Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers

This standard prescribes the requirements and the procedure for approving the quality system implemented by the manufacturer, for manufacturing EN aerospace products. It also provides instructions for verifying that this approved system is maintained. It is applicable whenever referenced.

Luft- und Raumfahrt - Qualitätssicherung - EN-Erzeugnisse der Luft- und Raumfahrt - Anerkennung des Qualitätssicherungssystems der Hersteller

Diese Norm legt die Anforderungen sowie das Verfahren zur Anerkennung des Qualita"tssicherungssystems eines Herstellers fu"r die Fertigung von Erzeugnissennach EN-Normen der Luft- und Raumfahrt fest. Sie entha"lt auch Angaben zur Feststellung der Aufrechterhaltung dieses anerkannten Systems. Sie ist anzuwenden, wenn auf sie Bezug genommen wird.

Série aérospatiale - Assurance qualité - Produits aérospatiaux EN - Agrément du système qualité des fabricants

La présente norme prescrit les exigences et la procédure pour agréer le système qualité mis en place par le fabricant en vue de la fabrication des produits aérospatiaux EN. Elle donne aussi des instructions pour vérifier le maintien du niveau du système agréé. Elle s'applique chaque fois qu'elle est référencée.

Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers

General Information

Status: Withdrawn
Publication Date: 30-Dec-1991
Withdrawal Date: 20-Jan-2026

ICS: 03.100.70 - Management systems
: 03.120.10 - Quality management and quality assurance
: 49.020 - Aircraft and space vehicles in general

Technical Committee: ASD-STAN - Aerospace
Drafting Committee: ASD-STAN/D 1 - General

Current Stage: 9960 - Withdrawal effective - Withdrawal
Start Date: 18-Jun-2014
Completion Date: 21-Jan-2026

Ref Project: SIST EN 2000:2001 - Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers

Relations

Replaced By: EN 9100:2009 - Quality Management Systems - Requirements for Aviation, Space and Defense Organizations
Effective Date: 23-Jul-2014

Replaced By: EN 9133:2004 - Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
Effective Date: 23-Jul-2014

Standard

EN 2000:2001

English language

6 pages

Preview

e-Library read for

AI-Chat

1 day

Create e-Library subscription and get permanent access to the document. Subscriptions are available for: 03 03.100 03.100.70 03.120 03.120.10 49 49.020

Get Certified

Connect with accredited certification bodies for this standard

BSI Group

BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

UKAS United Kingdom Verified

Visit Website

Bureau Veritas

Bureau Veritas is a world leader in laboratory testing, inspection and certification services.

COFRAC France Verified

Visit Website

DNV

DNV is an independent assurance and risk management provider.

NA Norway Verified

Visit Website

Frequently Asked Questions

What is EN 2000:1991?

EN 2000:1991 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers". This standard covers: This standard prescribes the requirements and the procedure for approving the quality system implemented by the manufacturer, for manufacturing EN aerospace products. It also provides instructions for verifying that this approved system is maintained. It is applicable whenever referenced.

What is the scope of EN 2000:1991?

What ICS categories does EN 2000:1991 belong to?

EN 2000:1991 is classified under the following ICS (International Classification for Standards) categories: 03.100.70 - Management systems; 03.120.10 - Quality management and quality assurance; 49.020 - Aircraft and space vehicles in general. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to EN 2000:1991?

EN 2000:1991 has the following relationships with other standards: It is inter standard links to EN 9100:2009, EN 9133:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

How can I access EN 2000:1991?

