS (International Classification for Standards) categories: 23.040.70 - Hoses and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14423:2013/prA1 has the following relationships with other standards: It is inter standard links to EN 14423:2013+A1:2016, EN 14423:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14423:2013/prA1 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2016
Cevne armature z objemkami za cevi za paro do 18 bar
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18
bar
Schlaucharmaturen mit Klemmfassung für Dampf bis 18 bar
Raccords avec colliers de serrage pour tuyaux à vapeur utilisant une pression jusqu'à 18
bar
Ta slovenski standard je istoveten z: EN 14423:2013/prA1
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 14423:2013
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2016
ICS 23.040.70
English Version
Clamp type coupling assemblies for use with steam hoses
rated for pressures up to 18 bar
Raccords avec colliers de serrage pour tuyaux à vapeur Schlaucharmaturen mit Klemmfassung für Dampf bis
utilisant une pression jusqu'à 18 bar 18 bar
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 218.
This draft amendment A1, if approved, will modify the European Standard EN 14423:2013. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14423:2013/prA1:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Modification to 5.1, Design . 4
2 Deletion of 7.3.6, Hose fittings with coned end .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...