iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14591-4:2007/AC:2008

(Corrigendum)

Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers

Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers

BSI - Translation improvements in 4.2.1 and 7.1
2013: Originator of XML version: first setup pilot of CCMC in 2012

Explosionsschutz in untertägigen Bergwerken - Schutzsysteme - Teil 4: Automatische Explosionslöschanlagen für Teilschnittmaschinen

Protection contre l'explosion dans les mines souterraines - Systèmes de protection - Partie 4: Installation d'extinction automatique d'explosion pour machines à attaque ponctuelle

Preprečevanje eksplozij in zaščita v podzemnih rudnikih - Zaščitni sistemi - 4. del: Avtomatske gasilne naprave za odkopne stroje

General Information

Status
Published
Publication Date
25-Mar-2008
ICS
13.230 - Explosion protection
73.100.99 - Other mining equipment
Technical Committee
CEN/TC 305 - Potentially explosive atmospheres - Explosion prevention and protection
Drafting Committee
CEN/TC 305 - Potentially explosive atmospheres - Explosion prevention and protection
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
26-Mar-2008
Completion Date
26-Mar-2008
Directive
2014/34/EU - Directive 2014/34/EU Of The European Parliament And Of The Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast)
94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
Ref Project
SIST EN 14591-4:2007/AC:2008 - Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers

Relations

Corrects
EN 14591-4:2007 - Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
Effective Date
22-Dec-2008

Buy Standard

EN 14591-4:2007/AC:2008EN 14591-4:2007/AC:2008
PreviousNext
Corrigendum
EN 14591-4:2007/AC:2008
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosionsschutz in untertägigen Bergwerken - Schutzsysteme - Teil 4: Automatische Explosionslöschanlagen für TeilschnittmaschinenProtection contre l'explosion dans les mines souterraines - Systèmes de protection - Partie 4: Installation d'extinction automatique d'explosion pour machines à attaque ponctuelleExplosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers73.020Rudarstvo in kamnolomsko izkopavanjeMining and quarrying13.230Varstvo pred eksplozijoExplosion protection13.220.10Gašenje požaraFire-fightingICS:Ta slovenski standard je istoveten z:EN 14591-4:2007/AC:2008SIST EN 14591-4:2007/AC:2008en01-junij-2008SIST EN 14591-4:2007/AC:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14591-4:2007/ACMarch 2008Mars 2008März 2008ICS 13.230; 73.100.99English versionVersion FrançaiseDeutsche FassungExplosion prevention and protection in underground mines - Protectivesystems - Part 4: Automatic extinguishing systems for road headersProtection contre l'explosion dans les minessouterraines - Systèmes de protection -Partie 4: Installation d'extinctionautomatique d'explosion pour machines àattaque ponctuelleExplosionsschutz in untertägigenBergwerken - Schutzsysteme - Teil 4:Automatische Explosionslöschanlagen fürTeilschnittmaschinenT
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14591-2:2007/AC:2008(Corrigendum)
Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers
SIST EN 14591-2:2007/AC:2009
  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14591-4:2007(Main)
Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
SIST EN 14591-4:2007

This document lays down requirements for automatic explosion extinguishing systems for roadheader
machines (selective cut heading machines) in roadheader drivages where these systems automatically detect
the initial phase of a firedamp explosion which has been initiated by the cutter head of a roadheader machine
and extinguish it at the roadhead in such a way that the roadway drivage team is not put at risk.
This document does not lay down any requirements for the fighting of fires at the roadhead.
The automatic explosion extinguishing system for roadheaders is an autonomous protective system designed
in accordance with Directive 94/9/EC.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14591-2:2007(Main)
Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers
SIST EN 14591-2:2007

This standard specifies the requirements for concentrated and distributed passive water trough barriers, and quick-deploy water trough barriers.
This standard specifies the requirements and test methods for water troughs which are used as components of the "water trough barrier" protective system for underground coal mines.
This standard does not apply to active water trough barriers.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14591-2:2007/AC:2008(Corrigendum)
Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers
SIST EN 14591-2:2007/AC:2009
  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14591-4:2007(Main)
Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
SIST EN 14591-4:2007

This document lays down requirements for automatic explosion extinguishing systems for roadheader
machines (selective cut heading machines) in roadheader drivages where these systems automatically detect
the initial phase of a firedamp explosion which has been initiated by the cutter head of a roadheader machine
and extinguish it at the roadhead in such a way that the roadway drivage team is not put at risk.
This document does not lay down any requirements for the fighting of fires at the roadhead.
The automatic explosion extinguishing system for roadheaders is an autonomous protective system designed
in accordance with Directive 94/9/EC.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14591-2:2007(Main)
Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers
SIST EN 14591-2:2007