EN 2000:1991 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)

EN 2000:2001

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturersLuft- und Raumfahrt - Qualitätssicherung - EN-Erzeugnisse der Luft- und Raumfahrt - Anerkennung des Qualitätssicherungssystems der HerstellerSérie aérospatiale - Assurance qualité - Produits aérospatiaux EN - Agrément du systeme qualité des fabricantsAerospace series - Quality assurance
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

CEN

EN 9125:2025(Main)

Aerospace series - Quality management systems - Non-deliverable software requirements

SIST EN 9125:2025

This document specifies the requirements for the effective control of non-deliverable software. This document can be used during the design, development, test, production, release, use, maintenance, and retirement of non-deliverable software. This can include non-deliverable software procured from external suppliers and utilized in the design, production, evaluation, test, acceptance, or calibration of a deliverable product.
This document focuses solely on the unique requirements of the operational processes that pertain to non-deliverable software as identified below:
This document applies to non-deliverable software (including firmware) that affects a deliverable product or service. Following are several applications and supporting examples of non-deliverable software that is within the scope of this document:
—   design and development: modelling, simulation, virtual reality, virtual machine, computer-aided design (CAD), three-dimensional (3D) modelling and analysis tools, software compiler, and code generators;
—   manufacturing: additive manufacturing, computer numerical controlled (CNC) programs, robotics, factory automation, tools that load deliverable software, software used in special process (e.g. heat treat, shot peen, sonic wall inspection), and automated manufacturing software (i.e. pick and place);
—   verification, validation and maintenance: coordinate measuring machine (CMM) programs, hardware or software qualification, code coverage, test scripts, analysis tools, acceptance test, production acceptance, calibration (inspection, test or calibration), simulator, emulator, and software used in post-delivery service provisions.
The following types of software are not within scope of this document:
—   deliverable software (refer to EN 9115);
—   manufacturing and measuring equipment embedded software (e.g. operating system, drivers);
—   enterprise or office software (e.g. MS Office, word processing or spreadsheet applications, Teams, network software, email, employee management system).
Operational processes not covered in this document are addressed by the respective organization’s quality management system (QMS), based on the EN 9100-series (i.e. EN 9100, EN 9110, EN 9120) and/or ISO 9001 standards.

Standard
14 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 9104-1:2023(Main)

Aerospace series - Quality management systems - Part 1: Requirements for Certification of aviation, space, and defense

SIST EN 9104-1:2024

This document defines the industry-accepted requirements for the ICOP scheme, which provides confidence to ASD customers, that organizations with certification of their QMS, issued by accredited CBs, meet applicable AQMS standard requirements. The requirements in this document are applicable to all participants in the ICOP scheme. If there is a conflict between the requirements of this document, and customer or applicable statutory/regulatory requirements, the latter takes precedence.

Standard
50 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 9104-3:2023(Main)

Aerospace series - Quality management systems - Part 3: Requirements for Aviation, Space, and Defence Auditor Training, Development, Competence, and Authentication

SIST EN 9104-3:2024

This document defines the minimum requirements for auditors, CBs, auditor authentication bodies (AABs), training provider approval bodies (TPABs), and training providers (TPs) who participate in the IAQG industry controlled other party (ICOP) scheme. The requirements in this document supplement those defined within the EN 9104-001, EN 9104-002, EN ISO/IEC 17021-1, and EN ISO/IEC 17021-3 standards.
Data protection for the parties subject to this document and other relevant requirements of the ICOP scheme are managed via bi-lateral contracts between the joint controllers of the data.

Standard
28 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 9103:2023(Main)

Aerospace series - Quality management systems - Variation management of key characteristics

SIST EN 9103:2024

1.1   General
This document is primarily intended to apply to new parts and products intended to be produced in an on-going production phase but can also be applied to parts currently in production (e.g., manufacturing, maintenance). This document is applicable to all production processes that influence the variation of KCs, as well as maintenance and service processes in which KCs are identified. It applies to organizations for assemblies and all levels of parts within an assembly, down to the basic materials including castings and forgings, and to organizations that are responsible for producing the design characteristics of the product.
The variation control process begins with product definition, typically stated in the design documentation (e.g., digital model, engineering drawing, specification) which identifies KCs, and leads to a variation management process for those KCs. This process may also be used for producer-identified KCs (e.g., process KCs, additional/substitute product KCs).
Producers and their subcontractors are responsible for flow down of the standard requirements to those external providers, who produce design characteristics and provide production and service provisions, to ensure that KCs conform to the customer’s requirements.
1.2   Purpose
This document is designed to drive the improvement of manufacturing and maintenance processes through adequate planning and effective management of KC variation. This focus is intended to improve uniformity (less variation or minimum variation of product KCs) and acceptance probability of the end-product.
NOTE   Control of a product or process KC per this document does not constitute, nor imply acceptance of the resulting product. If variation management, under this document, is to be part of an acceptance decision, the requirements need to be specified in the applicable product acceptance plan or contract.
1.3   Convention
The following conventions are used in this document:
-   "shall" indicates a requirement;
-   "should" indicates a recommendation;
-   "may" indicates a permission; and
-   "can" indicates a possibility or a capability.

