EN 15772:2012

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tekstilne talne obloge - Minimalne zahteve za iglane talne obloge za enkratno uporabo v primerih omejenega trajanjaTextile Bodenbeläge - Mindestanforderungen für Nadelvlies-Bodenbeläge im Fall von Veranstaltungen mit begrenzter DauerRevêtements de sol textiles - Exigences minimales relatives aux revêtements de sol aiguilletés à usage unique pour événements de durée limitéeTextile floor coverings - Minimum requirements for needled floor coverings for single usage in events of limited duration59.080.60Tekstilne talne oblogeTextile floor coveringsICS:Ta slovenski standard je istoveten z:EN 15772:2012SIST EN 15772:2012en,fr,de01-september-2012SIST EN 15772:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15772
June 2012 ICS 59.080.60 English Version
Textile floor coverings - Minimum requirements for needled floor coverings for single usage in events of limited duration
Revêtements de sol textiles - Exigences minimales relatives aux revêtements de sol aiguilletés à usage unique pour événements de durée limitée
Textile Bodenbeläge - Mindestanforderungen für Nadelvlies-Bodenbeläge im Fall von Veranstaltungen mit begrenzter Dauer This European Standard was approved by CEN on 11 May 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15772:2012: ESIST EN 15772:2012

(normative)
Summary test report .9A.1 General .9A.2 List of references to Annex A . 10Bibliography . 15 SIST EN 15772:2012

These floor coverings are intended to be adhered to the substrate. This European Standard is both applicable to needled pile floor coverings for single usage in events of limited duration and needled floor coverings without pile for single usage in events of limited duration. This European Standard is not applicable to tiles. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 984, Textile floor coverings — Determination of the mass per unit area of the use surface of needled floor coverings EN 985:2001, Textile floor coverings — Castor chair test EN 1269, Textile floor coverings — Assessment of impregnations in needled floor coverings by means of a soiling test EN 1318, Textile floor coverings — Determination of the apparent effective thickness of the backing EN 1963, Textile floor coverings — Tests using the Lisson Tretrad Machine CEN/TS 14159, Textile floor coverings — Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat CEN/TS 15398, Resilient, textile and laminate floor coverings — Floor covering standard symbols EN ISO 105-B02, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:1994, including amendment 1:1998) EN ISO 845, Cellular plastics and rubbers — Determination of apparent density (ISO 845) ISO 1765, Machine-made textile floor coverings — Determination of thickness ISO 2424:2007, Textile floor coverings — Vocabulary ISO 2551, Machine-made textile floor coverings — Determination of dimensional changes due to the effects of varied water and heat conditions ISO 6356, Textile floor coverings — Assessment of static electrical propensity — Walking test ISO 8543, Textile floor coverings — Methods for determination of mass ISO 11379, Textile floor coverings — Laboratory cleaning procedure using spray extraction 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 2424:2007 apply. SIST EN 15772:2012

Table 1 — Identification requirements Characteristics Test methods Tolerances Fibre composition of use surface European Directives 96/73/EC, 96/74/EC and 73/44/EEC
Dimensions CEN/TS 14159 CEN/TS 14159 Total thickness mm ISO 1765 Nominal ± 15 % a Total mass per unit area g/m2 ISO 8543 Nominal mass ± 15 % Mass per unit area of the use-surface (for type 2 and type 3 product) g/m2
EN 984
Nominal mass ± 15 % Foam backing (if applicable) ♦ apparent thickness
mm ♦ apparent density
g/cm³
EN 1318 EN ISO 845
Nominal ± 0,5 mm a
For products with total thickness ≤ 3,5 mm: tolerance maximum ± 0,5 mm. 6 Basic requirements Needled floor coverings for single usage in events of limited duration shall conform to the basic requirements specified in Table 2. Table 2 — Basic requirements Characteristics Requirements Test methods Dimensional stability Shrinkage
≤ 1,2 % in either direction
ISO 2551 Extension
≤ 0,5 % in either direction Assessment of impregnations ≥ 2 EN 1269 Colour fastness to light a
≥ 4 EN ISO 105-B02 Hairiness (pilling) ≥ 2,5 b EN 1963 – Test D a Conformity to be declared by the manufacturer for each colour
b Tested production-wise and cross-wise, worst result decisive. SIST EN 15772:2012

(normative)
Summary test report A.1 General Table A.1 — Summary test report Identification, basic information and use classification Name(s) (number) of quality
Date dd.mm.yyyy
Manufacturer/applicant
Type of carpet Type Type of manufacture (table A.2)
Type of surface (table A.3)
Fibre composition (table A.6) of the use-surface mass Pass/fail Secondary backing
(table A.5)
Colouring (table A.7)
Dimensions
Basic requirements according to
Table 2
Pass/fail
Total thickness (mm)
...