This standard specifies the requirements for concentrated and distributed passive water trough barriers, and quick-deploy water trough barriers.
This standard specifies the requirements and test methods for water troughs which are used as components of the "water trough barrier" protective system for underground coal mines.
This standard does not apply to active water trough barriers.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1888-3:2024(Main)
Child care articles - Wheeled child conveyances - Part 3: Pushchairs intended for leisure sport activities
kSIST FprEN 1888-3:2024

This document specifies the safety requirements of pushchairs when used for running/jogging or skating (excluding ice skating), intended for the transport of one or two children up to 15 or 22 kg each.
Pushchairs intended to transport the carer while pushing (e.g. the combination of longboard and stroller) are excluded from the scope of this document.
This document applies in conjunction with and in addition to the European standards EN 1888 1:2018+A1:2022 or EN 1888-2:2018+A1:2022 and it cannot be used separately.
If the product has several functions or can be converted into another function, the relevant European standards apply to it.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15877-1:2024(Main)
Railway applications - Markings of railway vehicles - Part 1: Freight wagons
kSIST FprEN 15877-1:2024

This document specifies the markings on heavy rail freight wagons, or parts of heavy rail freight wagons, relating to their technical, operational and maintenance characteristics. It specifies the characteristics of these markings, the requirements pertaining to their presentation, their shape and position on a rail vehicle and their meaning. Some markings are accompanied with (a) note(s), where appropriate.
Tank manufacturers’ design criteria, test and product specification plates have not been considered in this document as they are specified in EN 12561 1:2011.
Where fully specified in RID [14] dangerous goods markings have not been considered in this document (dimensions, colour, location and form). Where markings are not fully specified in RID they are included in this document.

  • Draft
    126 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2884:2024(Main)
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C
kSIST FprEN 2884:2024

This document specifies the characteristics of screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated.
Classification: 1 100 MPa /315 °C ·

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12159:2024(Main)
Builders hoists for persons and materials with vertically guided cages
kSISTF prEN 12159:2022

1.1   This document specifies power operated temporarily installed builders’ hoists (referred to as “hoists” in this document) intended for use by persons who are permitted to enter sites of engineering and construction, serving landing levels, having a cage:
-   designed for the transportation of persons or of persons and materials;
-   guided;
-   travelling vertically or along a path within 15° max. of the vertical;
-   supported or sustained by rack and pinion;
-   designed with and / or without support from separate structure.
1.2   This document specifies the significant hazards, hazardous situations or hazardous events relevant to the machine as listed in Annex C which arise during the various phases in the life of the machine and describes methods for the elimination or reduction of these hazards when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
1.3   This document does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   electromagnetic compatibility (emission, immunity);
-   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads);
-   the use of combustion engines;
-   the use of remote controls;
-   hazards occurring during manufacture;
-   hazards occurring as a result of mobility;
-   hazards occurring as a result of being erected over a public road;
-   earthquakes;
-   emission of airborne noise;
-   dual (twin) cage hoists;
-   twin masts hoists;
-   combination hoists, e.g. an EN 12159 hoist with an EN 12158-1 hoist;
-   counterweighted hoists, neither by separate counterweight nor counterweighted by another cage.
1.4   This document does not apply to:
-   builders’ hoists for the transport of goods only EN 12158-1:2021 and EN 12158-2:2000+A1:2010;
-   lifts according to EN 81-20:2020, EN 81-3:2000+A1:2008 and EN 81-43:2009;
-   work cages suspended from lifting appliances;
-   work platforms carried on the forks of fork trucks;
-   work platforms according to EN 1495:1997+A2:2009  ;
-   transport platforms according to EN 16719:2018;
-   funiculars;
-   lifts specially designed for military purposes;
-   mine lifts;
-   theatre elevators;
-   hoists with hydraulic drive/braking systems and hydraulic safety devices.
1.5   This document specifies the hoist installation. It includes the base frame and base enclosure but excludes the design of any concrete, hard core, timber or other foundation arrangement. It includes the design of mast ties but excludes the design of anchor bolts to the supporting structure. It includes the landing gates and their frames but excludes the design of any anchorage fixing bolts to the supporting structure.
1.6   This document does not apply to builders’ hoists for persons and material with vertically guided cages which are manufactured before the date of publication of this document by CEN.

  • Draft
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day