EN 10165:1995
(Main)Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state
Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state
This European Standard defines the grades of cold rolled electrical non-orientedalloyed steel sheet and strip delivered in the semi-processed condition, that is without final heat treatment of 0,50mm and 0,65mm nominal thickness. It specifies general requirements, the magnetic properties, the geometric characteristics and tolerances, technological characteristics as well as the inspection procedure. This European Standard applies to material intended for the construction of magnetic circuits. These magnetic materials correspond to Clause C21 of IEC 404-1.
Kaltgewalztes Elektroblech und -band aus legierten Stählen im nicht schlußgeglühten Zustand
Die vorliegende Europäische Norm gilt für kaltgewalztes nichtkornorientiertes Elektroblech und -band aus legierten Stählen im nicht schlußgeglühten Zustandder Nenndicken 0,50mm und 0,65mm. Sie enthält die allgemeinen Anforderungen, die magnetischen Eigenschaften, die geometrischen Eigenschaften und Toleranzen, die technologischen Eigenschaften sowie die Prüfbedingungen. Diese EuropäischeNorm gilt für Erzeugnisse, die für den Bau magnetischer Kreise bestimmt sind. Die Erzeugnisse entsprechen dem Abschnitt C21 der IEC 404-1.
Tôles magnétiques en acier allié laminées à froid et livrées à l'état semi-fini
La présente norme européenne définit les qualités des bandes magnétiques en acier allié à grains non orientés, laminées à froid et livrées à l'état semi- fini, c'est-à-dire sans recuit final de 0,50mm et 0,65mm d'épaisseur ainsi que des feuilles découpées dans les bandes. Elle donne également les prescriptions générales, les caractéristiques magnétiques, les caractéristiques géométriques et tolérances, les caractéristiques technologiques ainsi que les conditions de réception. Elle est applicable aux produits destinés à la construction des circuits magnétiques. Ces produits correspondent à l'article C21 de la CEI 404-1
Hladno valjana legirana elektropločevina in trakovi, dobavljeni v stanju brez zaključnega žarjenja
General Information
- Status
- Withdrawn
- Publication Date
- 12-Dec-1995
- Withdrawal Date
- 30-May-2006
- Technical Committee
- ECISS/TC 108 - Steel sheet and strip for electrical applications
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 31-May-2006
- Completion Date
- 31-May-2006
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10165:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state". This standard covers: This European Standard defines the grades of cold rolled electrical non-orientedalloyed steel sheet and strip delivered in the semi-processed condition, that is without final heat treatment of 0,50mm and 0,65mm nominal thickness. It specifies general requirements, the magnetic properties, the geometric characteristics and tolerances, technological characteristics as well as the inspection procedure. This European Standard applies to material intended for the construction of magnetic circuits. These magnetic materials correspond to Clause C21 of IEC 404-1.
This European Standard defines the grades of cold rolled electrical non-orientedalloyed steel sheet and strip delivered in the semi-processed condition, that is without final heat treatment of 0,50mm and 0,65mm nominal thickness. It specifies general requirements, the magnetic properties, the geometric characteristics and tolerances, technological characteristics as well as the inspection procedure. This European Standard applies to material intended for the construction of magnetic circuits. These magnetic materials correspond to Clause C21 of IEC 404-1.
EN 10165:1995 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10165:1995 has the following relationships with other standards: It is inter standard links to EN 10341:2006, CR 10313:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10165:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kaltgewalztes Elektroblech und -band aus legierten Stählen im nicht schlußgeglühten ZustandTôles magnétiques en acier allié laminées a froid et livrées a l'état semi-finiCold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state77.140.50SROL]GHONLFlat steel products and semi-productsICS:Ta slovenski
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...