Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts

TC - Improvement of instructions to update CENELEC harmonization documents in line with the CEN rules and corrections in 15.3 b)
2013: Originator of XML version: first setup pilot of CCMC in 2012

Sicherheitsregeln für die Konstruktion und den Einbau von Aufzügen - Teil 3: Elektrisch und hydraulisch betriebene Kleingüteraufzüge

Règles de sécurité pour la construction et l'installation des ascenseurs - Partie 3: Monte-charge électriques et hydrauliques

Varnostna pravila za konstruiranje in vgradnjo dvigal (liftov) - 3. del: Električna in hidravlična mala tovorna dvigala

General Information

Status: Withdrawn
Publication Date: 07-Jul-2009
Withdrawal Date: 20-Jan-2026

ICS: 91.140.90 - Lifts. Escalators

Technical Committee: CEN/TC 10 - Passenger, goods and service lifts
Drafting Committee: CEN/TC 10/WG 1 - Lifts and service lifts

Current Stage: 9960 - Withdrawal effective - Withdrawal
Start Date: 17-Dec-2025
Completion Date: 28-Jan-2026

Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Directive: 98/37/EC - Machinery

Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery

Ref Project: SIST EN 81-3:2001+A1:2008/AC:2009 - Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts

Relations

Corrects: EN 81-3:2000+A1:2008 - Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts
Effective Date: 04-Mar-2009

EN 81-3:2001+A1:2008/AC:2009 - BARVE - Page 3 preview

EN 81-3:2001+A1:2008/AC:2009 - BARVE - Page 1 preview

EN 81-3:2001+A1:2008/AC:2009 - BARVE - Page 2 preview

Corrigendum

EN 81-3:2001+A1:2008/AC:2009 - BARVE

English language

3 pages

Preview

e-Library read for

AI-Chat

1 day

Create e-Library subscription and get permanent access to the document. Subscriptions are available for: 91 91.140 91.140.90

Get Certified

Connect with accredited certification bodies for this standard

ICC Evaluation Service

Nonprofit organization that performs technical evaluations of building products.

ANAB United States Verified

Visit Website

Aboma Certification B.V.

Specialized in construction, metal, and transport sectors.

RVA Netherlands Verified

Visit Website

BBA (British Board of Agrément)

UK construction product certification.

UKAS United Kingdom Verified

Visit Website

Frequently Asked Questions

What is EN 81-3:2000+A1:2008/AC:2009?

EN 81-3:2000+A1:2008/AC:2009 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts". This standard covers: TC - Improvement of instructions to update CENELEC harmonization documents in line with the CEN rules and corrections in 15.3 b) 2013: Originator of XML version: first setup pilot of CCMC in 2012

What is the scope of EN 81-3:2000+A1:2008/AC:2009?

TC - Improvement of instructions to update CENELEC harmonization documents in line with the CEN rules and corrections in 15.3 b) 2013: Originator of XML version: first setup pilot of CCMC in 2012

What ICS categories does EN 81-3:2000+A1:2008/AC:2009 belong to?

EN 81-3:2000+A1:2008/AC:2009 is classified under the following ICS (International Classification for Standards) categories: 91.140.90 - Lifts. Escalators. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to EN 81-3:2000+A1:2008/AC:2009?

EN 81-3:2000+A1:2008/AC:2009 has the following relationships with other standards: It is inter standard links to EN 81-3:2000+A1:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

Is EN 81-3:2000+A1:2008/AC:2009 a harmonized European standard?

EN 81-3:2000+A1:2008/AC:2009 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC, 98/37/EC; Standardization Mandates: M/079, M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

How can I access EN 81-3:2000+A1:2008/AC:2009?

