prEN 14717
(Main)Welding and allied processes - Environmental check list
Welding and allied processes - Environmental check list
This document provides check lists for the assessment of the environmental aspects of welding fabrication of metallic materials including site and repair work. Informative annexes indicate recommended actions for avoiding and reducing the possible environmental impacts outside the workshop.
Schweißen und verwandte Prozesse - Umweltcheckliste
Dieses Dokument legt Checklisten zum Bewerten von Umweltaspekten bei der Schweißfertigung von metallischen Werkstoffen einschließlich Arbeiten auf Baustellen und Reparatur fest. Die informativen Anhänge enthalten empfohlene Maßnahmen zum Vermeiden und Reduzieren von möglichen Umweltbelastungen außerhalb der Werkstatt.
Soudage et techniques connexes - Liste de vérification relative à l'environnement
Le présent document fournit des listes de vérification pour l’évaluation des aspects environnementaux de la fabrication par soudage faisant intervenir des matériaux métalliques, y compris les travaux sur site et la réparation. Des Annexes informatives indiquent les actions recommandées permettant d’éviter ou de réduire les possibles impacts sur l’environnement en dehors de l’atelier de fabrication.
Varjenje in sorodni postopki - Okoljski kontrolni vprašalnik
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14717:2021
01-marec-2021
Varjenje in sorodni postopki - Kontrolni vprašalnik/seznam v zvezi z okoljem
Welding and allied processes - Environmental check list
Schweißen und verwandte Prozesse - Umweltcheckliste
Soudage et techniques connexes - Liste de vérification relative à l'environnement
Ta slovenski standard je istoveten z: prEN 14717
ICS:
13.020.01 Okolje in varstvo okolja na Environment and
splošno environmental protection in
general
25.160.01 Varjenje, trdo in mehko Welding, brazing and
spajkanje na splošno soldering in general
oSIST prEN 14717:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 14717:2021
---------------------- Page: 2 ----------------------
oSIST prEN 14717:2021
DRAFT
EUROPEAN STANDARD
prEN 14717
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2021
ICS Will supersede EN 14717:2005
English Version
Welding and allied processes - Environmental check list
Soudage et techniques connexes - Liste de vérification Schweißen und verwandte Prozesse -
relative à l'environnement Umweltcheckliste
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 121.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14717:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 14717:2021
prEN 14717:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Procedures. 6
5 Check lists of possible environmental aspects . 7
Annex A (informative) Assessment and recommended actions. 10
Annex B (informative) Requirements . 15
Annex ZA (informative) Relationship between this European Standard and the ecodesign
requirements of Commission Regulation (EU) No 2019/1784 aimed to be covered . 16
Bibliography . 17
2
---------------------- Page: 4 ----------------------
oSIST prEN 1471
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.