iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 867-3:1997/AC:1998

(Corrigendum)

Non-biological systems for use in sterilizers - Part 3: Specification for Class B indicators for use in the Bowie and Dick test

Non-biological systems for use in sterilizers - Part 3: Specification for Class B indicators for use in the Bowie and Dick test

TC - Wrong translation of a clause

Nichtbiologische Systeme für den Gebrauch in Sterilisatoren - Teil 3: Festlegungen für Indikatoren der Klasse B für den Bowie-Dick-Test

Systèmes non-biologiques destinés à être utilisés dans des stérilisateurs - Partie 3: Spécification pour les indicateurs de la Classe B destinés à être utilisés dans l'essai de Bowie-Dick

Nebiološki sistemi za uporabo v sterilizatorjih - 3. del: Specifikacija za indikatorje razreda B za uporabo v Bowie-Dickovem preskusu

General Information

Status
Withdrawn
Publication Date
20-May-1998
Withdrawal Date
14-Mar-2007
ICS
11.080 - Sterilization and disinfection
Technical Committee
CEN/TC 102 - Sterilizers for medical purposes
Drafting Committee
CEN/TC 102/WG 7 - Biological and chemical indicators
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Mar-2007
Completion Date
15-Mar-2007
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
SIST EN 867-3:2000/AC:2000 - Non-biological systems for use in sterilizers - Part 3: Specification for Class B indicators for use in the Bowie and Dick test

Relations

Corrects
EN 867-3:1997 - Non-biological systems for use in sterilizers - Part 3: Specification for Class B indicators for use in the Bowie and Dick test
Effective Date
22-Dec-2008
Replaced By
EN ISO 11140-3:2007 - Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007)
Effective Date
22-Dec-2008

Buy Standard

EN 867-3:2000/AC:2000EN 867-3:2000/AC:2000
PreviousNext
Corrigendum
EN 867-3:2000/AC:2000
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nebiološki sistemi za uporabo v sterilizatorjih - 3. del: Specifikacija za indikatorje razreda B za uporabo v Bowie-Dickovem preskusuNichtbiologische Systeme für den Gebrauch in Sterilisatoren - Teil 3: Festlegungen für Indikatoren der Klasse B für den Bowie-Dick-TestSystemes non-biologiques destinés a etre utilisés dans des stérilisateurs - Partie 3: Spécification pour les indic
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1422:2014(Main)
Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods
SIST EN 1422:2014

This European Standard specifies the requirements and the relevant tests for automatically controlled sterilizers employing ethylene oxide (EO) gas as the sterilant, either as a pure gas or a mixture with other gases, being used for the sterilization of medical devices and their accessories.
This European Standard specifies requirements for ethylene oxide sterilizers (EO-sterilizers) working at super or sub-atmospheric pressure for:
- the performance and design of sterilizers to ensure that the process is capable of sterilizing medical devices;
- the equipment and controls of these sterilizers necessary for the validation and routine control of the sterilization processes.
The test loads described in this European Standard are selected to represent a number of loads for the evaluation of the performance of EO sterilizers for medical devices. However, specific loads may require the use of other test loads.
This European Standard does not specify those tests which are necessary to determine the probability of a processed product being sterile, nor the routine quality control tests required prior to release of sterile product. These topics are addressed in prEN ISO 11135:2012.
This European Standard does not specify requirements for occupational safety associated with the design and operation of EO sterilization facilities.
NOTE 1   For further information on safety, see examples in the Bibliography. National or regional regulations can exist.
This European Standard does not cover sterilizers which employ the injection of EO or mixtures containing EO directly into packages or into a flexible chamber.
NOTE 2   See EN ISO 14937.
This European Standard is not intended as a checklist for suitability of an existing EO sterilizer when assessing compliance with prEN ISO 11135:2012. This standard is not intended to be applied retrospectively.
This European Standard does not cover analytical methods for determining levels of residual EO and/or its reaction products.
NOTE 3   For further information see ISO 10993 7.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1422:1997/prA1(Amendment)
Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods
SIST EN 1422:2000/kprA1:2009
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1422:2014(Main)
Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods
SIST EN 1422:2014