EN 81-3:2000+A1:2008/AC:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)

EN 81-3:2001+A1:2008/AC:2009 -...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheitsregeln für die Konstruktion und den Einbau von Aufzügen - Teil 3: Elektrisch und hydraulisch betriebene KleingüteraufzügeRègles de sécurité pour la construction et l'installation des ascenseurs - Partie 3: Monte-charge électriques et hydrauliquesSafety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts91.140.90Lifts. EscalatorsICS:Ta slovenski standard je istoveten z:EN 81-3:2000+A1:2008/AC:2009SIST EN 81-3:2001+A1:2008/AC:2009en,fr,de01-november-2009SIST EN 81-3:2001+A1:2008/AC:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 81-3:2000+A1:2008/ACJuly 2009Juillet 2009Juli 2009ICS 91.140.90English versionVersion FrançaiseDeutsche FassungSafety rules for the construction and installation of lifts - Part 3: Electric andhydraulic service liftsRègles de sécurité pour la construction etl'installation des ascenseurs - Partie 3:Monte-charge électriques et hydrauliquesSicherheitsregeln für die Konstruktion undden Einbau von Aufzügen - Teil 3:Elektrisch und hydraulisch betriebeneKleingüteraufzügeThis corrigendum becomes effective on 8 July 2009 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 8 juillet 2009 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 8.Juli 2009 zur Einarbeitung in die drei offiziellen Sprachfassungen der EN inKraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du C
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

CEN

EN 81-42:2025(Main)

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 42: Vertical lifting appliances with enclosed carrier intended for use by persons, including persons with disability

SIST EN 81-42:2026

1.1   This document specifies safety requirements for design, construction and manufacturing of permanently installed electrically powered vertical lifting appliances affixed to a building structure intended for use by persons, including persons with disability:
-   travelling vertically between predefined levels along a guided path whose inclination to the vertical does not exceed 15°;
-   supported or sustained by rack and pinion, rope traction drive, noncircular elastomeric-coated suspension means (hereafter called traction belts) traction drive, rope positive drive, chains, timing belts, screw and nut, guided chain or hydraulic jack (direct or indirect);
-   with enclosed wells;
-   with a rated speed not greater than 0,15 m/s;
-   with the carrier completely enclosed;
-   with a temperature in the well and in the machinery spaces between +5 °C and +40 °C.
1.2   This document does not specify additional requirements for:
-   lightning protection;
-   operation subject to ATEX rules;
-   lifting appliances whose primary function is the transportation of goods;
-   earthquakes, flooding;
-   firefighting and evacuation;
-   noise and vibrations;
-   the transport of type-C wheelchairs as defined in EN 12183:2022 and/or EN 12184:2022;
-   vertically sliding doors.
1.3   Components incorporated in a lifting appliance installation are:
a)   designed in accordance with usual engineering practice and calculation codes, taking into account all failure modes;
b)   of sound mechanical and electrical construction;
c)   free of defects.
1.4   This document is not applicable to lifting appliances manufactured before the date of its publication.

Draft
176 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 81-82:2025(Main)

Safety rules for the construction and installation of lifts - Existing lifts - Part 82: Rules for the improvement of the accessibility of existing lifts for persons including persons with disability

SIST EN 81-82:2026

This document provides rules on how to apply EN 81-20:2020 and EN 81-70:2021+A1:2022 to existing lifts to improve their accessibility and usability for persons including persons with disability. It is detailing the general requirement for accessibility as referred to in EN 81-80:2019, Annex A, Table A.1, No. 1.1.
NOTE EN 81-70:2018 referenced in EN 81-80:2019 has been replaced by EN 81-70:2021+A1:2022.
This document applies to permanently installed lifts serving defined landing levels, having a car designed for the transportation of persons or persons and goods.
This document does not cover destination control system.

Standard
33 pages
English language
e-Library read for
AI-Chat
1 day

04-Nov-2025
91.140.90
CEN/TC 10

CEN

EN 81-83:2025(Main)

Safety rules for the construction and installation of lifts - Existing lifts - Part 83: Rules for the improvement of the resistance against vandalism

SIST EN 81-83:2026

This document provides rules on how to apply EN 81-71:2022 to existing lifts to improve their vandal resistance. It is detailing the general requirement for vandal resistance as referred to in EN 81-80:2019, Annex A, Table A.1, No. 1.2.
NOTE EN 81-71:2018 referenced in EN 81-80:2019 has been replaced by EN 81-71:2022 without technical changes. The reference to category 0 has been removed.
This document applies to permanently installed lifts serving defined landing levels, having a car designed for the transportation of persons or persons and goods.

