EN ISO 15546:2011
(Main)Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011)
Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011)
ISO 15546:2011 specifies the technical delivery conditions, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool joints, for use in drilling and production operations in the petroleum and natural gas industries.
A typical drill pipe configuration is provided, showing main elements and lengths. The main dimensions and masses of the grades of drill pipe are given in both SI units and USC units.
ISO 15546:2011 does not consider performance properties.
Erdöl- und Erdgasindustrie - Bohrrohre aus Aluminiumlegierungen (ISO 15546:2011)
Industries du pétrole et du gaz naturel - Tige de forage en alliage d'aluminium (ISO 15546:2011)
L'ISO 15546:2011 spécifie les conditions techniques de livraison, le procédé de fabrication, les exigences relatives aux matériaux, la configuration et les dimensions, les modes opératoires de vérification et d'inspection pour les tiges de forage en alliage d'aluminium, avec ou sans raccords vissés en acier, convenant à l'emploi dans les opérations de forage et de production dans les industries du pétrole et du gaz naturel.
Les principaux éléments et les longueurs d'une configuration de tige de forage usuelle sont fournis. Les principales dimensions et les masses des gammes de tiges de forage sont indiquées en unités SI et USC.
L'ISO 15546:2011 ne couvre pas les propriétés de performance.
Industrija za predelavo nafte in zemeljskega plina - Vrtalne cevi iz aluminijevih zlitin (ISO 15546:2011)
Ta mednarodni standard določa tehnične dobavne zahteve, proizvodni postopek, materialne zahteve, konfiguracijo in dimenzije ter preverjanje in inšpekcijske postopke za vrtalne cevi iz aluminijeve zlitine z nameščenimi jeklenimi spoji ali brez njih, za uporabo pri vrtanju in proizvodnji v industriji za predelavo nafte in zemeljskega plina. Podana je tipična konfiguracija vrtalne cevi, ki prikazuje glavne elemente in dolžine (glej slike 1-4). Glavne dimenzije in mase razredov vrtalnih cevi so podane v enotah SI in enotah USC (glej dodatek A).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15546:2011
01-november-2011
1DGRPHãþD
SIST EN ISO 15546:2007
Industrija za predelavo nafte in zemeljskega plina - Vrtalne cevi iz aluminijevih
zlitin (ISO 15546:2011)
Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011)
Erdöl- und Erdgasindustrie - Bohrrohre aus Aluminiumlegierungen (ISO 15546:2011)
Industries du pétrole et du gaz naturel - Tige de forage en alliage d'aluminium (ISO
15546:2011)
Ta slovenski standard je istoveten z: EN ISO 15546:2011
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
77.150.10 Aluminijski izdelki Aluminium products
SIST EN ISO 15546:2011 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15546:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 15546:2011
EUROPEAN STANDARD
EN ISO 15546
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2011
ICS 75.180.10; 77.150.10 Supersedes EN ISO 15546:2007
English Version
Petroleum and natural gas industries - Aluminium alloy drill pipe
(ISO 15546:2011)
Industries du pétrole et du gaz naturel - Tige de forage en Erdöl- und Erdgasindustrie - Bohrrohre aus
alliage d'aluminium (ISO 15546:2011) Aluminiumlegierungen (ISO 15546:2011)
This European Standard was approved by CEN on 14 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15546:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15546:2011
EN ISO 15546:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15546:2011
EN ISO 15546:2011 (E)
Foreword
This document (EN ISO 15546:2011) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at
the latest by March 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15546:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 15546:2011 has been approved by CEN as a EN ISO 15546:2011 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 15546:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 15546:2011
INTERNATIONAL ISO
STANDARD 15546
Third edition
2011-09-15
Petroleum and natural gas industries —
Alumin
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.