EN ISO 9454-2:2000
(Main)Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998)
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998)
This standard specifies the performance requirements for fluxes in solid, liquid and paste forms intended for use with soft solders.
Flußmittel zum Weichlötel - Einteilung und Anforderungen - Teil 2: Eignungsanforderungen (ISO 9454-2:1998)
Dieser Teil der ISO 9454 legt die Eignungsanforderungen für Flußmittel in fester, flüssiger und pastöser Form, die zum Weichlöten verwendet werden, fest. ANMERKUNG 1: ISO 9454-1 legt die Anforderungen für Kennzeichnung und Verpackung sowie ein Kurzzeichen-System zur Einteilung der Flußmittel. ANMERKUNG 2: Einige Flußmittel für Schutzgas- und Dampf-Phase-Löten treffen für die Kriterien in den Tabellen 1 und 2 teilweise zu. Die Anforderungen für diese Flußmittel sollen zwischen dem Käufer und dem Lieferanten abgestimmt werden.
Flux de brasage tendre - Classification et caractéristiques - Partie 2: Prescriptions de performance (ISO 9454-2:1998)
La présente partie de l'ISO 9454 fixe les prescriptions de performance pour les flux solides, liquides ou en pâte, destinés à être utilisés avec des métaux d'apport de brasage tendre.NOTE 1 - L'ISO 9454-1 fixe les prescriptions relatives au marquage et à l'emballage ainsi que le système de codification pour la classification des flux.NOTE 2 - Certains flux destinés au brasage tendre en atmosphère inerte et au brasage tendre en phase vapeur peuvent ne pas répondre aux critères indiqués dans les tableaux 1 et 2. Il est recommandé que les prescriptions relatives à ces flux fassent l'objet d'un accord entrel'acheteur et le fournisseur.
Talila za mehko spajkanje - Razvrstitev in zahteve - 2. del: Zahtevane lastnosti (ISO 9454-2:1998)
General Information
- Status
- Withdrawn
- Publication Date
- 18-Apr-2000
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121 - Welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 04-Nov-2020
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 03-Jun-2020
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN ISO 9454-2:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998)". This standard covers: This standard specifies the performance requirements for fluxes in solid, liquid and paste forms intended for use with soft solders.
This standard specifies the performance requirements for fluxes in solid, liquid and paste forms intended for use with soft solders.
EN ISO 9454-2:2000 is classified under the following ICS (International Classification for Standards) categories: 25.160.50 - Brazing and soldering. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 9454-2:2000 has the following relationships with other standards: It is inter standard links to EN ISO 9454-2:2020, EN 3460:2019, EN 3456:2009, EN ISO 12180-1:2011, EN 3451:2017, EN 3459:2010, EN 3444:2006, EN 3446:1995, EN 13085:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 9454-2:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 9454-2:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2001
Talila za mehko spajkanje - Razvrstitev in zahteve - 2. del: Zahtevane lastnosti (ISO
9454-2:1998)
Soft soldering fluxes - Classification and requirements - Part 2: Performance
requirements (ISO 9454-2:1998)
Flußmittel zum Weichlötel - Einteilung und Anforderungen - Teil 2:
Eignungsanforderungen (ISO 9454-2:1998)
Flux de brasage tendre - Classification et caractéristiques - Partie 2: Prescriptions de
performance (ISO 9454-2:1998)
Ta slovenski standard je istoveten z: EN ISO 9454-2:2000
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN ISO 9454-2:20
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...