Standard
25 pages
English language
e-Library read for
AI-Chat
1 day

04-Nov-2025
91.140.90
CEN/TC 10

CEN

EN 81-76:2025(Main)

Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 76: Evacuation of persons with disabilities using lifts

SIST EN 81-76:2025

This document specifies the additional requirements to EN 81 20:2020 for new passenger and goods passenger lifts, which can be used to support faster evacuation of persons with disabilities, including in case of fire alarm.
This document does not apply to:
-   lifts for evacuation due to circumstances which introduce other hazards such as explosion threat, chemical or biological attack, flooding, storm damage, or earthquake. In these cases, this document can be used as a basis with further measures as required from risk assessment;
-   the provision of evacuation aids to assist when the evacuation lift is unavailable.
The significant hazards covered by this document are listed in Annex D.
The following significant hazards are out of the scope of this document:
-   fire or smoke in the evacuation lift well, safe areas or machinery spaces;
-   ingress of water to the lift well during evacuation process;
-   insufficient or incorrectly located evacuation lifts;
-   insufficient evacuation capacity;
-   inability of users to understand the use of the lift in evacuation;
-   entrapment in waiting area (safe area) due to absence of lift service or adjacent stairs;
-   structural collapse or failure of building services (including public supply network, lighting, ventilation) before the evacuation using lifts has been completed;
-   presence of harmful gases, potentially explosive atmosphere, extreme climate conditions, transport of dangerous goods;
-   unavailability of the evacuation lift.
This document is not applicable to evacuation lifts manufactured before the date of its publication.

Standard
42 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 81-43:2025(Main)

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes

SIST EN 81-43:2025

1.1   This document specifies the safety requirements for the construction and installation of power operated lifts attached to cranes and intended for access to workplaces on cranes. The lift serves defined landing levels and has a car which is:
a)   designed for the transportation of persons and goods;
b)   guided;
c)   travelling vertically or along a path within 15 degrees maximum from the vertical;
d)   supported by rack and pinion or suspended by steel wire ropes;
e)   travelling with a speed not more than 1,0 m/s for permanent installed lifts and not more than 0,4 m/s for temporarily installed lifts.
1.2   This document identifies hazards as listed in Annex A that arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer.
This document deals with significant hazards, hazardous situations and events relevant to lifts for cranes, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards (see Annex A).
1.3   This document does not specify requirements for:
a)   noise;
b)   lighting;
c)   potentially explosive atmospheres;
NOTE   Directive 2014/34/EU concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this document. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 2014/34/EU.
d)   electromagnetic compatibility (emission, immunity);
e)   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads);
f)   the use of combustion engines;
g)   hydraulic drive units.
1.4   This document is not applicable to:
a)   builders hoists according to EN 12158 1:2021, EN 12158 2:2000+A1:2010 and EN 12159:2012 and transport platforms according to EN 16719:2018;
b)   elevating control stations according to EN 14502 2:2005+A1:2008;
c)   lifts according to EN 81 20:2020.
1.5   This document deals with the complete lift design but excludes the design of the crane. It includes the base frame and base enclosure of the lift but excludes the design of any concrete, hard core, timber or other foundation arrangement. It includes the design of mast ties and the design of anchorage parts between the mast tie and the crane structure. This document also includes the design of the landing gates and their fixings.
1.6   This document does not apply to lifts for cranes manufactured before the date of publication of this document by CEN.

Standard
77 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 81-41:2024(Main)

