EN 4474:2009

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Premazi, pigmentirani z aluminijem - Premazna metodaLuft- und Raumfahrt - Aluminium pigmenttete Beschichtungen - BeschichtungsverfahrenSérie aérospatiale - Revêtements alumino-organiques - Méthode d'applicationAerospace series - Aluminium pigmented coatings - Coating methods49.040Prevleke in z njimi povezani postopki, ki se uporabljajo v letalski in vesoljski industrijiCoatings and related processes used in aerospace industry49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 4474:2009SIST EN 4474:2009en,de01-oktober-2009SIST EN 4474:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4474July 2009ICS 49.040 English VersionAerospace series - Aluminium pigmented coatings - CoatingmethodsSérie aérospatiale - Revêtements alumino-organiques -Méthode d'applicationLuft- und Raumfahrt - AluminiumpigmentierteBeschichtungen - BeschichtungsverfahrenThis European Standard was approved by CEN on 27 May 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4474:2009: ESIST EN 4474:2009

Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999). ISO 2859-1, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. ISO 8080, Aerospace — Anodic treatment of titanium and titanium alloys — Sulphuric acid process.
1) Published as ASD Pre-standard at the date of publication of this standar
...