Standard
34 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 9101:2023(Main)

Aerospace series - Quality management systems - Requirements for conducting audits of aviation, space, and defence quality management Systems

SIST EN 9101:2024

1.1   General
This document defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the EN 9100-series standards, the organization’s QMS documentation, and customer and statutory/regulatory requirements.
The requirements in this document are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing, and certification as published by ISO/IEC (i.e. ISO/IEC 17000:2020, ISO/IEC 17021 1). When there is conflict with these standards, the requirements of this document take precedence.
NOTE 1   In this document, the term “EN 9100-series standards” comprises the EN 9100, EN 9110, and EN 9120 standards; developed by the IAQG and published by various national standards bodies.
NOTE 2   In addition to this document, the IAQG publishes deployment support material on the IAQG website (see http://www.iaqg.org) that can be used by audit teams, when executing the audit process.
1.2   Application
This document is intended to be used for audits of EN 9100-series standards by Certification Bodies (CBs) for certification of organizations, under the auspices of the ASD industry certification scheme [also known as the Industry Controlled Other Party (ICOP) scheme]. The ICOP scheme requirements are defined in the EN 9104-series standards (i.e. FprEN 9104-1, prEN 9104-2, EN 9104 3).
NOTE   Relevant parts of this document can also be used by an organization in support of internal audits (1st party) and external audits at suppliers (2nd party).

Standard
30 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 9131:2020(Main)

Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation

SIST EN 9131:2020

1.1 Application
This standard defines the common nonconformity data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract.
Reporting of nonconformity data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.
1.2 Purpose
The process of exchanging, coordinating, and approving nonconformity data via concession or product quality escape varies with the multiple relationships and agreements among all parties concerned. The information provided by this standard forms architecture for submitting and managing data that allows for concise and accurate communication using various documented methods. The main objective of this standard is to provide the definition of a data set that can be integrated into any form of communication (e.g., electronic data interchange, submission of conventional paper forms).

Standard
19 pages
English language
e-Library read for
AI-Chat
1 day

07-Jul-2020
30-Jan-2021
03.100.70
03.120.10
49.020
ASD-STAN

CEN

EN 9115:2018(Main)

Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100)

SIST EN 9115:2018

The requirements of EN 9100 apply with the following clarification for software.
This European standard supplements the EN 9100 standard requirements for deliverable software and
contains quality management system requirements for organizations that design, develop, and/or
produce deliverable software and services for the aviation, space, and defence industry. This includes,
as required, support software that is used in the development and maintenance of deliverable software
and services. The deliverable software may be stand-alone, embedded, mobile application, or loadable
into a target computer
This deliverable software may also be part of services (e.g., cloud environment, web hosted solutions or
platforms).
Where the use of Hardware Description Language (HDL) or high order language is utilized as the design
source of electronic hardware [e.g., Application Specific Integrated Circuit (ASIC), Programmable Logic
Device (PLD)]; the organization and customer, and/or supplier shall agree on the extent of applicability
of this supplement.
NOTE For airborne electronic hardware guidance, see RTCA/DO-254 or EUROCAE ED-80. For operations
requirements, see EN 9100, clause 8.
Where Commercial-Off-The-Shelf (COTS) or non-developmental software is integrated into a
deliverable product, the organization and customer shall agree on the extent of applicability of this
supplement.
For the purposes of this document, the terms “product” and “software product” are considered
synonymous.
For the purposes of this document, the term “services” may be considered a product.