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility

SIST EN 81-41:2025

1.1   This draft European Standard deals with safety requirements for construction, manufacturing, installation, maintenance and dismantling of electrically powered vertical lifting platforms affixed to a building structure intended for use by persons with impaired mobility:
-   travelling vertically between predefined levels along a guided path whose inclination to the vertical does not exceed 15°;
-   intended for use by persons with or without a wheelchair;
-   supported or sustained by rack and pinion, rope traction drive, noncircular elastomeric-coated steel suspension members (hereafter called flat belt) traction drive, rope positive drive, chains, toothed belts, screw and nut, guided chain, scissors mechanism or hydraulic jack (direct or indirect);
-   with enclosed liftways;
-   with a speed not greater than 0,15 m/s;
-   with platforms where the carrier is not completely enclosed.
1.2   This draft European Standard deals with all significant hazards relevant to lifting platforms, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
1.3   This draft European Standard does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   handling of materials, the nature of which could lead to dangerous situations;
-   vertical lifting platforms whose primary function is the transportation of goods;
-   vertical lifting platforms whose carriers are completely enclosed;
-   vertical lifting platforms prone to vandalism;
-   hazards occurring during manufacture;
-   earthquakes, flooding;
-   firefighting, evacuation and behaviour during a fire;
-   noise and vibrations;
-   the design of concrete, hard core, timber or other foundation or building arrangement;
-   the design of anchorage bolts to the supporting structure;
-   type C wheelchairs as defined in EN 12183 and/or EN 12184.
NOTE   For the actual type of machinery, noise is not considered a significant nor relevant hazard.
1.4   This draft European Standard is not applicable to Vertical Lifting Platforms intended for use by persons with impaired mobility which are manufactured before the date of its publication as an EN.

Standard
111 pages
English language
e-Library read for
AI-Chat
1 day

26-Nov-2024
24-Apr-2022
11.180.10
91.140.90
2006/42/EC
M/396
CEN/TC 10

CEN

EN 81-31:2024(Main)

Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts

SIST EN 81-31:2025

1.1   This document specifies the safety rules for new accessible goods only lifts with traction, positive or hydraulic drive, permanently installed and only used by users (see 3.57), serving fixed and permanent landing levels, having a carrier made of a single load carrying area, designed for the transportation of goods only, moving along a fixed path by rigid guide rails and inclined not more than 15° to the vertical, with rated speed not exceeding 1 m/s.
This document covers accessible goods only lifts with rated load exceeding 300 kg and not intended to transport persons.
1.2   For the purpose of this document, a goods only lift carrier is regarded as accessible where one of the following conditions is satisfied:
a)   floor area of the carrier is greater than 1,0 m2;
b)   depth of the carrier is greater than 1,0 m;
c)   clear height of the carrier is greater than 1,20 m.
In case the carrier is without a roof, it is considered accessible when the clear height of the landing doors is greater than 1,20 m.
1.3   Two types of accessible goods only lifts are addressed:
a)   Type A, where the intended use is bound to the maximum rated speed of 0,30 m/s;
b)   Type B, where the intended use is bound to the maximum rated speed of 1,0 m/s.
1.4   In addition to the requirements of this document, supplementary requirements are to be considered in special cases (operation subject to ATEX rules, operational in ambiental condition not addressed by this standard, seismic conditions, transporting dangerous goods, etc.).
1.5   This document does not cover:
a)   accessible goods only lifts:
1)   with more than one lift machine;
i)   where loading and unloading is automated, or the carrier floor is fitted with mobile devices (e.g. rollers) for loading and unloading purposes;
ii)   intended to carry bulk loads (such as loose sand, gravel, etc.);
iii)   with drive systems other than those stated in 4.8;
b)   lifting tables according to EN 1570-1 and EN 1570-2;
c)   lifting appliances, such as appliances with more than one carrier, skips, goods only lifts for construction sites, for underground applications, mine winding gear, goods only lifts on seagoing vessels and mobile offshore units, construction and maintenance appliances in wind turbines, goods only lifts specially designed and constructed for research purposes for temporary use in laboratories, goods only lifts specially designed and constructed for military or police purposes;
d)   safety during operation of transport, erection, repairs and dismantling of accessible goods only lifts;
e)   the use of translucent material for the walls of the well and machinery spaces, for the carrier with the exception of the landing doors vision panels;
f)   the use of programmable electronic systems in safety related applications for lifts (PESSRAL);
g)   hydraulic lifts where the setting of the pressure relief valve exceeds 50 MPa;
h)   any form of radiation except EMC;
i)   fire propagation;
j)   energy dissipation type buffers;
k)   the possibility of two simultaneous acts of imprudence and/or the abuse of instructions for use.
l)   ambient temperature in the well and machinery spaces lower than +5 °C and higher than +40 °C;
m)   health and safety of animals.
However, this document can usefully be taken as a basis.
Noise and vibrations are not dealt with in this document as they are not considered a significant nor relevant hazard for the actual type of the accessible goods only lifts.
1.6   The requirements of this document are such that the possibility of a failure of an electric safety device or a safety component complying with all the requirements of this document needs not to be taken into consideration.
1.7   This document is not applicable to accessible goods only lifts which were manufactured before the date of its publication as EN.

