FprEN 17950
(Main)Protective helmets - Test methods - Shock absorption including measuring rotational kinematics
Protective helmets - Test methods - Shock absorption including measuring rotational kinematics
This document specifies a test method for helmets that measures the translational and rotational kinematics in impacts of a helmeted headform against an anvil.
Schutzhelme - Prüfverfahren - Stoßdämpfung einschließlich Messung der Rotationskinematik
Dieses Dokument legt ein Prüfverfahren für Helme zur Messung der Translations- und Rotationskinematik beim Aufprall eines behelmten Prüfkopfes gegen einen Sockel fest.
Casques de protection - Méthodes d'essai - Absorption des chocs avec mesure de la cinématique de rotation
Le présent document spécifie une méthode d'essai pour les casques qui mesure les cinématiques de translation et de rotation lors d'impacts d'une fausse tête munie d'un casque contre une enclume.
Varovalne čelade - Preskusne metode - Absorpcija udarcev, vključno z merjenjem rotacijske kinematike
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17950:2023
01-april-2023
Varovalne čelade - Preskusne metode - Absorpcija udarcev, vključno z merjenjem
rotacijske kinematike
Protective helmets - Test methods - Shock absorption including measuring rotational
kinematics
Schutzhelme - Prüfverfahren - Stoßdämpfung einschließlich Messung der
Rotationskinematik
Casques de protection - Méthodes d'essai - Absorption des chocs avec mesure de la
cinématique de rotation
Ta slovenski standard je istoveten z: prEN 17950
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
oSIST prEN 17950:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17950:2023
---------------------- Page: 2 ----------------------
oSIST prEN 17950:2023
DRAFT
EUROPEAN STANDARD
prEN 17950
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2023
ICS 13.340.20
English Version
Protective helmets - Test methods - Shock absorption
including measuring rotational kinematics
Casques de protection - Méthodes d'essai - Absorption Schutzhelme - Prüfverfahren - Stoßdämpfung
des chocs avec mesure de la cinématique de rotation einschließlich Messung der Rotationskinematik
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 158.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17950:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17950:2023
prEN 17950:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Prerequisites . 7
4.1 Parameters needed . 7
4.2 Head form . 7
4.2.1 General. 7
4.2.2 External geometry . 7
4.2.3 Head form specifications . 7
4.2.4 Outer surface specification .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.