This European Standard specifies the requirements and the relevant tests for automatically controlled sterilizers employing ethylene oxide (EO) gas as the sterilant, either as a pure gas or a mixture with other gases, being used for the sterilization of medical devices and their accessories.
This European Standard specifies requirements for ethylene oxide sterilizers (EO-sterilizers) working at super or sub-atmospheric pressure for:
- the performance and design of sterilizers to ensure that the process is capable of sterilizing medical devices;
- the equipment and controls of these sterilizers necessary for the validation and routine control of the sterilization processes.
The test loads described in this European Standard are selected to represent a number of loads for the evaluation of the performance of EO sterilizers for medical devices. However, specific loads may require the use of other test loads.
This European Standard does not specify those tests which are necessary to determine the probability of a processed product being sterile, nor the routine quality control tests required prior to release of sterile product. These topics are addressed in prEN ISO 11135:2012.
This European Standard does not specify requirements for occupational safety associated with the design and operation of EO sterilization facilities.
NOTE 1   For further information on safety, see examples in the Bibliography. National or regional regulations can exist.
This European Standard does not cover sterilizers which employ the injection of EO or mixtures containing EO directly into packages or into a flexible chamber.
NOTE 2   See EN ISO 14937.
This European Standard is not intended as a checklist for suitability of an existing EO sterilizer when assessing compliance with prEN ISO 11135:2012. This standard is not intended to be applied retrospectively.
This European Standard does not cover analytical methods for determining levels of residual EO and/or its reaction products.
NOTE 3   For further information see ISO 10993 7.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1500:2013(Main)
Chemical disinfectants and antiseptics - Hygienic handrub - Test method and requirements (phase 2/step 2)
SIST EN 1500:2013

This European Standard specifies a test method simulating practical conditions for establishing whether a product for hygienic handrub reduces the release of transient microbial flora on hands when rubbed onto the artificially contaminated hands of volunteers.
NOTE 1   Attention is drawn to the fact that tests on human volunteers are the subject of legal provisions in certain European countries/regions.
This European Standard applies to products for hygienic handrub for use in areas and situations where disinfection is medically indicated. Such indications occur in patient care, for example:
- in hospitals, in community medical facilities and in dental institutions,
- in clinics of schools, of kindergartens and of nursing homes;
and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patient.
EN 14885 specifies in detail the relationship of the various tests to one another and to "use recommendations".
NOTE 2   This method corresponds to a phase 2, step 2 test.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1499:2013(Main)
Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2)
SIST EN 1499:2013

This European Standard specifies a test method simulating practical conditions for establishing whether a product for hygienic handwash reduces the release of transient microbial flora on hands when used to wash the artificially contaminated hands of volunteers.
NOTE 1   Attention is drawn to the fact that tests on human volunteers are the subject of legal provisions in certain European countries/regions.
This European Standard applies to products for hygienic handwash for use in areas and situations where disinfection is medically indicated. Such indications occur in patient care, for example:
- in hospitals, in community medical facilities and in dental institutions,
- in clinics of schools, of kindergartens and of nursing homes;
and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patient.
EN 14885 specifies in detail the relationship of the various tests to one another and to "use recommendations".
NOTE 2   This method corresponds to a phase 2, step 2 test.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12347:1998(Main)
Biotechnology - Performance criteria for steam sterilizers and autoclaves
SIST EN 12347:1999

This European Standard specifies performance criteria for steam sterilizer and autoclave used for the destruction and prevention of release of microorganisms used in biotechnological processes. This European Standard applies if the intended use of steam sterilizers or autoclaves includes hazardous or potentially hazardous microorganisms used in biotechological processes or if exposure of the worker or the environment to such microorganisms is restricted for reasons of safety.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1422:1997/prA1(Amendment)
Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods
SIST EN 1422:2000/kprA1:2009
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11267:2023(Main)
Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2023)
SIST EN ISO 11267:2023

This document specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Folsomia candida Willem by dermal and alimentary uptake. This document also provides information on how to use this method for testing substances under temperate conditions.
The chronic test described is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation, industrial, agricultural or other sites of concern and waste materials.
The method is not applicable to volatile substances, i.e. substances for which H (Henry's constant) or the air/water partition coefficient is greater than 1, or for which the vapour pressure exceeds 300 Pa at 25 °C.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day