Standard
27 pages
English language
e-Library read for
AI-Chat
1 day

10-Jul-2018
30-Jan-2019
03.100.70
03.120.10
35.080
49.020
ASD-STAN

CEN

EN 9133:2018(Main)

Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products

SIST EN 9133:2018

1.1 General
This document defines a system for the qualification of standard products for aviation, space, and defenc applications. It defines the principles that shall be adhered to when carrying out product qualification; applied in conjunction with the rules and procedures of the CA. The system enables the CA to confirm compliance is achieved and maintained, in accordance with the requirements of its product definition and associated controlling technical specifications by an Original Component Manufacturer (OCM) of standard products.
This document requires an OCM that has been granted product qualification approval to ensure applicable approvals are maintained and renewed in accordance with the CA’s quality system for that qualified product.
OCMs and OCM designated Value Added Distributors (VADs) requesting product qualification to this standard, shall as a prerequisite, maintain EN 9100 standard quality management system certification approval. This certification shall be visible in the Online Aerospace Supplier Information System (OASIS) database.
1.2 Application
The application of this document will be mandated either in the product standard or its controlling technical specifications. When invoked, the OCM wanting to produce aerospace standard products will need to gain qualification approval from an aerospace CA. The processes defined herein will be performed impartially for the benefit of the aerospace industry, by the CA, to ensure continued compliance of standard products to the requirements defined in their controlling technical specifications.
OCMs will need to ensure they allow sufficient lead-time to complete this process to gain product approval from the CA to support/satisfy their customer delivery requirements. Qualified products using this process shall not be supplied or used without qualification approval and a valid Product Qualification Certificate (PQC) being granted.

Standard
29 pages
English language
e-Library read for
AI-Chat
1 day

12-Jun-2018
30-Dec-2018
03.100.70
03.120.10
49.020
ASD-STAN

CEN

EN 9110:2018(Main)

Quality Management Systems - Requirements for Aviation Maintenance Organizations

SIST EN 9110:2018

This document includes EN ISO 9001:2015 quality management system requirements and specifies additional civil and military aviation maintenance and continuing airworthiness industry requirements, definitions and notes.
It is emphasized that the requirements specified in this document are complementary (not alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this document and customer or applicable statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an organization:
a)   needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements; and
b)   aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any organization, regardless of its type or size or the products and services it provides.
NOTE 1   In this International Standard, the terms "product" or "service" only apply to products and services intended for or required by, a customer.
NOTE 2   Statutory and regulatory requirements can be expressed as legal requirements.

Standard
59 pages
English language
e-Library read for
AI-Chat
1 day

29-May-2018
29-Nov-2018
03.100.70
03.120.10
49.020
ASD-STAN

CEN

EN 9100:2018(Main)

Quality Management Systems - Requirements for Aviation, Space and Defence Organizations

SIST EN 9100:2018

This document includes EN ISO 9001:20152 quality management system requirements and
specifies additional aviation, space and defence industry requirements, definitions and notes.
It is emphasized that the requirements specified in this document are complementary
(not alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this document and customer or applicable
statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an
organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer
and applicable statutory and regulatory requirements and
b) aims to enhance customer satisfaction through the effective application of the system, including
processes for improvement of the system and the assurance of conformity to customer and
applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any
organization, regardless of its type or size, or the products and services it provides.
NOTE 1 In this International Standard, the terms “product” or “service” only apply to products and services
intended for, or required by, a customer.
NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements.

Standard
58 pages
English language
e-Library read for
AI-Chat
1 day
Standard
64 pages
German language
e-Library read for
AI-Chat
1 day

29-May-2018
29-Nov-2018
03.100.70
03.120.10
49.020
ASD-STAN

Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers

Luft- und Raumfahrt - Qualitätssicherung - EN-Erzeugnisse der Luft- und Raumfahrt - Anerkennung des Qualitätssicherungssystems der Hersteller

Série aérospatiale - Assurance qualité - Produits aérospatiaux EN - Agrément du système qualité des fabricants

Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers

General Information

Relations

EN 2000:2001

Get Certified

BSI Group

Bureau Veritas

DNV

Frequently Asked Questions

Standards Content (Sample)

Questions, Comments and Discussion

This May Also Interest You