EN 13481-2:2012
(Main)Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
This European Standard is applicable to fastening systems, in categories A - E (see EN 13481 1:2012, 3.1), for use on concrete sleepers in ballasted track with maximum axle loads and minimum curve radii in accordance with Table 1.
Table 1 - Fastening category criteria
Category Maximum design axle load
kN Minimum curve radius
m
A 130 40
B 180 80
C 260 150
D 260 400
E 350 150
NOTE The maximum axle load for categories A and B does not apply to maintenance vehicles.
The requirements apply to:
- fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems;
- fastening systems for the rail sections in EN 13674-1 (excluding 49 E4) and EN 13674-4+A1.
This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints.
This standard is for type approval of a complete fastening assembly only.
Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 2: Befestigungssysteme für Betonschwellen
Diese Europäische Norm gilt für Schienenbefestigungssysteme der Kategorien A - E, wie in EN 13481 1:2012, 3.1, festgelegt, auf Betonschwellen im Schotteroberbau mit den maximalen Auslegungsachslasten und Mindest-Gleisbogenhalbmessern nach Tabelle 1.
Tabelle 1 - Befestigungskategorie-Kriterien
Kategorie Maximale Auslegungsachslast
kN Mindest-Gleisbogen-halbmesser
m
A 130 40
B 180 80
C 260 150
D 260 400
E 350 150
ANMERKUNG Die maximalen Auslegungsachslasten der Kategorien A und B gelten nicht für Wartungsfahrzeuge.
Die Anforderungen gelten für:
- Befestigungssysteme, die am Fuß und/oder am Schienensteg wirken, einschließlich ihrer direkten und indirekten Befestigungssysteme;
- Befestigungssysteme für Schienenprofile nach EN 13674-1 (ausgenommen 49 E4) und EN 13674-4.
Diese Norm gilt nicht für Befestigungssysteme für andere Schienenprofile, starre Befestigungssysteme oder spezielle Befestigungssysteme für verschraubte oder geklebte Schienenstöße.
Diese Norm gilt ausschließlich für die Typzulassung des kompletten Schienenbefestigungssystems.
Applications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 2: Systèmes de fixation pour traverses en béton
La présente Norme européenne est applicable aux systèmes de fixation des catégories A à E comem spécifiée dans l’EN 13481 1:2012, 3.1 pour utilisation sur des traverses en béton en voie ballastée avec des charges à l’essieu maximales et des rayons de courbure minimaux selon le Tableau 1.
Les exigences s’appliquent :
- aux systèmes de fixation qui agissent sur le patin et/ou l’âme du rail, y compris les systèmes de fixation directs et les systèmes avec selle ;
- aux systèmes de fixation pour les profils de rail décrits dans l’EN 13674-1 (à l’exclusion du profil 49 E4) et l’EN 13674-4.
La présente norme ne s'applique pas aux systèmes de fixation pour d’autres profils de rail, aux systèmes de fixation rigides, ou aux systèmes de fixation spéciaux utilisés au droit des éclisses.
La présente norme s'applique uniquement à la qualification d’un système de fixation complet.
Železniške naprave - Zgornji ustroj - Zahteve za izdelavo pritrdilnih sistemov - 2. del: Pritrdilni sistemi za betonske prage
Ta evropski standard se uporablja za pritrdilne sisteme v kategorijah od A do E, kot je določeno v točki 3.1 standarda EN 13481-1:2012, za uporabo na betonskih pragih pri zgornjem ustroju s tamponskim slojem z največjo osno obremenitvijo in najmanjšim krivinskim polmerom. Zahteve se nanašajo na: pritrdilne sisteme, ki delujejo na vznožje in/ali stojino tirnice, vključno z neposrednimi pritrdilnimi sistemi in posrednimi pritrdilnimi sistemi; pritrdilne sisteme za dele železnice v standardih EN 13674-1 (brez 49 E4) in EN 13674-4. Ta standard se ne uporablja za pritrdilne sisteme za druge dele železnice, toge pritrdilne sisteme ali posebne pritrdilne sisteme, ki se uporabljajo pri zakovičenih spojih ali zlepljenih spojih. Ta standard se uporablja samo za odobritev tipa celotnega pritrdilnega sestava.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Zahteve za izdelavo pritrdilnih sistemov - 2. del: Pritrdilni sistemi za betonske prageBahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 2: Befestigungssysteme für BetonschwellenApplications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 2: Systèmes de fixation pour traverses en bétonRailway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers93.100Gradnja železnicConstruction of railwaysICS:Ta slovenski standard je istoveten z:EN 13481-2:2012SIST EN 13481-2:2012en,fr,de01-julij-2012SIST EN 13481-2:2012SLOVENSKI
STANDARDSIST EN 13481-2:2004/A1:2007SIST EN 13481-2:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13481-2
May 2012 ICS 93.100 Supersedes EN 13481-2:2002English Version
Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
Applications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 2: Systèmes de fixation pour traverses en béton
Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 2: Befestigungssysteme für Betonschwellen This European Standard was approved by CEN on 27 April 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13481-2:2012: ESIST EN 13481-2:2012
Vertical load test for cast-in and glued-in fastening components . 14A.1 Test procedure . 14A.2 Test report . 15Annex B (informative)
Vibration and noise . 16B.1 General . 16B.2 Symbols . 16B.3 Parameters for environmental vibration calculations . 16B.4 Calculating the vibration attenuation . 17B.5 Environmental noise . 17Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC . 18Bibliography . 21 SIST EN 13481-2:2012
Measurement of torsional resistance is included for use in assessing the risk of track buckling.
Classes for attenuation of dynamic loading are included for use when it it is necessary to protect sleepers from vehicle induced impacts.
The laboratory test for the effect of repeated loading is specified to assess the potential long term performance of the fastening in track.
The test for clamping force is only suitable for laboratory use. SIST EN 13481-2:2012
The requirements apply to: fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems; fastening systems for the rail sections in EN 13674-1 (excluding 49 E4) and EN 13674-4. This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints. This standard is for type approval of a complete fastening assembly only. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13146-1:2012, Railway applications – Track – Test methods for fastening systems – Part 1: Determination of longitudinal rail restraint EN 13146-2:2012, Railway applications – Track – Test methods for fastening systems – Part 2: Determination of torsional resistance EN 13146-3:2012, Railway applications – Track – Test methods for fastening systems – Part 3: Determination of attenuation of impact loads EN 13146-4:2012, Railway applications – Track – Test methods for fastening systems – Part 4: Effect of repeated loading SIST EN 13481-2:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.