Standard
195 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 81-44:2024(Main)

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 44: Lifting appliances in wind turbines

SIST EN 81-44:2025

1.1   This document specifies the safety requirements for the construction and installation of power operated lifting appliances installed permanently for indoor or outdoor service in wind turbines and intended for access to workplaces on wind turbines, including rescue and evacuation procedures. A lifting appliance serves defined landing levels and can move persons to working positions where they are carrying out work (which could be from the carrier) and has a carrier which is:
a)   designed for the transportation of persons and goods;
b)   guided;
c)   travelling vertically or along a path within 15° maximum from the vertical;
d)   supported or sustained by rack and pinion or rope traction drive;
e)   travelling with a speed not more than 0,7 m/s;
f)   able to operate in a temperature range between - 25 °C to + 55 °C.
1.2   This document does not cover hazards related to:
a)   noise;
b)   the use of the lifting appliance for erection or dismantling of the wind turbine;
c)   lightning protection;
d)   use in potentially explosive atmospheres;
e)   electromagnetic compatibility (emission, immunity);
f)   transporting of goods outside the carrier;
g)   the use of combustion engines;
h)   hydraulic and pneumatic drive units;
i)   the use of lifting appliances in floating wind turbines;
j)   use during earthquakes.
1.3   This document is not applicable to lifting appliances manufactured before the date of its publication.

Standard
112 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 12159:2024(Main)

Builders hoists for persons and materials with vertically guided cages

SIST EN 12159:2025

1.1   This document specifies power operated temporarily installed builders’ hoists (referred to as “hoists” in this document) intended for use by persons who are permitted to enter sites of engineering and construction, serving landing levels, having a cage:
-   designed for the transportation of persons or of persons and materials;
-   guided;
-   travelling vertically or along a path within 15° max. of the vertical;
-   supported or sustained by rack and pinion;
-   designed with and / or without support from separate structure.
1.2   This document specifies the significant hazards, hazardous situations or hazardous events relevant to the machine as listed in Annex C which arise during the various phases in the life of the machine and describes methods for the elimination or reduction of these hazards when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
1.3   This document does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   electromagnetic compatibility (emission, immunity);
-   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads);
-   the use of combustion engines;
-   the use of remote controls;
-   hazards occurring during manufacture;
-   hazards occurring as a result of mobility;
-   hazards occurring as a result of being erected over a public road;
-   earthquakes;
-   emission of airborne noise;
-   dual (twin) cage hoists;
-   twin masts hoists;
-   combination hoists, e.g. an EN 12159 hoist with an EN 12158-1 hoist;
-   counterweighted hoists, neither by separate counterweight nor counterweighted by another cage.
1.4   This document does not apply to:
-   builders’ hoists for the transport of goods only EN 12158-1:2021 and EN 12158-2:2000+A1:2010;
-   lifts according to EN 81-20:2020, EN 81-3:2000+A1:2008 and EN 81-43:2009;
-   work cages suspended from lifting appliances;
-   work platforms carried on the forks of fork trucks;
-   work platforms according to EN 1495:1997+A2:2009  ;
-   transport platforms according to EN 16719:2018;
-   funiculars;
-   lifts specially designed for military purposes;
-   mine lifts;
-   theatre elevators;
-   hoists with hydraulic drive/braking systems and hydraulic safety devices.
1.5   This document specifies the hoist installation. It includes the base frame and base enclosure but excludes the design of any concrete, hard core, timber or other foundation arrangement. It includes the design of mast ties but excludes the design of anchor bolts to the supporting structure. It includes the landing gates and their frames but excludes the design of any anchorage fixing bolts to the supporting structure.
1.6   This document does not apply to builders’ hoists for persons and material with vertically guided cages which are manufactured before the date of publication of this document by CEN.